linux-stable.git/drivers/scsi, branch v4.4.263

scsi: lpfc: Fix some error codes in debugfs

2021-03-24T09:57:00+00:00

commit 19f1bc7edf0f97186810e13a88f5b62069d89097 upstream.

If copy_from_user() or kstrtoull() fail then the correct behavior is to
return a negative error code.

Link: https://lore.kernel.org/r/YEsbU/UxYypVrC7/@mwanda
Fixes: f9bb2da11db8 ("[SCSI] lpfc 8.3.27: T10 additions for SLI4")
Signed-off-by: Dan Carpenter 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: libiscsi: Fix iscsi_prep_scsi_cmd_pdu() error handling

2021-03-17T15:07:20+00:00

[ Upstream commit d28d48c699779973ab9a3bd0e5acfa112bd4fdef ]

If iscsi_prep_scsi_cmd_pdu() fails we try to add it back to the cmdqueue,
but we leave it partially setup. We don't have functions that can undo the
pdu and init task setup. We only have cleanup_task which can clean up both
parts. So this has us just fail the cmd and go through the standard cleanup
routine and then have the SCSI midlayer retry it like is done when it fails
in the queuecommand path.

Link: https://lore.kernel.org/r/20210207044608.27585-2-michael.christie@oracle.com
Reviewed-by: Lee Duncan 
Signed-off-by: Mike Christie 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: iscsi: Verify lengths on passthrough PDUs

2021-03-07T10:24:22+00:00

commit f9dbdf97a5bd92b1a49cee3d591b55b11fd7a6d5 upstream.

Open-iSCSI sends passthrough PDUs over netlink, but the kernel should be
verifying that the provided PDU header and data lengths fall within the
netlink message to prevent accessing beyond that in memory.

Cc: stable@vger.kernel.org
Reported-by: Adam Nichols 
Reviewed-by: Lee Duncan 
Reviewed-by: Mike Christie 
Signed-off-by: Chris Leech 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: iscsi: Ensure sysfs attributes are limited to PAGE_SIZE

2021-03-07T10:24:22+00:00

commit ec98ea7070e94cc25a422ec97d1421e28d97b7ee upstream.

As the iSCSI parameters are exported back through sysfs, it should be
enforcing that they never are more than PAGE_SIZE (which should be more
than enough) before accepting updates through netlink.

Change all iSCSI sysfs attributes to use sysfs_emit().

Cc: stable@vger.kernel.org
Reported-by: Adam Nichols 
Reviewed-by: Lee Duncan 
Reviewed-by: Greg Kroah-Hartman 
Reviewed-by: Mike Christie 
Signed-off-by: Chris Leech 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: iscsi: Restrict sessions and handles to admin capabilities

2021-03-07T10:24:21+00:00

commit 688e8128b7a92df982709a4137ea4588d16f24aa upstream.

Protect the iSCSI transport handle, available in sysfs, by requiring
CAP_SYS_ADMIN to read it. Also protect the netlink socket by restricting
reception of messages to ones sent with CAP_SYS_ADMIN. This disables
normal users from being able to end arbitrary iSCSI sessions.

Cc: stable@vger.kernel.org
Reported-by: Adam Nichols 
Reviewed-by: Chris Leech 
Reviewed-by: Mike Christie 
Signed-off-by: Lee Duncan 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

block: Move SECTOR_SIZE and SECTOR_SHIFT definitions into

2021-03-03T15:44:21+00:00

commit 233bde21aa43516baa013ef7ac33f3427056db3e upstream.

It happens often while I'm preparing a patch for a block driver that
I'm wondering: is a definition of SECTOR_SIZE and/or SECTOR_SHIFT
available for this driver? Do I have to introduce definitions of these
constants before I can use these constants? To avoid this confusion,
move the existing definitions of SECTOR_SIZE and SECTOR_SHIFT into the
 header file such that these become available for all
block drivers. Make the SECTOR_SIZE definition in the uapi msdos_fs.h
header file conditional to avoid that including that header file after
 causes the compiler to complain about a SECTOR_SIZE
redefinition.

Note: the SECTOR_SIZE / SECTOR_SHIFT / SECTOR_BITS definitions have
not been removed from uapi header files nor from NAND drivers in
which these constants are used for another purpose than converting
block layer offsets and sizes into a number of sectors.

Cc: David S. Miller 
Cc: Mike Snitzer 
Cc: Dan Williams 
Cc: Minchan Kim 
Cc: Nitin Gupta 
Reviewed-by: Sergey Senozhatsky 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Johannes Thumshirn 
Reviewed-by: Martin K. Petersen 
Signed-off-by: Bart Van Assche 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

scsi: bnx2fc: Fix Kconfig warning & CNIC build errors

2021-03-03T15:44:20+00:00

[ Upstream commit eefb816acb0162e94a85a857f3a55148f671d5a5 ]

CNIC depends on MMU, but since 'select' does not follow any dependency
chains, SCSI_BNX2X_FCOE also needs to depend on MMU, so that erroneous
configs are not generated, which cause build errors in cnic.

WARNING: unmet direct dependencies detected for CNIC
  Depends on [n]: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && PCI [=y] && (IPV6 [=n] || IPV6 [=n]=n) && MMU [=n]
  Selected by [y]:
  - SCSI_BNX2X_FCOE [=y] && SCSI_LOWLEVEL [=y] && SCSI [=y] && PCI [=y] && (IPV6 [=n] || IPV6 [=n]=n) && LIBFC [=y] && LIBFCOE [=y]

riscv64-linux-ld: drivers/net/ethernet/broadcom/cnic.o: in function `.L154':
cnic.c:(.text+0x1094): undefined reference to `uio_event_notify'
riscv64-linux-ld: cnic.c:(.text+0x10bc): undefined reference to `uio_event_notify'
riscv64-linux-ld: drivers/net/ethernet/broadcom/cnic.o: in function `.L1442':
cnic.c:(.text+0x96a8): undefined reference to `__uio_register_device'
riscv64-linux-ld: drivers/net/ethernet/broadcom/cnic.o: in function `.L0 ':
cnic.c:(.text.unlikely+0x68): undefined reference to `uio_unregister_device'

Link: https://lore.kernel.org/r/20210213192428.22537-1-rdunlap@infradead.org
Fixes: 853e2bd2103a ("[SCSI] bnx2fc: Broadcom FCoE offload driver")
Cc: Saurav Kashyap 
Cc: Javed Hasan 
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: "James E.J. Bottomley" 
Cc: "Martin K. Petersen" 
Cc: linux-scsi@vger.kernel.org
Reported-by: kernel test robot 
Signed-off-by: Randy Dunlap 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: qla2xxx: Fix crash during driver load on big endian machines

2021-02-23T12:58:14+00:00

commit 8de309e7299a00b3045fb274f82b326f356404f0 upstream

Crash stack:
	[576544.715489] Unable to handle kernel paging request for data at address 0xd00000000f970000
	[576544.715497] Faulting instruction address: 0xd00000000f880f64
	[576544.715503] Oops: Kernel access of bad area, sig: 11 [#1]
	[576544.715506] SMP NR_CPUS=2048 NUMA pSeries
	:
	[576544.715703] NIP [d00000000f880f64] .qla27xx_fwdt_template_valid+0x94/0x100 [qla2xxx]
	[576544.715722] LR [d00000000f7952dc] .qla24xx_load_risc_flash+0x2fc/0x590 [qla2xxx]
	[576544.715726] Call Trace:
	[576544.715731] [c0000004d0ffb000] [c0000006fe02c350] 0xc0000006fe02c350 (unreliable)
	[576544.715750] [c0000004d0ffb080] [d00000000f7952dc] .qla24xx_load_risc_flash+0x2fc/0x590 [qla2xxx]
	[576544.715770] [c0000004d0ffb170] [d00000000f7aa034] .qla81xx_load_risc+0x84/0x1a0 [qla2xxx]
	[576544.715789] [c0000004d0ffb210] [d00000000f79f7c8] .qla2x00_setup_chip+0xc8/0x910 [qla2xxx]
	[576544.715808] [c0000004d0ffb300] [d00000000f7a631c] .qla2x00_initialize_adapter+0x4dc/0xb00 [qla2xxx]
	[576544.715826] [c0000004d0ffb3e0] [d00000000f78ce28] .qla2x00_probe_one+0xf08/0x2200 [qla2xxx]

Link: https://lore.kernel.org/r/20201202132312.19966-8-njavali@marvell.com
Fixes: f73cb695d3ec ("[SCSI] qla2xxx: Add support for ISP2071.")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani 
Signed-off-by: Arun Easi 
Signed-off-by: Nilesh Javali 
Signed-off-by: Martin K. Petersen 
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee 
Signed-off-by: Greg Kroah-Hartman

scsi: ibmvfc: Set default timeout to avoid crash during migration

2021-02-10T08:07:26+00:00

[ Upstream commit 764907293edc1af7ac857389af9dc858944f53dc ]

While testing live partition mobility, we have observed occasional crashes
of the Linux partition. What we've seen is that during the live migration,
for specific configurations with large amounts of memory, slow network
links, and workloads that are changing memory a lot, the partition can end
up being suspended for 30 seconds or longer. This resulted in the following
scenario:

CPU 0                          CPU 1
-------------------------------  ----------------------------------
scsi_queue_rq                    migration_store
 -> blk_mq_start_request          -> rtas_ibm_suspend_me
  -> blk_add_timer                 -> on_each_cpu(rtas_percpu_suspend_me
              _______________________________________V
             |
             V
    -> IPI from CPU 1
     -> rtas_percpu_suspend_me
                                     -> __rtas_suspend_last_cpu

-- Linux partition suspended for > 30 seconds --
                                      -> for_each_online_cpu(cpu)
                                           plpar_hcall_norets(H_PROD
 -> scsi_dispatch_cmd
                                      -> scsi_times_out
                                       -> scsi_abort_command
                                        -> queue_delayed_work
  -> ibmvfc_queuecommand_lck
   -> ibmvfc_send_event
    -> ibmvfc_send_crq
     - returns H_CLOSED
   <- returns SCSI_MLQUEUE_HOST_BUSY
-> __blk_mq_requeue_request

                                      -> scmd_eh_abort_handler
                                       -> scsi_try_to_abort_cmd
                                         - returns SUCCESS
                                       -> scsi_queue_insert

Normally, the SCMD_STATE_COMPLETE bit would protect against the command
completion and the timeout, but that doesn't work here, since we don't
check that at all in the SCSI_MLQUEUE_HOST_BUSY path.

In this case we end up calling scsi_queue_insert on a request that has
already been queued, or possibly even freed, and we crash.

The patch below simply increases the default I/O timeout to avoid this race
condition. This is also the timeout value that nearly all IBM SAN storage
recommends setting as the default value.

Link: https://lore.kernel.org/r/1610463998-19791-1-git-send-email-brking@linux.vnet.ibm.com
Signed-off-by: Brian King 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: libfc: Avoid invoking response handler twice if ep is already completed

2021-02-10T08:07:26+00:00

[ Upstream commit b2b0f16fa65e910a3ec8771206bb49ee87a54ac5 ]

A race condition exists between the response handler getting called because
of exchange_mgr_reset() (which clears out all the active XIDs) and the
response we get via an interrupt.

Sequence of events:

	 rport ba0200: Port timeout, state PLOGI
	 rport ba0200: Port entered PLOGI state from PLOGI state
	 xid 1052: Exchange timer armed : 20000 msecs      xid timer armed here
	 rport ba0200: Received LOGO request while in state PLOGI
	 rport ba0200: Delete port
	 rport ba0200: work event 3
	 rport ba0200: lld callback ev 3
	 bnx2fc: rport_event_hdlr: event = 3, port_id = 0xba0200
	 bnx2fc: ba0200 - rport not created Yet!!
	 /* Here we reset any outstanding exchanges before
	 freeing rport using the exch_mgr_reset() */
	 xid 1052: Exchange timer canceled
	 /* Here we got two responses for one xid */
	 xid 1052: invoking resp(), esb 20000000 state 3
	 xid 1052: invoking resp(), esb 20000000 state 3
	 xid 1052: fc_rport_plogi_resp() : ep->resp_active 2
	 xid 1052: fc_rport_plogi_resp() : ep->resp_active 2

Skip the response if the exchange is already completed.

Link: https://lore.kernel.org/r/20201215194731.2326-1-jhasan@marvell.com
Signed-off-by: Javed Hasan 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin