linux-stable.git/drivers/scsi, branch v5.4.151

scsi: csiostor: Add module softdep on cxgb4

2021-10-06T13:42:34+00:00

[ Upstream commit 79a7482249a7353bc86aff8127954d5febf02472 ]

Both cxgb4 and csiostor drivers run on their own independent Physical
Function. But when cxgb4 and csiostor are both being loaded in parallel via
modprobe, there is a race when firmware upgrade is attempted by both the
drivers.

When the cxgb4 driver initiates the firmware upgrade, it halts the firmware
and the chip until upgrade is complete. When the csiostor driver is coming
up in parallel, the firmware mailbox communication fails with timeouts and
the csiostor driver probe fails.

Add a module soft dependency on cxgb4 driver to ensure loading csiostor
triggers cxgb4 to load first when available to avoid the firmware upgrade
race.

Link: https://lore.kernel.org/r/1632759248-15382-1-git-send-email-rahul.lakkireddy@chelsio.com
Fixes: a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Signed-off-by: Rahul Lakkireddy 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: ufs: Fix illegal offset in UPIU event trace

2021-10-06T13:42:31+00:00

commit e8c2da7e329ce004fee748b921e4c765dc2fa338 upstream.

Fix incorrect index for UTMRD reference in ufshcd_add_tm_upiu_trace().

Link: https://lore.kernel.org/r/20210924085848.25500-1-jonathan.hsu@mediatek.com
Fixes: 4b42d557a8ad ("scsi: ufs: core: Fix wrong Task Tag used in task management request UPIUs")
Cc: stable@vger.kernel.org
Reviewed-by: Stanley Chu 
Reviewed-by: Bart Van Assche 
Signed-off-by: Jonathan Hsu 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Use correct scnprintf() limit

2021-09-30T08:09:24+00:00

[ Upstream commit 6dacc371b77f473770ec646e220303a84fe96c11 ]

The limit should be "PAGE_SIZE - len" instead of "PAGE_SIZE".  We're not
going to hit the limit so this fix will not affect runtime.

Link: https://lore.kernel.org/r/20210916132331.GE25094@kili
Fixes: 5b9e70b22cc5 ("scsi: lpfc: raise sg count for nvme to use available sg resources")
Reviewed-by: James Smart 
Signed-off-by: Dan Carpenter 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: qla2xxx: Restore initiator in dual mode

2021-09-30T08:09:24+00:00

[ Upstream commit 5f8579038842d77e6ce05e1df6bf9dd493b0e3ef ]

In dual mode in case of disabling the target, the whole port goes offline
and initiator is turned off too.

Fix restoring initiator mode after disabling target in dual mode.

Link: https://lore.kernel.org/r/20210915153239.8035-1-d.bogdanov@yadro.com
Fixes: 0645cb8350cd ("scsi: qla2xxx: Add mode control for each physical port")
Reviewed-by: Himanshu Madhani 
Signed-off-by: Dmitry Bogdanov 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: iscsi: Adjust iface sysfs attr detection

2021-09-30T08:09:23+00:00

[ Upstream commit 4e28550829258f7dab97383acaa477bd724c0ff4 ]

ISCSI_NET_PARAM_IFACE_ENABLE belongs to enum iscsi_net_param instead of
iscsi_iface_param so move it to ISCSI_NET_PARAM. Otherwise, when we call
into the driver, we might not match and return that we don't want attr
visible in sysfs. Found in code review.

Link: https://lore.kernel.org/r/20210901085336.2264295-1-libaokun1@huawei.com
Fixes: e746f3451ec7 ("scsi: iscsi: Fix iface sysfs attr detection")
Reviewed-by: Lee Duncan 
Signed-off-by: Baokun Li 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: qla2xxx: Sync queue idx with queue_pair_map idx

2021-09-22T10:26:37+00:00

commit c8fadf019964d0eb1da410ba8b629494d3339db9 upstream.

The first invocation of function find_first_zero_bit will return 0 and
queue_id gets set to 0.

An index of queue_pair_map also gets set to 0.

	qpair_id = find_first_zero_bit(ha->qpair_qid_map, ha->max_qpairs);

        set_bit(qpair_id, ha->qpair_qid_map);
        ha->queue_pair_map[qpair_id] = qpair;

In the alloc_queue callback driver checks the map, if queue is already
allocated:

	ha->queue_pair_map[qidx]

This works fine as long as max_qpairs is greater than nvme_max_hw_queues(8)
since the size of the queue_pair_map is equal to max_qpair. In case nr_cpus
is less than 8, max_qpairs is less than 8. This creates wrong value
returned as qpair.

[ 1572.353669] qla2xxx [0000:24:00.3]-2121:6: Returning existing qpair of 4e00000000000000 for idx=2
[ 1572.354458] general protection fault: 0000 [#1] SMP PTI
[ 1572.354461] CPU: 1 PID: 44 Comm: kworker/1:1H Kdump: loaded Tainted: G          IOE    --------- -  - 4.18.0-304.el8.x86_64 #1
[ 1572.354462] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 03/01/2013
[ 1572.354467] Workqueue: kblockd blk_mq_run_work_fn
[ 1572.354485] RIP: 0010:qla_nvme_post_cmd+0x92/0x760 [qla2xxx]
[ 1572.354486] Code: 84 24 5c 01 00 00 00 00 b8 0a 74 1e 66 83 79 48 00 0f 85 a8 03 00 00 48 8b 44 24 08 48 89 ee 4c 89 e7 8b 50 24 e8 5e 8e 00 00  41 ff 47 04 0f ae f0 41 f6 47 24 04 74 19 f0 41 ff 4f 04 b8 f0
[ 1572.354487] RSP: 0018:ffff9c81c645fc90 EFLAGS: 00010246
[ 1572.354489] RAX: 0000000000000001 RBX: ffff8ea3e5070138 RCX: 0000000000000001
[ 1572.354490] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8ea4c866b800
[ 1572.354491] RBP: ffff8ea4c866b800 R08: 0000000000005010 R09: ffff8ea4c866b800
[ 1572.354492] R10: 0000000000000001 R11: 000000069d1ca3ff R12: ffff8ea4bc460000
[ 1572.354493] R13: ffff8ea3e50702b0 R14: ffff8ea4c4c16a58 R15: 4e00000000000000
[ 1572.354494] FS:  0000000000000000(0000) GS:ffff8ea4dfd00000(0000) knlGS:0000000000000000
[ 1572.354495] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1572.354496] CR2: 000055884504fa58 CR3: 00000005a1410001 CR4: 00000000000606e0
[ 1572.354497] Call Trace:
[ 1572.354503]  ? check_preempt_curr+0x62/0x90
[ 1572.354506]  ? dma_direct_map_sg+0x72/0x1f0
[ 1572.354509]  ? nvme_fc_start_fcp_op.part.32+0x175/0x460 [nvme_fc]
[ 1572.354511]  ? blk_mq_dispatch_rq_list+0x11c/0x730
[ 1572.354515]  ? __switch_to_asm+0x35/0x70
[ 1572.354516]  ? __switch_to_asm+0x41/0x70
[ 1572.354518]  ? __switch_to_asm+0x35/0x70
[ 1572.354519]  ? __switch_to_asm+0x41/0x70
[ 1572.354521]  ? __switch_to_asm+0x35/0x70
[ 1572.354522]  ? __switch_to_asm+0x41/0x70
[ 1572.354523]  ? __switch_to_asm+0x35/0x70
[ 1572.354525]  ? entry_SYSCALL_64_after_hwframe+0xb9/0xca
[ 1572.354527]  ? __switch_to_asm+0x41/0x70
[ 1572.354529]  ? __blk_mq_sched_dispatch_requests+0xc6/0x170
[ 1572.354531]  ? blk_mq_sched_dispatch_requests+0x30/0x60
[ 1572.354532]  ? __blk_mq_run_hw_queue+0x51/0xd0
[ 1572.354535]  ? process_one_work+0x1a7/0x360
[ 1572.354537]  ? create_worker+0x1a0/0x1a0
[ 1572.354538]  ? worker_thread+0x30/0x390
[ 1572.354540]  ? create_worker+0x1a0/0x1a0
[ 1572.354541]  ? kthread+0x116/0x130
[ 1572.354543]  ? kthread_flush_work_fn+0x10/0x10
[ 1572.354545]  ? ret_from_fork+0x35/0x40

Fix is to use index 0 for admin and first IO queue.

Link: https://lore.kernel.org/r/20210810043720.1137-14-njavali@marvell.com
Fixes: e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani 
Signed-off-by: Saurav Kashyap 
Signed-off-by: Nilesh Javali 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Changes to support kdump kernel

2021-09-22T10:26:37+00:00

commit 62e0dec59c1e139dab55aff5aa442adc97804271 upstream.

Avoid allocating firmware dump and only allocate a single queue for a kexec
kernel.

Link: https://lore.kernel.org/r/20210810043720.1137-12-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani 
Signed-off-by: Saurav Kashyap 
Signed-off-by: Nilesh Javali 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: BusLogic: Fix missing pr_cont() use

2021-09-22T10:26:37+00:00

commit 44d01fc86d952f5a8b8b32bdb4841504d5833d95 upstream.

Update BusLogic driver's messaging system to use pr_cont() for continuation
lines, bringing messy output:

pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff 
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0:   Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level
scsi0:   PCI Bus: 0, Device: 19, Address:
0xE0012000,
Host Adapter SCSI ID: 7
scsi0:   Parity Checking: Enabled, Extended Translation: Enabled
scsi0:   Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0:   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0:   Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0:   Tagged Queue Depth:
Automatic
, Untagged Queue Depth: 3
scsi0:   SCSI Bus Termination: Both Enabled
, SCAM: Disabled

scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi host0: BusLogic BT-958

back to order:

pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff 
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0:   Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level
scsi0:   PCI Bus: 0, Device: 19, Address: 0xE0012000, Host Adapter SCSI ID: 7
scsi0:   Parity Checking: Enabled, Extended Translation: Enabled
scsi0:   Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0:   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0:   Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0:   Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
scsi0:   SCSI Bus Termination: Both Enabled, SCAM: Disabled
scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi host0: BusLogic BT-958

Also diagnostic output such as with the BusLogic=TraceConfiguration
parameter is affected and becomes vertical and therefore hard to read.
This has now been corrected, e.g.:

pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
blogic_cmd(86) Status = 30:  4 ==>  4: FF 05 93 00
blogic_cmd(95) Status = 28: (Modify I/O Address)
blogic_cmd(91) Status = 30:  1 ==>  1: 01
blogic_cmd(04) Status = 30:  4 ==>  4: 41 41 35 30
blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff 
blogic_cmd(04) Status = 30:  4 ==>  4: 41 41 35 30
blogic_cmd(0B) Status = 30:  3 ==>  3: 00 08 07
blogic_cmd(0D) Status = 30: 34 ==> 34: 03 01 07 04 00 00 00 00 00 00 00 00 00 00 00 00 FF 42 44 46 FF 00 00 00 00 00 00 00 00 00 FF 00 FF 00
blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D
blogic_cmd(84) Status = 30:  1 ==>  1: 37
blogic_cmd(8B) Status = 30:  5 ==>  5: 39 35 38 20 20
blogic_cmd(85) Status = 30:  1 ==>  1: 42
blogic_cmd(86) Status = 30:  4 ==>  4: FF 05 93 00
blogic_cmd(91) Status = 30: 64 ==> 64: 41 46 3E 20 39 35 38 20 20 00 C4 00 04 01 07 2F 07 04 35 FF FF FF FF FF FF FF FF FF FF 01 00 FE FF 08 FF FF 00 00 00 00 00 00 00 01 00 01 00 00 FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 FC
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter

etc.

Link: https://lore.kernel.org/r/alpine.DEB.2.21.2104201940430.44318@angie.orcam.me.uk
Fixes: 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines")
Cc: stable@vger.kernel.org # v4.9+
Acked-by: Khalid Aziz 
Signed-off-by: Maciej W. Rozycki 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: qedf: Fix error codes in qedf_alloc_global_queues()

2021-09-22T10:26:24+00:00

[ Upstream commit ccc89737aa6b9f248cf1623014038beb6c2b7f56 ]

This driver has some left over "return 1" on failure style code mixed with
"return negative error codes" style code.  The caller doesn't care so we
should just convert everything to return negative error codes.

Then there was a problem that there were two variables used to store error
codes which just resulted in confusion.  If qedf_alloc_bdq() returned a
negative error code, we accidentally returned success instead of
propagating the error code.  So get rid of the "rc" variable and use
"status" every where.

Also remove the "status = 0" initialization so that these sorts of bugs
will be detected by the compiler in the future.

Link: https://lore.kernel.org/r/20210810085023.GA23998@kili
Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Acked-by: Manish Rangankar 
Signed-off-by: Dan Carpenter 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: qedi: Fix error codes in qedi_alloc_global_queues()

2021-09-22T10:26:24+00:00

[ Upstream commit 4dbe57d46d54a847875fa33e7d05877bb341585e ]

This function had some left over code that returned 1 on error instead
negative error codes.  Convert everything to use negative error codes.  The
caller treats all non-zero returns the same so this does not affect run
time.

A couple places set "rc" instead of "status" so those error paths ended up
returning success by mistake.  Get rid of the "rc" variable and use
"status" everywhere.

Remove the bogus "status = 0" initialization, as a future proofing measure
so the compiler will warn about uninitialized error codes.

Link: https://lore.kernel.org/r/20210810084753.GD23810@kili
Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Acked-by: Manish Rangankar 
Signed-off-by: Dan Carpenter 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin