linux-stable.git/drivers/scsi, branch v4.9.288

scsi: virtio_scsi: Fix spelling mistake "Unsupport" -> "Unsupported"

2021-10-17T08:05:40+00:00

[ Upstream commit cced4c0ec7c06f5230a2958907a409c849762293 ]

There are a couple of spelling mistakes in pr_info and pr_err messages.
Fix them.

Link: https://lore.kernel.org/r/20210924230330.143785-1-colin.king@canonical.com
Signed-off-by: Colin Ian King 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: ses: Fix unsigned comparison with less than zero

2021-10-17T08:05:40+00:00

[ Upstream commit dd689ed5aa905daf4ba4c99319a52aad6ea0a796 ]

Fix the following coccicheck warning:

./drivers/scsi/ses.c:137:10-16: WARNING: Unsigned expression compared
with zero: result > 0.

Link: https://lore.kernel.org/r/1632477113-90378-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot 
Signed-off-by: Jiapeng Chong 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: sd: Free scsi_disk device via put_device()

2021-10-09T11:25:59+00:00

[ Upstream commit 265dfe8ebbabae7959060bd1c3f75c2473b697ed ]

After a device is initialized via device_initialize() it should be freed
via put_device(). sd_probe() currently gets this wrong, fix it up.

Link: https://lore.kernel.org/r/20210906090112.531442-1-ming.lei@redhat.com
Reviewed-by: Bart Van Assche 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Ming Lei 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: iscsi: Adjust iface sysfs attr detection

2021-10-06T08:23:39+00:00

[ Upstream commit 4e28550829258f7dab97383acaa477bd724c0ff4 ]

ISCSI_NET_PARAM_IFACE_ENABLE belongs to enum iscsi_net_param instead of
iscsi_iface_param so move it to ISCSI_NET_PARAM. Otherwise, when we call
into the driver, we might not match and return that we don't want attr
visible in sysfs. Found in code review.

Link: https://lore.kernel.org/r/20210901085336.2264295-1-libaokun1@huawei.com
Fixes: e746f3451ec7 ("scsi: iscsi: Fix iface sysfs attr detection")
Reviewed-by: Lee Duncan 
Signed-off-by: Baokun Li 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: BusLogic: Fix missing pr_cont() use

2021-09-22T09:43:08+00:00

commit 44d01fc86d952f5a8b8b32bdb4841504d5833d95 upstream.

Update BusLogic driver's messaging system to use pr_cont() for continuation
lines, bringing messy output:

pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff 
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0:   Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level
scsi0:   PCI Bus: 0, Device: 19, Address:
0xE0012000,
Host Adapter SCSI ID: 7
scsi0:   Parity Checking: Enabled, Extended Translation: Enabled
scsi0:   Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0:   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0:   Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0:   Tagged Queue Depth:
Automatic
, Untagged Queue Depth: 3
scsi0:   SCSI Bus Termination: Both Enabled
, SCAM: Disabled

scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi host0: BusLogic BT-958

back to order:

pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff 
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0:   Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level
scsi0:   PCI Bus: 0, Device: 19, Address: 0xE0012000, Host Adapter SCSI ID: 7
scsi0:   Parity Checking: Enabled, Extended Translation: Enabled
scsi0:   Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0:   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0:   Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0:   Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
scsi0:   SCSI Bus Termination: Both Enabled, SCAM: Disabled
scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi host0: BusLogic BT-958

Also diagnostic output such as with the BusLogic=TraceConfiguration
parameter is affected and becomes vertical and therefore hard to read.
This has now been corrected, e.g.:

pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
blogic_cmd(86) Status = 30:  4 ==>  4: FF 05 93 00
blogic_cmd(95) Status = 28: (Modify I/O Address)
blogic_cmd(91) Status = 30:  1 ==>  1: 01
blogic_cmd(04) Status = 30:  4 ==>  4: 41 41 35 30
blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff 
blogic_cmd(04) Status = 30:  4 ==>  4: 41 41 35 30
blogic_cmd(0B) Status = 30:  3 ==>  3: 00 08 07
blogic_cmd(0D) Status = 30: 34 ==> 34: 03 01 07 04 00 00 00 00 00 00 00 00 00 00 00 00 FF 42 44 46 FF 00 00 00 00 00 00 00 00 00 FF 00 FF 00
blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D
blogic_cmd(84) Status = 30:  1 ==>  1: 37
blogic_cmd(8B) Status = 30:  5 ==>  5: 39 35 38 20 20
blogic_cmd(85) Status = 30:  1 ==>  1: 42
blogic_cmd(86) Status = 30:  4 ==>  4: FF 05 93 00
blogic_cmd(91) Status = 30: 64 ==> 64: 41 46 3E 20 39 35 38 20 20 00 C4 00 04 01 07 2F 07 04 35 FF FF FF FF FF FF FF FF FF FF 01 00 FE FF 08 FF FF 00 00 00 00 00 00 00 01 00 01 00 00 FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 FC
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter

etc.

Link: https://lore.kernel.org/r/alpine.DEB.2.21.2104201940430.44318@angie.orcam.me.uk
Fixes: 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines")
Cc: stable@vger.kernel.org # v4.9+
Acked-by: Khalid Aziz 
Signed-off-by: Maciej W. Rozycki 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: core: Avoid printing an error if target_alloc() returns -ENXIO

2021-08-26T12:37:26+00:00

[ Upstream commit 70edd2e6f652f67d854981fd67f9ad0f1deaea92 ]

Avoid printing a 'target allocation failed' error if the driver
target_alloc() callback function returns -ENXIO. This return value
indicates that the corresponding H:C:T:L entry is empty.

Removing this error reduces the scan time if the user issues SCAN_WILD_CARD
scan operation through sysfs parameter on a host with a lot of empty
H:C:T:L entries.

Avoiding the printk on -ENXIO matches the behavior of the other callback
functions during scanning.

Link: https://lore.kernel.org/r/20210726115402.1936-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: scsi_dh_rdac: Avoid crash during rdac_bus_attach()

2021-08-26T12:37:26+00:00

[ Upstream commit bc546c0c9abb3bb2fb46866b3d1e6ade9695a5f6 ]

The following BUG_ON() was observed during RDAC scan:

[595952.944297] kernel BUG at drivers/scsi/device_handler/scsi_dh_rdac.c:427!
[595952.951143] Internal error: Oops - BUG: 0 [#1] SMP
......
[595953.251065] Call trace:
[595953.259054]  check_ownership+0xb0/0x118
[595953.269794]  rdac_bus_attach+0x1f0/0x4b0
[595953.273787]  scsi_dh_handler_attach+0x3c/0xe8
[595953.278211]  scsi_dh_add_device+0xc4/0xe8
[595953.282291]  scsi_sysfs_add_sdev+0x8c/0x2a8
[595953.286544]  scsi_probe_and_add_lun+0x9fc/0xd00
[595953.291142]  __scsi_scan_target+0x598/0x630
[595953.295395]  scsi_scan_target+0x120/0x130
[595953.299481]  fc_user_scan+0x1a0/0x1c0 [scsi_transport_fc]
[595953.304944]  store_scan+0xb0/0x108
[595953.308420]  dev_attr_store+0x44/0x60
[595953.312160]  sysfs_kf_write+0x58/0x80
[595953.315893]  kernfs_fop_write+0xe8/0x1f0
[595953.319888]  __vfs_write+0x60/0x190
[595953.323448]  vfs_write+0xac/0x1c0
[595953.326836]  ksys_write+0x74/0xf0
[595953.330221]  __arm64_sys_write+0x24/0x30

Code is in check_ownership:

	list_for_each_entry_rcu(tmp, &h->ctlr->dh_list, node) {
		/* h->sdev should always be valid */
		BUG_ON(!tmp->sdev);
		tmp->sdev->access_state = access_state;
	}

	rdac_bus_attach
		initialize_controller
			list_add_rcu(&h->node, &h->ctlr->dh_list);
			h->sdev = sdev;

	rdac_bus_detach
		list_del_rcu(&h->node);
		h->sdev = NULL;

Fix the race between rdac_bus_attach() and rdac_bus_detach() where h->sdev
is NULL when processing the RDAC attach.

Link: https://lore.kernel.org/r/20210113063103.2698953-1-yebin10@huawei.com
Reviewed-by: Bart Van Assche 
Signed-off-by: Ye Bin 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: megaraid_mm: Fix end of loop tests for list_for_each_entry()

2021-08-26T12:37:26+00:00

[ Upstream commit 77541f78eadfe9fdb018a7b8b69f0f2af2cf4b82 ]

The list_for_each_entry() iterator, "adapter" in this code, can never be
NULL.  If we exit the loop without finding the correct adapter then
"adapter" points invalid memory that is an offset from the list head.  This
will eventually lead to memory corruption and presumably a kernel crash.

Link: https://lore.kernel.org/r/20210708074642.23599-1-harshvardhan.jha@oracle.com
Acked-by: Sumit Saxena 
Signed-off-by: Harshvardhan Jha 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: sr: Return correct event when media event code is 3

2021-08-15T11:01:01+00:00

[ Upstream commit 5c04243a56a7977185b00400e59ca7e108004faf ]

Media event code 3 is defined in the MMC-6 spec as follows:

  "MediaRemoval: The media has been removed from the specified slot, and
   the Drive is unable to access the media without user intervention. This
   applies to media changers only."

This indicated that treating the condition as an EJECT_REQUEST was
appropriate. However, doing so had the unfortunate side-effect of causing
the drive tray to be physically ejected on resume. Instead treat the event
as a MEDIA_CHANGE request.

Fixes: 7dd753ca59d6 ("scsi: sr: Return appropriate error code when disk is ejected")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213759
Link: https://lore.kernel.org/r/20210726114913.6760-1-limanyi@uniontech.com
Signed-off-by: Li Manyi 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: iscsi: Fix iface sysfs attr detection

2021-07-28T07:14:27+00:00

[ Upstream commit e746f3451ec7f91dcc9fd67a631239c715850a34 ]

A ISCSI_IFACE_PARAM can have the same value as a ISCSI_NET_PARAM so when
iscsi_iface_attr_is_visible tries to figure out the type by just checking
the value, we can collide and return the wrong type. When we call into the
driver we might not match and return that we don't want attr visible in
sysfs. The patch fixes this by setting the type when we figure out what the
param is.

Link: https://lore.kernel.org/r/20210701002559.89533-1-michael.christie@oracle.com
Fixes: 3e0f65b34cc9 ("[SCSI] iscsi_transport: Additional parameters for network settings")
Signed-off-by: Mike Christie 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin