linux-stable.git/drivers/scsi, branch v4.4.205

scsi: lpfc: fcoe: Fix link down issue after 1000+ link bounces

2019-11-28T17:26:06+00:00

[ Upstream commit 036cad1f1ac9ce03e2db94b8460f98eaf1e1ee4c ]

On FCoE adapters, when running link bounce test in a loop, initiator
failed to login with switch switch and required driver reload to
recover. Switch reached a point where all subsequent FLOGIs would be
LS_RJT'd. Further testing showed the condition to be related to not
performing FCF discovery between FLOGI's.

Fix by monitoring FLOGI failures and once a repeated error is seen
repeat FCF discovery.

Signed-off-by: Dick Kennedy 
Signed-off-by: James Smart 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: megaraid_sas: Fix msleep granularity

2019-11-28T17:26:05+00:00

[ Upstream commit 9155cf30a3c4ef97e225d6daddf9bd4b173267e8 ]

In megasas_transition_to_ready() driver waits 180seconds for controller to
change FW state. Here we are calling msleep(1) in a loop for this.  As
explained in timers-howto.txt, msleep(1) will actually sleep longer than
1ms. If a faulty controller is connected, we will end up waiting for much
more than 180 seconds causing unnecessary delays during load.

Change the granularity of msleep() call from 1ms to 1000ms.

Signed-off-by: Shivasharan S 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: mpt3sas: Fix driver modifying persistent data in Manufacturing page11

2019-11-28T17:26:05+00:00

[ Upstream commit 97f35194093362a63b33caba2485521ddabe2c95 ]

Currently driver is modifying both current & NVRAM/persistent data in
Manufacturing page11. Driver should change only current copy of
Manufacturing page11. It should not modify the persistent data.

So removed the section of code where driver is modifying the persistent
data of Manufacturing page11.

Signed-off-by: Suganath Prabu 
Reviewed-by: Bjorn Helgaas 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: mpt3sas: Fix Sync cache command failure during driver unload

2019-11-28T17:26:04+00:00

[ Upstream commit 9029a72500b95578a35877a43473b82cb0386c53 ]

This is to fix SYNC CACHE and START STOP command failures with
DID_NO_CONNECT during driver unload.

In driver's IO submission patch (i.e. in driver's .queuecommand()) driver
won't allow any SCSI commands to the IOC when ioc->remove_host flag is set
and hence SYNC CACHE commands which are issued to the target drives (where
write cache is enabled) during driver unload time is failed with
DID_NO_CONNECT status.

Now modified the driver to allow SYNC CACHE and START STOP commands to IOC,
even when remove_host flag is set.

Signed-off-by: Suganath Prabu 
Reviewed-by: Bjorn Helgaas 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: dc395x: fix DMA API usage in sg_update_list

2019-11-28T17:25:43+00:00

[ Upstream commit 6c404a68bf83b4135a8a9aa1c388ebdf98e8ba7f ]

We need to transfer device ownership to the CPU before we can manipulate
the mapped data.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: dc395x: fix dma API usage in srb_done

2019-11-28T17:25:42+00:00

[ Upstream commit 3a5bd7021184dec2946f2a4d7a8943f8a5713e52 ]

We can't just transfer ownership to the CPU and then unmap, as this will
break with swiotlb.

Instead unmap the command and sense buffer a little earlier in the I/O
completion handler and get rid of the pci_dma_sync_sg_for_cpu call
entirely.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: iscsi_tcp: Explicitly cast param in iscsi_sw_tcp_host_get_param

2019-11-28T17:25:41+00:00

[ Upstream commit 20054597f169090109fc3f0dfa1a48583f4178a4 ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/scsi/iscsi_tcp.c:803:15: warning: implicit conversion from
enumeration type 'enum iscsi_host_param' to different enumeration type
'enum iscsi_param' [-Wenum-conversion]
                                                 &addr, param, buf);
                                                        ^~~~~
1 warning generated.

iscsi_conn_get_addr_param handles ISCSI_HOST_PARAM_IPADDRESS just fine
so add an explicit cast to iscsi_param to make it clear to Clang that
this is expected behavior.

Link: https://github.com/ClangBuiltLinux/linux/issues/153
Signed-off-by: Nathan Chancellor 
Reviewed-by: Nick Desaulniers 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: isci: Change sci_controller_start_task's return type to sci_status

2019-11-28T17:25:41+00:00

[ Upstream commit 362b5da3dfceada6e74ecdd7af3991bbe42c0c0f ]

Clang warns when an enumerated type is implicitly converted to another.

drivers/scsi/isci/request.c:3476:13: warning: implicit conversion from
enumeration type 'enum sci_task_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
                        status = sci_controller_start_task(ihost,
                               ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/isci/host.c:2744:10: warning: implicit conversion from
enumeration type 'enum sci_status' to different enumeration type 'enum
sci_task_status' [-Wenum-conversion]
                return SCI_SUCCESS;
                ~~~~~~ ^~~~~~~~~~~
drivers/scsi/isci/host.c:2753:9: warning: implicit conversion from
enumeration type 'enum sci_status' to different enumeration type 'enum
sci_task_status' [-Wenum-conversion]
        return status;
        ~~~~~~ ^~~~~~

Avoid all of these implicit conversion by just making
sci_controller_start_task use sci_status. This silences
Clang and has no functional change since sci_task_status
has all of its values mapped to something in sci_status.

Link: https://github.com/ClangBuiltLinux/linux/issues/153
Signed-off-by: Nathan Chancellor 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: isci: Use proper enumerated type in atapi_d2h_reg_frame_handler

2019-11-28T17:25:41+00:00

[ Upstream commit e9e9a103528c7e199ead6e5374c9c52cf16b5802 ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/scsi/isci/request.c:1629:13: warning: implicit conversion from
enumeration type 'enum sci_io_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
                        status = SCI_IO_FAILURE_RESPONSE_VALID;
                               ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/isci/request.c:1631:12: warning: implicit conversion from
enumeration type 'enum sci_io_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
                status = SCI_IO_FAILURE_RESPONSE_VALID;
                       ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~

status is of type sci_status but SCI_IO_FAILURE_RESPONSE_VALID is of
type sci_io_status. Use SCI_FAILURE_IO_RESPONSE_VALID, which is from
sci_status and has SCI_IO_FAILURE_RESPONSE_VALID's exact value since
that is what SCI_IO_FAILURE_RESPONSE_VALID is mapped to in the isci.h
file.

Link: https://github.com/ClangBuiltLinux/linux/issues/153
Signed-off-by: Nathan Chancellor 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: ips: fix missing break in switch

2019-11-28T17:25:40+00:00

[ Upstream commit 5d25ff7a544889bc4b749fda31778d6a18dddbcb ]

Add missing break statement in order to prevent the code from falling
through to case TEST_UNIT_READY.

Addresses-Coverity-ID: 1357338 ("Missing break in switch")
Suggested-by: Martin K. Petersen 
Signed-off-by: Gustavo A. R. Silva 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin