linux-stable.git/drivers/scsi, branch v4.9.153

scsi: megaraid: fix out-of-bound array accesses

2019-01-26T08:38:35+00:00

[ Upstream commit c7a082e4242fd8cd21a441071e622f87c16bdacc ]

UBSAN reported those with MegaRAID SAS-3 3108,

[   77.467308] UBSAN: Undefined behaviour in drivers/scsi/megaraid/megaraid_sas_fp.c:117:32
[   77.475402] index 255 is out of range for type 'MR_LD_SPAN_MAP [1]'
[   77.481677] CPU: 16 PID: 333 Comm: kworker/16:1 Not tainted 4.20.0-rc5+ #1
[   77.488556] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.50 06/01/2018
[   77.495791] Workqueue: events work_for_cpu_fn
[   77.500154] Call trace:
[   77.502610]  dump_backtrace+0x0/0x2c8
[   77.506279]  show_stack+0x24/0x30
[   77.509604]  dump_stack+0x118/0x19c
[   77.513098]  ubsan_epilogue+0x14/0x60
[   77.516765]  __ubsan_handle_out_of_bounds+0xfc/0x13c
[   77.521767]  mr_update_load_balance_params+0x150/0x158 [megaraid_sas]
[   77.528230]  MR_ValidateMapInfo+0x2cc/0x10d0 [megaraid_sas]
[   77.533825]  megasas_get_map_info+0x244/0x2f0 [megaraid_sas]
[   77.539505]  megasas_init_adapter_fusion+0x9b0/0xf48 [megaraid_sas]
[   77.545794]  megasas_init_fw+0x1ab4/0x3518 [megaraid_sas]
[   77.551212]  megasas_probe_one+0x2c4/0xbe0 [megaraid_sas]
[   77.556614]  local_pci_probe+0x7c/0xf0
[   77.560365]  work_for_cpu_fn+0x34/0x50
[   77.564118]  process_one_work+0x61c/0xf08
[   77.568129]  worker_thread+0x534/0xa70
[   77.571882]  kthread+0x1c8/0x1d0
[   77.575114]  ret_from_fork+0x10/0x1c

[   89.240332] UBSAN: Undefined behaviour in drivers/scsi/megaraid/megaraid_sas_fp.c:117:32
[   89.248426] index 255 is out of range for type 'MR_LD_SPAN_MAP [1]'
[   89.254700] CPU: 16 PID: 95 Comm: kworker/u130:0 Not tainted 4.20.0-rc5+ #1
[   89.261665] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.50 06/01/2018
[   89.268903] Workqueue: events_unbound async_run_entry_fn
[   89.274222] Call trace:
[   89.276680]  dump_backtrace+0x0/0x2c8
[   89.280348]  show_stack+0x24/0x30
[   89.283671]  dump_stack+0x118/0x19c
[   89.287167]  ubsan_epilogue+0x14/0x60
[   89.290835]  __ubsan_handle_out_of_bounds+0xfc/0x13c
[   89.295828]  MR_LdRaidGet+0x50/0x58 [megaraid_sas]
[   89.300638]  megasas_build_io_fusion+0xbb8/0xd90 [megaraid_sas]
[   89.306576]  megasas_build_and_issue_cmd_fusion+0x138/0x460 [megaraid_sas]
[   89.313468]  megasas_queue_command+0x398/0x3d0 [megaraid_sas]
[   89.319222]  scsi_dispatch_cmd+0x1dc/0x8a8
[   89.323321]  scsi_request_fn+0x8e8/0xdd0
[   89.327249]  __blk_run_queue+0xc4/0x158
[   89.331090]  blk_execute_rq_nowait+0xf4/0x158
[   89.335449]  blk_execute_rq+0xdc/0x158
[   89.339202]  __scsi_execute+0x130/0x258
[   89.343041]  scsi_probe_and_add_lun+0x2fc/0x1488
[   89.347661]  __scsi_scan_target+0x1cc/0x8c8
[   89.351848]  scsi_scan_channel.part.3+0x8c/0xc0
[   89.356382]  scsi_scan_host_selected+0x130/0x1f0
[   89.361002]  do_scsi_scan_host+0xd8/0xf0
[   89.364927]  do_scan_async+0x9c/0x320
[   89.368594]  async_run_entry_fn+0x138/0x420
[   89.372780]  process_one_work+0x61c/0xf08
[   89.376793]  worker_thread+0x13c/0xa70
[   89.380546]  kthread+0x1c8/0x1d0
[   89.383778]  ret_from_fork+0x10/0x1c

This is because when populating Driver Map using firmware raid map, all
non-existing VDs set their ldTgtIdToLd to 0xff, so it can be skipped later.

From drivers/scsi/megaraid/megaraid_sas_base.c ,
memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS);

From drivers/scsi/megaraid/megaraid_sas_fp.c ,
/* For non existing VDs, iterate to next VD*/
if (ld >= (MAX_LOGICAL_DRIVES_EXT - 1))
	continue;

However, there are a few places that failed to skip those non-existing VDs
due to off-by-one errors. Then, those 0xff leaked into MR_LdRaidGet(0xff,
map) and triggered the out-of-bound accesses.

Fixes: 51087a8617fe ("megaraid_sas : Extended VD support")
Signed-off-by: Qian Cai 
Acked-by: Sumit Saxena 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: smartpqi: correct lun reset issues

2019-01-26T08:38:35+00:00

[ Upstream commit 2ba55c9851d74eb015a554ef69ddf2ef061d5780 ]

Problem:
The Linux kernel takes a logical volume offline after a LUN reset.  This is
generally accompanied by this message in the dmesg output:

Device offlined - not ready after error recovery

Root Cause:
The root cause is a "quirk" in the timeout handling in the Linux SCSI
layer. The Linux kernel places a 30-second timeout on most media access
commands (reads and writes) that it send to device drivers.  When a media
access command times out, the Linux kernel goes into error recovery mode
for the LUN that was the target of the command that timed out. Every
command that timed out is kept on a list inside of the Linux kernel to be
retried later. The kernel attempts to recover the command(s) that timed out
by issuing a LUN reset followed by a TEST UNIT READY. If the LUN reset and
TEST UNIT READY commands are successful, the kernel retries the command(s)
that timed out.

Each SCSI command issued by the kernel has a result field associated with
it. This field indicates the final result of the command (success or
error). When a command times out, the kernel places a value in this result
field indicating that the command timed out.

The "quirk" is that after the LUN reset and TEST UNIT READY commands are
completed, the kernel checks each command on the timed-out command list
before retrying it. If the result field is still "timed out", the kernel
treats that command as not having been successfully recovered for a
retry. If the number of commands that are in this state are greater than
two, the kernel takes the LUN offline.

Fix:
When our RAIDStack receives a LUN reset, it simply waits until all
outstanding commands complete. Generally, all of these outstanding commands
complete successfully. Therefore, the fix in the smartpqi driver is to
always set the command result field to indicate success when a request
completes successfully. This normally isn’t necessary because the result
field is always initialized to success when the command is submitted to the
driver. So when the command completes successfully, the result field is
left untouched. But in this case, the kernel changes the result field
behind the driver’s back and then expects the field to be changed by the
driver as the commands that timed-out complete.

Reviewed-by: Dave Carroll 
Reviewed-by: Scott Teel 
Signed-off-by: Kevin Barnett 
Signed-off-by: Don Brace 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: sd: Fix cache_type_store()

2019-01-23T07:10:54+00:00

commit 44759979a49bfd2d20d789add7fa81a21eb1a4ab upstream.

Changing of caching mode via /sys/devices/.../scsi_disk/.../cache_type may
fail if device responds to MODE SENSE command with DPOFUA flag set, and
then checks this flag to be not set on MODE SELECT command.

In this scenario, when trying to change cache_type, write always fails:

	# echo "none" >cache_type
	bash: echo: write error: Invalid argument

And following appears in dmesg:

	[13007.865745] sd 1:0:1:0: [sda] Sense Key : Illegal Request [current]
	[13007.865753] sd 1:0:1:0: [sda] Add. Sense: Invalid field in parameter list

From SBC-4 r15, 6.5.1 "Mode pages overview", description of DEVICE-SPECIFIC
PARAMETER field in the mode parameter header:
	...
	The write protect (WP) bit for mode data sent with a MODE SELECT
	command shall be ignored by the device server.
	...
	The DPOFUA bit is reserved for mode data sent with a MODE SELECT
	command.
	...

The remaining bits in the DEVICE-SPECIFIC PARAMETER byte are also reserved
and shall be set to zero.

[mkp: shuffled commentary to commit description]

Cc: stable@vger.kernel.org
Signed-off-by: Ivan Mironov 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: core: Synchronize request queue PM status only on successful resume

2019-01-23T07:10:54+00:00

commit 3f7e62bba0003f9c68f599f5997c4647ef5b4f4e upstream.

The commit 356fd2663cff ("scsi: Set request queue runtime PM status back to
active on resume") fixed up the inconsistent RPM status between request
queue and device. However changing request queue RPM status shall be done
only on successful resume, otherwise status may be still inconsistent as
below,

Request queue: RPM_ACTIVE
Device: RPM_SUSPENDED

This ends up soft lockup because requests can be submitted to underlying
devices but those devices and their required resource are not resumed.

For example,

After above inconsistent status happens, IO request can be submitted to UFS
device driver but required resource (like clock) is not resumed yet thus
lead to warning as below call stack,

WARN_ON(hba->clk_gating.state != CLKS_ON);
ufshcd_queuecommand
scsi_dispatch_cmd
scsi_request_fn
__blk_run_queue
cfq_insert_request
__elv_add_request
blk_flush_plug_list
blk_finish_plug
jbd2_journal_commit_transaction
kjournald2

We may see all behind IO requests hang because of no response from storage
host or device and then soft lockup happens in system. In the end, system
may crash in many ways.

Fixes: 356fd2663cff (scsi: Set request queue runtime PM status back to active on resume)
Cc: stable@vger.kernel.org
Signed-off-by: Stanley Chu 
Reviewed-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: bnx2fc: Fix NULL dereference in error handling

2019-01-13T09:03:48+00:00

[ Upstream commit 9ae4f8420ed7be4b13c96600e3568c144d101a23 ]

If "interface" is NULL then we can't release it and trying to will only
lead to an Oops.

Fixes: aea71a024914 ("[SCSI] bnx2fc: Introduce interface structure for each vlan interface")
Signed-off-by: Dan Carpenter 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: vmw_pscsi: Rearrange code to avoid multiple calls to free_irq during unload

2018-12-21T13:11:35+00:00

[ Upstream commit 02f425f811cefcc4d325d7a72272651e622dc97e ]

Currently pvscsi_remove calls free_irq more than once as
pvscsi_release_resources and __pvscsi_shutdown both call
pvscsi_shutdown_intr. This results in a 'Trying to free already-free IRQ'
warning and stack trace. To solve the problem pvscsi_shutdown_intr has been
moved out of pvscsi_release_resources.

Signed-off-by: Cathy Avery 
Reviewed-by: Ewan D. Milne 
Reviewed-by: Dan Carpenter 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: libiscsi: Fix NULL pointer dereference in iscsi_eh_session_reset

2018-12-21T13:11:35+00:00

[ Upstream commit 5db6dd14b31397e8cccaaddab2ff44ebec1acf25 ]

This commit addresses NULL pointer dereference in iscsi_eh_session_reset.
Reference should not be made to session->leadconn when session->state is
set to ISCSI_STATE_TERMINATE.

Signed-off-by: Fred Herard 
Reviewed-by: Konrad Rzeszutek Wilk 
Reviewed-by: Lee Duncan 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

sr: pass down correctly sized SCSI sense buffer

2018-12-13T08:20:29+00:00

commit f7068114d45ec55996b9040e98111afa56e010fe upstream.

We're casting the CDROM layer request_sense to the SCSI sense
buffer, but the former is 64 bytes and the latter is 96 bytes.
As we generally allocate these on the stack, we end up blowing
up the stack.

Fix this by wrapping the scsi_execute() call with a properly
sized sense buffer, and copying back the bits for the CDROM
layer.

Reported-by: Piotr Gabriel Kosinski 
Reported-by: Daniel Shapira 
Tested-by: Kees Cook 
Fixes: 82ed4db499b8 ("block: split scsi_request out of struct request")
Signed-off-by: Jens Axboe 
[bwh: Despite what the "Fixes" field says, a buffer overrun was already
 possible if the sense data was really > 64 bytes long.
 Backported to 4.9:
 - We always need to allocate a sense buffer in order to call
   scsi_normalize_sense()
 - Remove the existing conditional heap-allocation of the sense buffer]
Signed-off-by: Ben Hutchings 
Signed-off-by: Sasha Levin

scsi: csiostor: Avoid content leaks and casts

2018-12-08T12:05:06+00:00

commit 42c335f7e67029d2e01711f2f2bc6252277c8993 upstream.

When copying attributes, the len argument was padded out and the
resulting memcpy() would copy beyond the end of the source buffer.
Avoid this, and use size_t for val_len to avoid all the casts.
Similarly, avoid source buffer casts and use void *.

Additionally enforces val_len can be represented by u16 and that the DMA
buffer was not overflowed. Fixes the size of mfa, which is not
FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN (but it will be padded up to 4). This
was noticed by the future CONFIG_FORTIFY_SOURCE checks.

Cc: Daniel Micay 
Signed-off-by: Kees Cook 
Acked-by: Varun Prakash 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: scsi_devinfo: cleanly zero-pad devinfo strings

2018-12-08T12:05:06+00:00

commit 81df022b688d43d2a3667518b2f755d384397910 upstream.

Cleanly fill memory for "vendor" and "model" with 0-bytes for the
"compatible" case rather than adding only a single 0 byte.  This
simplifies the devinfo code a a bit, and avoids mistakes in other places
of the code (not in current upstream, but we had one such mistake in the
SUSE kernel).

[mkp: applied by hand and added braces]

Signed-off-by: Martin Wilck 
Reviewed-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman