linux-stable.git/drivers/scsi, branch v4.6.2

aacraid: Fix for KDUMP driver hang

2016-06-08T01:23:37+00:00

commit 78cbccd3bd683c295a44af8050797dc4a41376ff upstream.

When KDUMP is triggered the driver first talks to the firmware in INTX
mode, but the adapter firmware is still in MSIX mode. Therefore the first
driver command hangs since the driver is waiting for an INTX response and
firmware gives a MSIX response. If when the OS is installed on a RAID
drive created by the adapter KDUMP will hang since the driver does not
receive a response in sync mode.

Fixed by: Change the firmware to INTX mode if it is in MSIX mode before
sending the first sync command.

Signed-off-by: Raghava Aditya Renukunta 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

aacraid: Fix for aac_command_thread hang

2016-06-08T01:23:37+00:00

commit fc4bf75ea300a5e62a2419f89dd0e22189dd7ab7 upstream.

Typically under error conditions, it is possible for aac_command_thread()
to miss the wakeup from kthread_stop() and go back to sleep, causing it
to hang aac_shutdown.

In the observed scenario, the adapter is not functioning correctly and so
aac_fib_send() never completes (or time-outs depending on how it was
called). Shortly after aac_command_thread() starts it performs
aac_fib_send(SendHostTime) which hangs. When aac_probe_one
/aac_get_adapter_info send time outs, kthread_stop is called which breaks
the command thread out of it's hang.

The code will still go back to sleep in schedule_timeout() without
checking kthread_should_stop() so it causes aac_probe_one to hang until
the schedule_timeout() which is 30 minutes.

Fixed by: Adding another kthread_should_stop() before schedule_timeout()
Signed-off-by: Raghava Aditya Renukunta 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

aacraid: Relinquish CPU during timeout wait

2016-06-08T01:23:37+00:00

commit 07beca2be24cc710461c0b131832524c9ee08910 upstream.

aac_fib_send has a special function case for initial commands during
driver initialization using wait < 0(pseudo sync mode). In this case,
the command does not sleep but rather spins checking for timeout.This
loop is calls cpu_relax() in an attempt to allow other processes/threads
to use the CPU, but this function does not relinquish the CPU and so the
command will hog the processor. This was observed in a KDUMP
"crashkernel" and that prevented the "command thread" (which is
responsible for completing the command from being timed out) from
starting because it could not get the CPU.

Fixed by replacing "cpu_relax()" call with "schedule()"
Signed-off-by: Raghava Aditya Renukunta 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

aacraid: Start adapter after updating number of MSIX vectors

2016-06-08T01:23:37+00:00

commit 116d77fea02e2a5aded7d29ba4c692774cb339f1 upstream.

The adapter has to be started after updating the number of MSIX Vectors

Fixes: ecc479e00db8 (aacraid: Set correct MSIX count for EEH recovery)
Signed-off-by: Raghava Aditya Renukunta 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

Revert "lpfc: Delete unnecessary checks before the function call mempool_destroy"

2016-06-08T01:23:37+00:00

commit d65c8fff867a6450c58ce31572e883148a445ddf upstream.

This reverts commit 9be321819c43417432a8376428b90fe3fe3a3510 which
caused a regression on hardware using the SLI3 interface.

Reported-by: Dick Kennedy 
Signed-off-by: Martin K. Petersen 
Signed-off-by: James Bottomley 
Signed-off-by: Greg Kroah-Hartman

Revert "scsi: fix soft lockup in scsi_remove_target() on module removal"

2016-06-01T19:18:05+00:00

commit 305c2e71b3d733ec065cb716c76af7d554bd5571 upstream.

Now that we've done a more comprehensive fix with the intermediate
target state we can remove the previous hack introduced with commit
90a88d6ef88e ("scsi: fix soft lockup in scsi_remove_target() on module
removal").

Signed-off-by: Johannes Thumshirn 
Reviewed-by: Ewan D. Milne 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: Add intermediate STARGET_REMOVE state to scsi_target_state

2016-06-01T19:18:05+00:00

commit f05795d3d771f30a7bdc3a138bf714b06d42aa95 upstream.

Add intermediate STARGET_REMOVE state to scsi_target_state to avoid
running into the BUG_ON() in scsi_target_reap(). The STARGET_REMOVE
state is only valid in the path from scsi_remove_target() to
scsi_target_destroy() indicating this target is going to be removed.

This re-fixes the problem introduced in commits bc3f02a795d3 ("[SCSI]
scsi_remove_target: fix softlockup regression on hot remove") and
40998193560d ("scsi: restart list search after unlock in
scsi_remove_target") in a more comprehensive way.

[mkp: Included James' fix for scsi_target_destroy()]

Signed-off-by: Johannes Thumshirn 
Fixes: 40998193560dab6c3ce8d25f4fa58a23e252ef38
Reported-by: Sergey Senozhatsky 
Tested-by: Sergey Senozhatsky 
Reviewed-by: Ewan D. Milne 
Reviewed-by: Hannes Reinecke 
Reviewed-by: James Bottomley 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2016-05-11T20:17:12+00:00

Pull SCSI fixes from James Bottomley:
 "This is a couple of small fixes: one is a potential uninitialised
  error variable in the alua code, potentially causing spurious failures
  and the other is a problem caused by the conversion of SCSI to
  hostwide tags which resulted in the qla1280 driver always failing in
  host initialisation"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  qla1280: Don't allocate 512kb of host tags
  scsi_dh_alua: uninitialized variable in alua_rtpg()

qla1280: Don't allocate 512kb of host tags

2016-04-30T16:25:26+00:00

The qla1280 driver sets the scsi_host_template's can_queue field to 0xfffff
which results in an allocation failure when allocating the block layer tags
for the driver's queues. This was introduced with the change for host wide
tags in commit 64d513ac31b - "scsi: use host wide tags by default".

Reduce can_queue to MAX_OUTSTANDING_COMMANDS (512) to solve the allocation
error.

Signed-off-by: Johannes Thumshirn 
Fixes: 64d513ac31b - "scsi: use host wide tags by default"
Cc: stable@vger.kernel.org # v4.4
Cc: Laura Abbott 
Cc: Michael Reed 
Reviewed-by: Laurence Oberman 
Reviewed-by: Lee Duncan 
Signed-off-by: Martin K. Petersen 
Signed-off-by: James Bottomley

scsi_dh_alua: uninitialized variable in alua_rtpg()

2016-04-30T16:24:50+00:00

It's possible to use "err" without initializing it.  If it happens to be
a 2 which is SCSI_DH_RETRY then that could cause a bug.  Bart Van Assche
pointed out that we should probably re-initialize it for every iteration
through the retry loop.

Signed-off-by: Dan Carpenter 
Reviewed-by: Hannes Reinicke 
Signed-off-by: Martin K. Petersen 
Signed-off-by: James Bottomley