linux-stable.git/drivers/scsi, branch v4.4.196

scsi: core: Reduce memory required for SCSI logging

2019-10-07T19:01:01+00:00

[ Upstream commit dccc96abfb21dc19d69e707c38c8ba439bba7160 ]

The data structure used for log messages is so large that it can cause a
boot failure. Since allocations from that data structure can fail anyway,
use kmalloc() / kfree() instead of that data structure.

See also https://bugzilla.kernel.org/show_bug.cgi?id=204119.
See also commit ded85c193a39 ("scsi: Implement per-cpu logging buffer") # v4.0.

Reported-by: Jan Palus 
Cc: Christoph Hellwig 
Cc: Hannes Reinecke 
Cc: Johannes Thumshirn 
Cc: Ming Lei 
Cc: Jan Palus 
Signed-off-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: ufs: Fix NULL pointer dereference in ufshcd_config_vreg_hpm()

2019-09-06T08:18:14+00:00

[ Upstream commit 7c7cfdcf7f1777c7376fc9a239980de04b6b5ea1 ]

Fix the following BUG:

  [ 187.065689] BUG: kernel NULL pointer dereference, address: 000000000000001c
  [ 187.065790] RIP: 0010:ufshcd_vreg_set_hpm+0x3c/0x110 [ufshcd_core]
  [ 187.065938] Call Trace:
  [ 187.065959] ufshcd_resume+0x72/0x290 [ufshcd_core]
  [ 187.065980] ufshcd_system_resume+0x54/0x140 [ufshcd_core]
  [ 187.065993] ? pci_pm_restore+0xb0/0xb0
  [ 187.066005] ufshcd_pci_resume+0x15/0x20 [ufshcd_pci]
  [ 187.066017] pci_pm_thaw+0x4c/0x90
  [ 187.066030] dpm_run_callback+0x5b/0x150
  [ 187.066043] device_resume+0x11b/0x220

Voltage regulators are optional, so functions must check they exist
before dereferencing.

Note this issue is hidden if CONFIG_REGULATORS is not set, because the
offending code is optimised away.

Notes for stable:

The issue first appears in commit 57d104c153d3 ("ufs: add UFS power
management support") but is inadvertently fixed in commit 60f0187031c0
("scsi: ufs: disable vccq if it's not needed by UFS device") which in
turn was reverted by commit 730679817d83 ("Revert "scsi: ufs: disable vccq
if it's not needed by UFS device""). So fix applies v3.18 to v4.5 and
v5.1+

Fixes: 57d104c153d3 ("ufs: add UFS power management support")
Fixes: 730679817d83 ("Revert "scsi: ufs: disable vccq if it's not needed by UFS device"")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: fcoe: Embed fc_rport_priv in fcoe_rport structure

2019-08-25T08:53:04+00:00

commit 023358b136d490ca91735ac6490db3741af5a8bd upstream.

Gcc-9 complains for a memset across pointer boundaries, which happens as
the code tries to allocate a flexible array on the stack.  Turns out we
cannot do this without relying on gcc-isms, so with this patch we'll embed
the fc_rport_priv structure into fcoe_rport, can use the normal
'container_of' outcast, and will only have to do a memset over one
structure.

Signed-off-by: Hannes Reinecke 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: hpsa: correct scsi command status issue after reset

2019-08-25T08:53:00+00:00

[ Upstream commit eeebce1862970653cdf5c01e98bc669edd8f529a ]

Reviewed-by: Bader Ali - Saleh 
Reviewed-by: Scott Teel 
Reviewed-by: Scott Benesh 
Reviewed-by: Kevin Barnett 
Signed-off-by: Don Brace 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: mpt3sas: Use 63-bit DMA addressing on SAS35 HBA

2019-08-25T08:52:54+00:00

commit df9a606184bfdb5ae3ca9d226184e9489f5c24f7 upstream.

Although SAS3 & SAS3.5 IT HBA controllers support 64-bit DMA addressing, as
per hardware design, if DMA-able range contains all 64-bits
set (0xFFFFFFFF-FFFFFFFF) then it results in a firmware fault.

E.g. SGE's start address is 0xFFFFFFFF-FFFF000 and data length is 0x1000
bytes. when HBA tries to DMA the data at 0xFFFFFFFF-FFFFFFFF location then
HBA will fault the firmware.

Driver will set 63-bit DMA mask to ensure the above address will not be
used.

Cc:  # 5.1.20+
Signed-off-by: Suganath Prabu 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: ibmvfc: fix WARN_ON during event pool release

2019-08-25T08:52:50+00:00

[ Upstream commit 5578257ca0e21056821e6481bd534ba267b84e58 ]

While removing an ibmvfc client adapter a WARN_ON like the following
WARN_ON is seen in the kernel log:

WARNING: CPU: 6 PID: 5421 at ./include/linux/dma-mapping.h:541
ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc]
CPU: 6 PID: 5421 Comm: rmmod Tainted: G            E     4.17.0-rc1-next-20180419-autotest #1
NIP:  d00000000290328c LR: d00000000290325c CTR: c00000000036ee20
REGS: c000000288d1b7e0 TRAP: 0700   Tainted: G            E      (4.17.0-rc1-next-20180419-autotest)
MSR:  800000010282b033   CR: 44008828  XER: 20000000
CFAR: c00000000036e408 SOFTE: 1
GPR00: d00000000290325c c000000288d1ba60 d000000002917900 c000000289d75448
GPR04: 0000000000000071 c0000000ff870000 0000000018040000 0000000000000001
GPR08: 0000000000000000 c00000000156e838 0000000000000001 d00000000290c640
GPR12: c00000000036ee20 c00000001ec4dc00 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 00000100276901e0 0000000010020598
GPR20: 0000000010020550 0000000010020538 0000000010020578 00000000100205b0
GPR24: 0000000000000000 0000000000000000 0000000010020590 5deadbeef0000100
GPR28: 5deadbeef0000200 d000000002910b00 0000000000000071 c0000002822f87d8
NIP [d00000000290328c] ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc]
LR [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc]
Call Trace:
[c000000288d1ba60] [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc] (unreliable)
[c000000288d1baf0] [d000000002909390] ibmvfc_abort_task_set+0x7b0/0x8b0 [ibmvfc]
[c000000288d1bb70] [c0000000000d8c68] vio_bus_remove+0x68/0x100
[c000000288d1bbb0] [c0000000007da7c4] device_release_driver_internal+0x1f4/0x2d0
[c000000288d1bc00] [c0000000007da95c] driver_detach+0x7c/0x100
[c000000288d1bc40] [c0000000007d8af4] bus_remove_driver+0x84/0x140
[c000000288d1bcb0] [c0000000007db6ac] driver_unregister+0x4c/0xa0
[c000000288d1bd20] [c0000000000d6e7c] vio_unregister_driver+0x2c/0x50
[c000000288d1bd50] [d00000000290ba0c] cleanup_module+0x24/0x15e0 [ibmvfc]
[c000000288d1bd70] [c0000000001dadb0] sys_delete_module+0x220/0x2d0
[c000000288d1be30] [c00000000000b284] system_call+0x58/0x6c
Instruction dump:
e8410018 e87f0068 809f0078 e8bf0080 e8df0088 2fa30000 419e008c e9230200
2fa90000 419e0080 894d098a 794a07e0 <0b0a0000> e9290008 2fa90000 419e0028

This is tripped as a result of irqs being disabled during the call to
dma_free_coherent() by ibmvfc_free_event_pool(). At this point in the code path
we have quiesced the adapter and its overly paranoid anyways to be holding the
host lock.

Reported-by: Abdul Haleem 
Signed-off-by: Tyrel Datwyler 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: megaraid_sas: fix panic on loading firmware crashdump

2019-08-25T08:52:50+00:00

[ Upstream commit 3b5f307ef3cb5022bfe3c8ca5b8f2114d5bf6c29 ]

While loading fw crashdump in function fw_crash_buffer_show(), left bytes
in one dma chunk was not checked, if copying size over it, overflow access
will cause kernel panic.

Signed-off-by: Junxiao Bi 
Acked-by: Sumit Saxena 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: hpsa: correct ioaccel2 chaining

2019-07-10T07:56:41+00:00

[ Upstream commit 625d7d3518875c4d303c652a198feaa13d9f52d9 ]

- set ioaccel2_sg_element member 'chain_indicator' to IOACCEL2_LAST_SG for
  the last s/g element.

- set ioaccel2_sg_element member 'chain_indicator' to IOACCEL2_CHAIN when
  chaining.

Reviewed-by: Bader Ali - Saleh 
Reviewed-by: Scott Teel 
Reviewed-by: Matt Perricone 
Signed-off-by: Don Brace 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: ufs: Check that space was properly alloced in copy_query_response

2019-07-10T07:56:32+00:00

[ Upstream commit 1c90836f70f9a8ef7b7ad9e1fdd8961903e6ced6 ]

struct ufs_dev_cmd is the main container that supports device management
commands. In the case of a read descriptor request, we assume that the
proper space was allocated in dev_cmd to hold the returning descriptor.

This is no longer true, as there are flows that doesn't use dev_cmd for
device management requests, and was wrong in the first place.

Fixes: d44a5f98bb49 (ufs: query descriptor API)
Signed-off-by: Avri Altman 
Reviewed-by: Alim Akhtar 
Acked-by: Bean Huo 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: vmw_pscsi: Fix use-after-free in pvscsi_queue_lck()

2019-07-10T07:56:31+00:00

commit 240b4cc8fd5db138b675297d4226ec46594d9b3b upstream.

Once we unlock adapter->hw_lock in pvscsi_queue_lck() nothing prevents just
queued scsi_cmnd from completing and freeing the request. Thus cmd->cmnd[0]
dereference can dereference already freed request leading to kernel crashes
or other issues (which one of our customers observed). Store cmd->cmnd[0]
in a local variable before unlocking adapter->hw_lock to fix the issue.

CC: 
Signed-off-by: Jan Kara 
Reviewed-by: Ewan D. Milne 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman