linux-stable.git/drivers/scsi, branch v4.19.53

scsi: bnx2fc: fix incorrect cast to u64 on shift operation

2019-06-19T06:18:03+00:00

[ Upstream commit d0c0d902339249c75da85fd9257a86cbb98dfaa5 ]

Currently an int is being shifted and the result is being cast to a u64
which leads to undefined behaviour if the shift is more than 31 bits. Fix
this by casting the integer value 1 to u64 before the shift operation.

Addresses-Coverity: ("Bad shift operation")
Fixes: 7b594769120b ("[SCSI] bnx2fc: Handle REC_TOV error code from firmware")
Signed-off-by: Colin Ian King 
Acked-by: Saurav Kashyap 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: lpfc: add check for loss of ndlp when sending RRQ

2019-06-19T06:18:02+00:00

[ Upstream commit c8cb261a072c88ca1aff0e804a30db4c7606521b ]

There was a missing qualification of a valid ndlp structure when calling to
send an RRQ for an abort.  Add the check.

Signed-off-by: Dick Kennedy 
Signed-off-by: James Smart 
Tested-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: lpfc: correct rcu unlock issue in lpfc_nvme_info_show

2019-06-19T06:18:02+00:00

[ Upstream commit 79080d349f7f58a2e86c56043a3d04184d5f294a ]

Many of the exit cases were not releasing the rcu read lock.  Corrected the
exit paths.

Signed-off-by: Dick Kennedy 
Signed-off-by: James Smart 
Tested-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: qedi: remove set but not used variables 'cdev' and 'udev'

2019-06-19T06:18:02+00:00

[ Upstream commit d0adee5d12752256ff0c87ad7f002f21fe49d618 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/qedi/qedi_iscsi.c: In function 'qedi_ep_connect':
drivers/scsi/qedi/qedi_iscsi.c:813:23: warning: variable 'udev' set but not used [-Wunused-but-set-variable]
drivers/scsi/qedi/qedi_iscsi.c:812:18: warning: variable 'cdev' set but not used [-Wunused-but-set-variable]

These have never been used since introduction.

Signed-off-by: YueHaibing 
Acked-by: Manish Rangankar 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: qedi: remove memset/memcpy to nfunc and use func instead

2019-06-19T06:18:02+00:00

[ Upstream commit c09581a52765a85f19fc35340127396d5e3379cc ]

KASAN reports this:

BUG: KASAN: global-out-of-bounds in qedi_dbg_err+0xda/0x330 [qedi]
Read of size 31 at addr ffffffffc12b0ae0 by task syz-executor.0/2429

CPU: 0 PID: 2429 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xfa/0x1ce lib/dump_stack.c:113
 print_address_description+0x1c4/0x270 mm/kasan/report.c:187
 kasan_report+0x149/0x18d mm/kasan/report.c:317
 memcpy+0x1f/0x50 mm/kasan/common.c:130
 qedi_dbg_err+0xda/0x330 [qedi]
 ? 0xffffffffc12d0000
 qedi_init+0x118/0x1000 [qedi]
 ? 0xffffffffc12d0000
 ? 0xffffffffc12d0000
 ? 0xffffffffc12d0000
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f2d57e55c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bfa0 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 00000000200003c0 RDI: 0000000000000003
RBP: 00007f2d57e55c70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f2d57e566bc
R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004

The buggy address belongs to the variable:
 __func__.67584+0x0/0xffffffffffffd520 [qedi]

Memory state around the buggy address:
 ffffffffc12b0980: fa fa fa fa 00 04 fa fa fa fa fa fa 00 00 05 fa
 ffffffffc12b0a00: fa fa fa fa 00 00 04 fa fa fa fa fa 00 05 fa fa
> ffffffffc12b0a80: fa fa fa fa 00 06 fa fa fa fa fa fa 00 02 fa fa
                                                          ^
 ffffffffc12b0b00: fa fa fa fa 00 00 04 fa fa fa fa fa 00 00 03 fa
 ffffffffc12b0b80: fa fa fa fa 00 00 02 fa fa fa fa fa 00 00 04 fa

Currently the qedi_dbg_* family of functions can overrun the end of the
source string if it is less than the destination buffer length because of
the use of a fixed sized memcpy. Remove the memset/memcpy calls to nfunc
and just use func instead as it is always a null terminated string.

Reported-by: Hulk Robot 
Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Signed-off-by: YueHaibing 
Reviewed-by: Dan Carpenter 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: qla2xxx: Reset the FCF_ASYNC_{SENT|ACTIVE} flags

2019-06-15T09:54:09+00:00

[ Upstream commit 0257eda08e806b82ee1fc90ef73583b6f022845c ]

Driver maintains state machine for processing and completing switch
commands. This patch resets FCF_ASYNC_{SENT|ACTIVE} flag to indicate if the
previous command is active or sent, in order for next GPSC command to
advance the state machine.

[mkp: commit desc typo]

Signed-off-by: Giridhar Malavali 
Signed-off-by: Himanshu Madhani 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: lpfc: Fix backport of faf5a744f4f8 ("scsi: lpfc: avoid uninitialized variable warning")

2019-06-09T07:17:24+00:00

Prior to commit 4c47efc140fa ("scsi: lpfc: Move SCSI and NVME Stats to
hardware queue structures") upstream, we allocated a cstat structure in
lpfc_nvme_create_localport. When commit faf5a744f4f8 ("scsi: lpfc: avoid
uninitialized variable warning") was backported, it was placed after the
allocation so we leaked memory whenever this function was called and
that conditional was true (so whenever CONFIG_NVME_FC is disabled).

Move the IS_ENABLED if statement above the allocation since it is not
needed when the condition is true.

Reported-by: Pavel Machek 
Signed-off-by: Nathan Chancellor 
Reviewed-by: James Smart 
Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix SLI3 commands being issued on SLI4 devices

2019-05-31T13:46:33+00:00

[ Upstream commit c95a3b4b0fb8d351e2329a96f87c4fc96a149505 ]

During debug, it was seen that the driver is issuing commands specific to
SLI3 on SLI4 devices. Although the adapter correctly rejected the command,
this should not be done.

Revise the code to stop sending these commands on a SLI4 adapter.

Signed-off-by: Dick Kennedy 
Signed-off-by: James Smart 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: lpfc: Fix fc4type information for FDMI

2019-05-31T13:46:33+00:00

[ Upstream commit 32a80c093b524a0682f1c6166c910387b116ffce ]

The driver is reporting support for NVME even when not configured for NVME
operation.

Fix (and make more readable) when NVME protocol support is indicated.

Signed-off-by: Dick Kennedy 
Signed-off-by: James Smart 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: lpfc: Fix FDMI manufacturer attribute value

2019-05-31T13:46:33+00:00

[ Upstream commit d67f935b79a76ac9d86dde1a27bdd413feb5d987 ]

The FDMI manufacturer value being reported on Linux is inconsistent with
other OS's.

Set the value to "Emulex Corporation" for consistency.

Signed-off-by: Dick Kennedy 
Signed-off-by: James Smart 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin