linux-stable.git/drivers/scsi, branch v5.14.7

scsi: qla2xxx: Sync queue idx with queue_pair_map idx

2021-09-18T11:44:01+00:00

commit c8fadf019964d0eb1da410ba8b629494d3339db9 upstream.

The first invocation of function find_first_zero_bit will return 0 and
queue_id gets set to 0.

An index of queue_pair_map also gets set to 0.

	qpair_id = find_first_zero_bit(ha->qpair_qid_map, ha->max_qpairs);

        set_bit(qpair_id, ha->qpair_qid_map);
        ha->queue_pair_map[qpair_id] = qpair;

In the alloc_queue callback driver checks the map, if queue is already
allocated:

	ha->queue_pair_map[qidx]

This works fine as long as max_qpairs is greater than nvme_max_hw_queues(8)
since the size of the queue_pair_map is equal to max_qpair. In case nr_cpus
is less than 8, max_qpairs is less than 8. This creates wrong value
returned as qpair.

[ 1572.353669] qla2xxx [0000:24:00.3]-2121:6: Returning existing qpair of 4e00000000000000 for idx=2
[ 1572.354458] general protection fault: 0000 [#1] SMP PTI
[ 1572.354461] CPU: 1 PID: 44 Comm: kworker/1:1H Kdump: loaded Tainted: G          IOE    --------- -  - 4.18.0-304.el8.x86_64 #1
[ 1572.354462] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 03/01/2013
[ 1572.354467] Workqueue: kblockd blk_mq_run_work_fn
[ 1572.354485] RIP: 0010:qla_nvme_post_cmd+0x92/0x760 [qla2xxx]
[ 1572.354486] Code: 84 24 5c 01 00 00 00 00 b8 0a 74 1e 66 83 79 48 00 0f 85 a8 03 00 00 48 8b 44 24 08 48 89 ee 4c 89 e7 8b 50 24 e8 5e 8e 00 00  41 ff 47 04 0f ae f0 41 f6 47 24 04 74 19 f0 41 ff 4f 04 b8 f0
[ 1572.354487] RSP: 0018:ffff9c81c645fc90 EFLAGS: 00010246
[ 1572.354489] RAX: 0000000000000001 RBX: ffff8ea3e5070138 RCX: 0000000000000001
[ 1572.354490] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8ea4c866b800
[ 1572.354491] RBP: ffff8ea4c866b800 R08: 0000000000005010 R09: ffff8ea4c866b800
[ 1572.354492] R10: 0000000000000001 R11: 000000069d1ca3ff R12: ffff8ea4bc460000
[ 1572.354493] R13: ffff8ea3e50702b0 R14: ffff8ea4c4c16a58 R15: 4e00000000000000
[ 1572.354494] FS:  0000000000000000(0000) GS:ffff8ea4dfd00000(0000) knlGS:0000000000000000
[ 1572.354495] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1572.354496] CR2: 000055884504fa58 CR3: 00000005a1410001 CR4: 00000000000606e0
[ 1572.354497] Call Trace:
[ 1572.354503]  ? check_preempt_curr+0x62/0x90
[ 1572.354506]  ? dma_direct_map_sg+0x72/0x1f0
[ 1572.354509]  ? nvme_fc_start_fcp_op.part.32+0x175/0x460 [nvme_fc]
[ 1572.354511]  ? blk_mq_dispatch_rq_list+0x11c/0x730
[ 1572.354515]  ? __switch_to_asm+0x35/0x70
[ 1572.354516]  ? __switch_to_asm+0x41/0x70
[ 1572.354518]  ? __switch_to_asm+0x35/0x70
[ 1572.354519]  ? __switch_to_asm+0x41/0x70
[ 1572.354521]  ? __switch_to_asm+0x35/0x70
[ 1572.354522]  ? __switch_to_asm+0x41/0x70
[ 1572.354523]  ? __switch_to_asm+0x35/0x70
[ 1572.354525]  ? entry_SYSCALL_64_after_hwframe+0xb9/0xca
[ 1572.354527]  ? __switch_to_asm+0x41/0x70
[ 1572.354529]  ? __blk_mq_sched_dispatch_requests+0xc6/0x170
[ 1572.354531]  ? blk_mq_sched_dispatch_requests+0x30/0x60
[ 1572.354532]  ? __blk_mq_run_hw_queue+0x51/0xd0
[ 1572.354535]  ? process_one_work+0x1a7/0x360
[ 1572.354537]  ? create_worker+0x1a0/0x1a0
[ 1572.354538]  ? worker_thread+0x30/0x390
[ 1572.354540]  ? create_worker+0x1a0/0x1a0
[ 1572.354541]  ? kthread+0x116/0x130
[ 1572.354543]  ? kthread_flush_work_fn+0x10/0x10
[ 1572.354545]  ? ret_from_fork+0x35/0x40

Fix is to use index 0 for admin and first IO queue.

Link: https://lore.kernel.org/r/20210810043720.1137-14-njavali@marvell.com
Fixes: e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani 
Signed-off-by: Saurav Kashyap 
Signed-off-by: Nilesh Javali 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Changes to support kdump kernel

2021-09-18T11:44:01+00:00

commit 62e0dec59c1e139dab55aff5aa442adc97804271 upstream.

Avoid allocating firmware dump and only allocate a single queue for a kexec
kernel.

Link: https://lore.kernel.org/r/20210810043720.1137-12-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani 
Signed-off-by: Saurav Kashyap 
Signed-off-by: Nilesh Javali 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: BusLogic: Fix missing pr_cont() use

2021-09-18T11:44:01+00:00

commit 44d01fc86d952f5a8b8b32bdb4841504d5833d95 upstream.

Update BusLogic driver's messaging system to use pr_cont() for continuation
lines, bringing messy output:

pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff 
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0:   Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level
scsi0:   PCI Bus: 0, Device: 19, Address:
0xE0012000,
Host Adapter SCSI ID: 7
scsi0:   Parity Checking: Enabled, Extended Translation: Enabled
scsi0:   Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0:   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0:   Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0:   Tagged Queue Depth:
Automatic
, Untagged Queue Depth: 3
scsi0:   SCSI Bus Termination: Both Enabled
, SCAM: Disabled

scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi host0: BusLogic BT-958

back to order:

pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff 
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0:   Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level
scsi0:   PCI Bus: 0, Device: 19, Address: 0xE0012000, Host Adapter SCSI ID: 7
scsi0:   Parity Checking: Enabled, Extended Translation: Enabled
scsi0:   Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0:   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0:   Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0:   Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
scsi0:   SCSI Bus Termination: Both Enabled, SCAM: Disabled
scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi host0: BusLogic BT-958

Also diagnostic output such as with the BusLogic=TraceConfiguration
parameter is affected and becomes vertical and therefore hard to read.
This has now been corrected, e.g.:

pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
blogic_cmd(86) Status = 30:  4 ==>  4: FF 05 93 00
blogic_cmd(95) Status = 28: (Modify I/O Address)
blogic_cmd(91) Status = 30:  1 ==>  1: 01
blogic_cmd(04) Status = 30:  4 ==>  4: 41 41 35 30
blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff 
blogic_cmd(04) Status = 30:  4 ==>  4: 41 41 35 30
blogic_cmd(0B) Status = 30:  3 ==>  3: 00 08 07
blogic_cmd(0D) Status = 30: 34 ==> 34: 03 01 07 04 00 00 00 00 00 00 00 00 00 00 00 00 FF 42 44 46 FF 00 00 00 00 00 00 00 00 00 FF 00 FF 00
blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D
blogic_cmd(84) Status = 30:  1 ==>  1: 37
blogic_cmd(8B) Status = 30:  5 ==>  5: 39 35 38 20 20
blogic_cmd(85) Status = 30:  1 ==>  1: 42
blogic_cmd(86) Status = 30:  4 ==>  4: FF 05 93 00
blogic_cmd(91) Status = 30: 64 ==> 64: 41 46 3E 20 39 35 38 20 20 00 C4 00 04 01 07 2F 07 04 35 FF FF FF FF FF FF FF FF FF FF 01 00 FE FF 08 FF FF 00 00 00 00 00 00 00 01 00 01 00 00 FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 FC
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter

etc.

Link: https://lore.kernel.org/r/alpine.DEB.2.21.2104201940430.44318@angie.orcam.me.uk
Fixes: 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines")
Cc: stable@vger.kernel.org # v4.9+
Acked-by: Khalid Aziz 
Signed-off-by: Maciej W. Rozycki 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: ufs: ufs-exynos: Fix static checker warning

2021-09-18T11:43:32+00:00

[ Upstream commit 313bf281f2091552f509fd05a74172c70ce7572f ]

clk_get_rate() returns unsigned long and currently this driver stores the
return value in u32 type, resulting the below warning:

Fixed smatch warnings:

        drivers/scsi/ufs/ufs-exynos.c:286 exynos_ufs_get_clk_info()
        warn: wrong type for 'ufs->mclk_rate' (should be 'ulong')

        drivers/scsi/ufs/ufs-exynos.c:287 exynos_ufs_get_clk_info()
        warn: wrong type for 'pclk_rate' (should be 'ulong')

Link: https://lore.kernel.org/r/20210819171131.55912-1-alim.akhtar@samsung.com
Fixes: 55f4b1f73631 ("scsi: ufs: ufs-exynos: Add UFS host support for Exynos SoCs")
Reported-by: Dan Carpenter 
Signed-off-by: Alim Akhtar 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: qedf: Fix error codes in qedf_alloc_global_queues()

2021-09-18T11:43:30+00:00

[ Upstream commit ccc89737aa6b9f248cf1623014038beb6c2b7f56 ]

This driver has some left over "return 1" on failure style code mixed with
"return negative error codes" style code.  The caller doesn't care so we
should just convert everything to return negative error codes.

Then there was a problem that there were two variables used to store error
codes which just resulted in confusion.  If qedf_alloc_bdq() returned a
negative error code, we accidentally returned success instead of
propagating the error code.  So get rid of the "rc" variable and use
"status" every where.

Also remove the "status = 0" initialization so that these sorts of bugs
will be detected by the compiler in the future.

Link: https://lore.kernel.org/r/20210810085023.GA23998@kili
Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Acked-by: Manish Rangankar 
Signed-off-by: Dan Carpenter 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: qedi: Fix error codes in qedi_alloc_global_queues()

2021-09-18T11:43:30+00:00

[ Upstream commit 4dbe57d46d54a847875fa33e7d05877bb341585e ]

This function had some left over code that returned 1 on error instead
negative error codes.  Convert everything to use negative error codes.  The
caller treats all non-zero returns the same so this does not affect run
time.

A couple places set "rc" instead of "status" so those error paths ended up
returning success by mistake.  Get rid of the "rc" variable and use
"status" everywhere.

Remove the bogus "status = 0" initialization, as a future proofing measure
so the compiler will warn about uninitialized error codes.

Link: https://lore.kernel.org/r/20210810084753.GD23810@kili
Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Acked-by: Manish Rangankar 
Signed-off-by: Dan Carpenter 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: smartpqi: Fix an error code in pqi_get_raid_map()

2021-09-18T11:43:30+00:00

[ Upstream commit d1f6581a6796c4e9fd8a4a24e8b77463d18f0df1 ]

Return -EINVAL on failure instead of success.

Link: https://lore.kernel.org/r/20210810084613.GB23810@kili
Fixes: a91aaae0243b ("scsi: smartpqi: allow for larger raid maps")
Signed-off-by: Dan Carpenter 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: fdomain: Fix error return code in fdomain_probe()

2021-09-18T11:43:30+00:00

[ Upstream commit 632c4ae6da1d629eddf9da1e692d7617c568c256 ]

If request_region() fails the return value is not set. Return -EBUSY on
error.

Link: https://lore.kernel.org/r/20210715032625.1395495-1-liwei391@huawei.com
Fixes: 8674a8aa2c39 ("scsi: fdomain: Add PCMCIA support")
Reported-by: Hulk Robot 
Signed-off-by: Wei Li 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: ufshcd: Fix device links when BOOT WLUN fails to probe

2021-09-18T11:43:30+00:00

[ Upstream commit bf25967ac54129ffb676ee0dbe3b8b34af6c6232 ]

Managed device links are deleted by device_del(). However it is possible to
add a device link to a consumer before device_add(), and then discovering
an error prevents the device from being used. In that case normally
references to the device would be dropped and the device would be deleted.
However the device link holds a reference to the device, so the device link
and device remain indefinitely (unless the supplier is deleted).

For UFSHCD, if a LUN fails to probe (e.g. absent BOOT WLUN), the device
will not have been registered but can still have a device link holding a
reference to the device. The unwanted device link will prevent runtime
suspend indefinitely.

Amend device link removal to accept removal of a link with an unregistered
consumer device (suggested by Rafael), and fix UFSHCD by explicitly
deleting the device link when SCSI destroys the SCSI device.

Link: https://lore.kernel.org/r/a1c9bac8-b560-b662-f0aa-58c7e000cbbd@intel.com
Fixes: b294ff3e3449 ("scsi: ufs: core: Enable power management for wlun")
Reviewed-by: Rafael J. Wysocki 
Signed-off-by: Adrian Hunter 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: ufs: Fix unsigned int compared with less than zero

2021-09-18T11:43:29+00:00

[ Upstream commit a5402cdcc2a925835db89ea336909b2b724189df ]

Variable 'tag' is currently an unsigned int and is being compared to less
than zero, this check is always false. Fix this by making 'tag' an int.

Link: https://lore.kernel.org/r/20210806144301.19864-1-colin.king@canonical.com
Fixes: 4728ab4a8e64 ("scsi: ufs: Remove ufshcd_valid_tag()")
Reviewed-by: Bart Van Assche 
Signed-off-by: Colin Ian King 
Signed-off-by: Martin K. Petersen 
Addresses-Coverity: ("Macro compares unsigned to 0")
Signed-off-by: Sasha Levin