linux-stable.git/drivers/scsi, branch v5.4.136

scsi: iscsi: Fix iface sysfs attr detection

2021-07-28T11:30:56+00:00

[ Upstream commit e746f3451ec7f91dcc9fd67a631239c715850a34 ]

A ISCSI_IFACE_PARAM can have the same value as a ISCSI_NET_PARAM so when
iscsi_iface_attr_is_visible tries to figure out the type by just checking
the value, we can collide and return the wrong type. When we call into the
driver we might not match and return that we don't want attr visible in
sysfs. The patch fixes this by setting the type when we figure out what the
param is.

Link: https://lore.kernel.org/r/20210701002559.89533-1-michael.christie@oracle.com
Fixes: 3e0f65b34cc9 ("[SCSI] iscsi_transport: Additional parameters for network settings")
Signed-off-by: Mike Christie 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: qedf: Add check to synchronize abort and flush

2021-07-25T12:35:13+00:00

[ Upstream commit df99446d5c2a63dc6e6920c8090da0e9da6539d5 ]

A race condition was observed between qedf_cleanup_fcport() and
qedf_process_error_detect()->qedf_initiate_abts():

 [2069091.203145] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
 [2069091.213100] IP: [] qedf_process_error_detect+0x96/0x130 [qedf]
 [2069091.223391] PGD 1943049067 PUD 194304e067 PMD 0
 [2069091.233420] Oops: 0000 [#1] SMP
 [2069091.361820] CPU: 1 PID: 14751 Comm: kworker/1:46 Kdump: loaded Tainted: P           OE  ------------   3.10.0-1160.25.1.el7.x86_64 #1
 [2069091.388474] Hardware name: HPE Synergy 480 Gen10/Synergy 480 Gen10 Compute Module, BIOS I42 04/08/2020
 [2069091.402148] Workqueue: qedf_io_wq qedf_fp_io_handler [qedf]
 [2069091.415780] task: ffff9bb9f5190000 ti: ffff9bacaef9c000 task.ti: ffff9bacaef9c000
 [2069091.429590] RIP: 0010:[]  [] qedf_process_error_detect+0x96/0x130 [qedf]
 [2069091.443666] RSP: 0018:ffff9bacaef9fdb8  EFLAGS: 00010246
 [2069091.457692] RAX: 0000000000000000 RBX: ffff9bbbbbfb18a0 RCX: ffffffffc0672310
 [2069091.471997] RDX: 00000000000005de RSI: ffffffffc066e7f0 RDI: ffff9beb3f4538d8
 [2069091.486130] RBP: ffff9bacaef9fdd8 R08: 0000000000006000 R09: 0000000000006000
 [2069091.500321] R10: 0000000000001551 R11: ffffb582996ffff8 R12: ffffb5829b39cc18
 [2069091.514779] R13: ffff9badab380c28 R14: ffffd5827f643900 R15: 0000000000000040
 [2069091.529472] FS:  0000000000000000(0000) GS:ffff9beb3f440000(0000) knlGS:0000000000000000
 [2069091.543926] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [2069091.558942] CR2: 0000000000000030 CR3: 000000193b9a2000 CR4: 00000000007607e0
 [2069091.573424] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 [2069091.587876] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 [2069091.602007] PKRU: 00000000
 [2069091.616010] Call Trace:
 [2069091.629902]  [] qedf_process_cqe+0x109/0x2e0 [qedf]
 [2069091.643941]  [] qedf_fp_io_handler+0x26/0x60 [qedf]
 [2069091.657948]  [] process_one_work+0x17f/0x440
 [2069091.672111]  [] worker_thread+0x126/0x3c0
 [2069091.686057]  [] ? manage_workers.isra.26+0x2a0/0x2a0
 [2069091.700033]  [] kthread+0xd1/0xe0
 [2069091.713891]  [] ? insert_kthread_work+0x40/0x40

Add check in qedf_process_error_detect(). When flush is active, let the
cmds be completed from the cleanup contex.

Link: https://lore.kernel.org/r/20210624171802.598-1-jhasan@marvell.com
Signed-off-by: Javed Hasan 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: libfc: Fix array index out of bound exception

2021-07-25T12:35:13+00:00

[ Upstream commit b27c4577557045f1ab3cdfeabfc7f3cd24aca1fe ]

Fix array index out of bound exception in fc_rport_prli_resp().

Link: https://lore.kernel.org/r/20210615165939.24327-1-jhasan@marvell.com
Signed-off-by: Javed Hasan 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: libsas: Add LUN number check in .slave_alloc callback

2021-07-25T12:35:13+00:00

[ Upstream commit 49da96d77938db21864dae6b7736b71e96c1d203 ]

Offlining a SATA device connected to a hisi SAS controller and then
scanning the host will result in detecting 255 non-existent devices:

  # lsscsi
  [2:0:0:0]    disk    ATA      Samsung SSD 860  2B6Q  /dev/sda
  [2:0:1:0]    disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdb
  [2:0:2:0]    disk    SEAGATE  ST600MM0006      B001  /dev/sdc
  # echo "offline" > /sys/block/sdb/device/state
  # echo "- - -" > /sys/class/scsi_host/host2/scan
  # lsscsi
  [2:0:0:0]    disk    ATA      Samsung SSD 860  2B6Q  /dev/sda
  [2:0:1:0]    disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdb
  [2:0:1:1]    disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdh
  ...
  [2:0:1:255]  disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdjb

After a REPORT LUN command issued to the offline device fails, the SCSI
midlayer tries to do a sequential scan of all devices whose LUN number is
not 0. However, SATA does not support LUN numbers at all.

Introduce a generic sas_slave_alloc() handler which will return -ENXIO for
SATA devices if the requested LUN number is larger than 0 and make libsas
drivers use this function as their .slave_alloc callback.

Link: https://lore.kernel.org/r/20210622034037.1467088-1-yuyufen@huawei.com
Reported-by: Wu Bo 
Suggested-by: John Garry 
Reviewed-by: John Garry 
Reviewed-by: Jason Yan 
Signed-off-by: Yufen Yu 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8

2021-07-25T12:35:12+00:00

[ Upstream commit 332a9dd1d86f1e7203fc7f0fd7e82f0b304200fe ]

The shifting of the u8 integer returned fom ahc_inb(ahc, port+3) by 24 bits
to the left will be promoted to a 32 bit signed int and then sign-extended
to a u64. In the event that the top bit of the u8 is set then all then all
the upper 32 bits of the u64 end up as also being set because of the
sign-extension. Fix this by casting the u8 values to a u64 before the 24
bit left shift.

[ This dates back to 2002, I found the offending commit from the git
history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git,
commit f58eb66c0b0a ("Update aic7xxx driver to 6.2.10...") ]

Link: https://lore.kernel.org/r/20210621151727.20667-1-colin.king@canonical.com
Signed-off-by: Colin Ian King 
Signed-off-by: Martin K. Petersen 
Addresses-Coverity: ("Unintended sign extension")
Signed-off-by: Sasha Levin

scsi: scsi_dh_alua: Fix signedness bug in alua_rtpg()

2021-07-20T14:10:53+00:00

commit 80927822e8b6be46f488524cd7d5fe683de97fc4 upstream.

The "retval" variable needs to be signed for the error handling to work.

Link: https://lore.kernel.org/r/YLjMEAFNxOas1mIp@mwanda
Fixes: 7e26e3ea0287 ("scsi: scsi_dh_alua: Check for negative result value")
Reviewed-by: Martin Wilck 
Signed-off-by: Dan Carpenter 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()

2021-07-20T14:10:53+00:00

[ Upstream commit 030e4138d11fced3b831c2761e4cecf347bae99c ]

If an error occurs after a pci_enable_pcie_error_reporting() call, it must
be undone by a corresponding pci_disable_pcie_error_reporting() call, as
already done in the remove function.

Link: https://lore.kernel.org/r/77adb02cfea7f1364e5603ecf3930d8597ae356e.1623482155.git.christophe.jaillet@wanadoo.fr
Fixes: 3567f36a09d1 ("[SCSI] be2iscsi: Fix AER handling in driver")
Signed-off-by: Christophe JAILLET 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: qedi: Fix null ref during abort handling

2021-07-20T14:10:43+00:00

[ Upstream commit 5777b7f0f03ce49372203b6521631f62f2810c8f ]

If qedi_process_cmd_cleanup_resp finds the cmd it frees the work and sets
list_tmf_work to NULL, so qedi_tmf_work should check if list_tmf_work is
non-NULL when it wants to force cleanup.

Link: https://lore.kernel.org/r/20210525181821.7617-20-michael.christie@oracle.com
Reviewed-by: Manish Rangankar 
Signed-off-by: Mike Christie 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: iscsi: Fix shost->max_id use

2021-07-20T14:10:43+00:00

[ Upstream commit bdd4aad7ff92ae39c2e93c415bb6761cb8b584da ]

The iscsi offload drivers are setting the shost->max_id to the max number
of sessions they support. The problem is that max_id is not the max number
of targets but the highest identifier the targets can have. To use it to
limit the number of targets we need to set it to max sessions - 1, or we
can end up with a session we might not have preallocated resources for.

Link: https://lore.kernel.org/r/20210525181821.7617-15-michael.christie@oracle.com
Reviewed-by: Lee Duncan 
Signed-off-by: Mike Christie 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: iscsi: Fix conn use after free during resets

2021-07-20T14:10:43+00:00

[ Upstream commit ec29d0ac29be366450a7faffbcf8cba3a6a3b506 ]

If we haven't done a unbind target call we can race where
iscsi_conn_teardown wakes up the EH thread and then frees the conn while
those threads are still accessing the conn ehwait.

We can only do one TMF per session so this just moves the TMF fields from
the conn to the session. We can then rely on the
iscsi_session_teardown->iscsi_remove_session->__iscsi_unbind_session call
to remove the target and it's devices, and know after that point there is
no device or scsi-ml callout trying to access the session.

Link: https://lore.kernel.org/r/20210525181821.7617-14-michael.christie@oracle.com
Reviewed-by: Lee Duncan 
Signed-off-by: Mike Christie 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin