linux-stable.git/drivers/scsi, branch v4.14.95

scsi: sd: Fix cache_type_store()

2019-01-23T07:09:48+00:00

commit 44759979a49bfd2d20d789add7fa81a21eb1a4ab upstream.

Changing of caching mode via /sys/devices/.../scsi_disk/.../cache_type may
fail if device responds to MODE SENSE command with DPOFUA flag set, and
then checks this flag to be not set on MODE SELECT command.

In this scenario, when trying to change cache_type, write always fails:

	# echo "none" >cache_type
	bash: echo: write error: Invalid argument

And following appears in dmesg:

	[13007.865745] sd 1:0:1:0: [sda] Sense Key : Illegal Request [current]
	[13007.865753] sd 1:0:1:0: [sda] Add. Sense: Invalid field in parameter list

From SBC-4 r15, 6.5.1 "Mode pages overview", description of DEVICE-SPECIFIC
PARAMETER field in the mode parameter header:
	...
	The write protect (WP) bit for mode data sent with a MODE SELECT
	command shall be ignored by the device server.
	...
	The DPOFUA bit is reserved for mode data sent with a MODE SELECT
	command.
	...

The remaining bits in the DEVICE-SPECIFIC PARAMETER byte are also reserved
and shall be set to zero.

[mkp: shuffled commentary to commit description]

Cc: stable@vger.kernel.org
Signed-off-by: Ivan Mironov 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: core: Synchronize request queue PM status only on successful resume

2019-01-23T07:09:48+00:00

commit 3f7e62bba0003f9c68f599f5997c4647ef5b4f4e upstream.

The commit 356fd2663cff ("scsi: Set request queue runtime PM status back to
active on resume") fixed up the inconsistent RPM status between request
queue and device. However changing request queue RPM status shall be done
only on successful resume, otherwise status may be still inconsistent as
below,

Request queue: RPM_ACTIVE
Device: RPM_SUSPENDED

This ends up soft lockup because requests can be submitted to underlying
devices but those devices and their required resource are not resumed.

For example,

After above inconsistent status happens, IO request can be submitted to UFS
device driver but required resource (like clock) is not resumed yet thus
lead to warning as below call stack,

WARN_ON(hba->clk_gating.state != CLKS_ON);
ufshcd_queuecommand
scsi_dispatch_cmd
scsi_request_fn
__blk_run_queue
cfq_insert_request
__elv_add_request
blk_flush_plug_list
blk_finish_plug
jbd2_journal_commit_transaction
kjournald2

We may see all behind IO requests hang because of no response from storage
host or device and then soft lockup happens in system. In the end, system
may crash in many ways.

Fixes: 356fd2663cff (scsi: Set request queue runtime PM status back to active on resume)
Cc: stable@vger.kernel.org
Signed-off-by: Stanley Chu 
Reviewed-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: do not set queue->page_count to 0 if pc_sli4_params.wqpcnt is invalid

2019-01-13T09:01:01+00:00

commit 4e87eb2f46ea547d12a276b2e696ab934d16cfb6 upstream.

Certain older adapters such as the OneConnect OCe10100 may not have a valid
wqpcnt value.  In this case, do not set queue->page_count to 0 in
lpfc_sli4_queue_alloc() as this will prevent the driver from initializing.

Fixes: 895427bd01 ("scsi: lpfc: NVME Initiator: Base modifications")
Cc: stable@vger.kernel.org # 4.11+
Signed-off-by: Ewan D. Milne 
Reviewed-by: Laurence Oberman 
Tested-by:   Laurence Oberman 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: bnx2fc: Fix NULL dereference in error handling

2019-01-13T09:00:57+00:00

[ Upstream commit 9ae4f8420ed7be4b13c96600e3568c144d101a23 ]

If "interface" is NULL then we can't release it and trying to will only
lead to an Oops.

Fixes: aea71a024914 ("[SCSI] bnx2fc: Introduce interface structure for each vlan interface")
Signed-off-by: Dan Carpenter 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: sd: use mempool for discard special page

2018-12-29T12:39:09+00:00

commit 61cce6f6eeced5ddd9cac55e807fe28b4f18c1ba upstream.

When boxes are run near (or to) OOM, we have a problem with the discard
page allocation in sd. If we fail allocating the special page, we return
busy, and it'll get retried. But since ordering is honored for dispatch
requests, we can keep retrying this same IO and failing. Behind that IO
could be requests that want to free memory, but they never get the
chance. This means you get repeated spews of traces like this:

[1201401.625972] Call Trace:
[1201401.631748]  dump_stack+0x4d/0x65
[1201401.639445]  warn_alloc+0xec/0x190
[1201401.647335]  __alloc_pages_slowpath+0xe84/0xf30
[1201401.657722]  ? get_page_from_freelist+0x11b/0xb10
[1201401.668475]  ? __alloc_pages_slowpath+0x2e/0xf30
[1201401.679054]  __alloc_pages_nodemask+0x1f9/0x210
[1201401.689424]  alloc_pages_current+0x8c/0x110
[1201401.699025]  sd_setup_write_same16_cmnd+0x51/0x150
[1201401.709987]  sd_init_command+0x49c/0xb70
[1201401.719029]  scsi_setup_cmnd+0x9c/0x160
[1201401.727877]  scsi_queue_rq+0x4d9/0x610
[1201401.736535]  blk_mq_dispatch_rq_list+0x19a/0x360
[1201401.747113]  blk_mq_sched_dispatch_requests+0xff/0x190
[1201401.758844]  __blk_mq_run_hw_queue+0x95/0xa0
[1201401.768653]  blk_mq_run_work_fn+0x2c/0x30
[1201401.777886]  process_one_work+0x14b/0x400
[1201401.787119]  worker_thread+0x4b/0x470
[1201401.795586]  kthread+0x110/0x150
[1201401.803089]  ? rescuer_thread+0x320/0x320
[1201401.812322]  ? kthread_park+0x90/0x90
[1201401.820787]  ? do_syscall_64+0x53/0x150
[1201401.829635]  ret_from_fork+0x29/0x40

Ensure that the discard page allocation has a mempool backing, so we
know we can make progress.

Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: vmw_pscsi: Rearrange code to avoid multiple calls to free_irq during unload

2018-12-21T13:13:12+00:00

[ Upstream commit 02f425f811cefcc4d325d7a72272651e622dc97e ]

Currently pvscsi_remove calls free_irq more than once as
pvscsi_release_resources and __pvscsi_shutdown both call
pvscsi_shutdown_intr. This results in a 'Trying to free already-free IRQ'
warning and stack trace. To solve the problem pvscsi_shutdown_intr has been
moved out of pvscsi_release_resources.

Signed-off-by: Cathy Avery 
Reviewed-by: Ewan D. Milne 
Reviewed-by: Dan Carpenter 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: libiscsi: Fix NULL pointer dereference in iscsi_eh_session_reset

2018-12-21T13:13:11+00:00

[ Upstream commit 5db6dd14b31397e8cccaaddab2ff44ebec1acf25 ]

This commit addresses NULL pointer dereference in iscsi_eh_session_reset.
Reference should not be made to session->leadconn when session->state is
set to ISCSI_STATE_TERMINATE.

Signed-off-by: Fred Herard 
Reviewed-by: Konrad Rzeszutek Wilk 
Reviewed-by: Lee Duncan 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: scsi_devinfo: cleanly zero-pad devinfo strings

2018-12-08T12:03:38+00:00

commit 81df022b688d43d2a3667518b2f755d384397910 upstream.

Cleanly fill memory for "vendor" and "model" with 0-bytes for the
"compatible" case rather than adding only a single 0 byte.  This
simplifies the devinfo code a a bit, and avoids mistakes in other places
of the code (not in current upstream, but we had one such mistake in the
SUSE kernel).

[mkp: applied by hand and added braces]

Signed-off-by: Martin Wilck 
Reviewed-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: bfa: convert to strlcpy/strlcat

2018-12-08T12:03:35+00:00

commit 8c5a50e8e7ad812a62f7ccf28d9a5e74fddf3000 upstream.

The bfa driver has a number of real issues with string termination
that gcc-8 now points out:

drivers/scsi/bfa/bfad_bsg.c: In function 'bfad_iocmd_port_get_attr':
drivers/scsi/bfa/bfad_bsg.c:320:9: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_psymb_init':
drivers/scsi/bfa/bfa_fcs.c:775:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:781:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:788:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:801:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:808:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_nsymb_init':
drivers/scsi/bfa/bfa_fcs.c:837:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:844:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:852:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_psymb_init':
drivers/scsi/bfa/bfa_fcs.c:778:2: error: 'strncat' output may be truncated copying 10 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:784:2: error: 'strncat' output may be truncated copying 30 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:803:3: error: 'strncat' output may be truncated copying 44 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:811:3: error: 'strncat' output may be truncated copying 16 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_nsymb_init':
drivers/scsi/bfa/bfa_fcs.c:840:2: error: 'strncat' output may be truncated copying 10 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:847:2: error: 'strncat' output may be truncated copying 30 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_fdmi_get_hbaattr':
drivers/scsi/bfa/bfa_fcs_lport.c:2657:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs_lport.c:2659:11: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ms_gmal_response':
drivers/scsi/bfa/bfa_fcs_lport.c:3232:5: error: 'strncpy' output may be truncated copying 16 bytes from a string of length 247 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ns_send_rspn_id':
drivers/scsi/bfa/bfa_fcs_lport.c:4670:3: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c:4682:3: error: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ns_util_send_rspn_id':
drivers/scsi/bfa/bfa_fcs_lport.c:5206:3: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c:5215:3: error: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_fdmi_get_portattr':
drivers/scsi/bfa/bfa_fcs_lport.c:2751:2: error: 'strncpy' specified bound 128 equals destination size [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcbuild.c: In function 'fc_rspnid_build':
drivers/scsi/bfa/bfa_fcbuild.c:1254:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcbuild.c:1253:25: note: length computed here
drivers/scsi/bfa/bfa_fcbuild.c: In function 'fc_rsnn_nn_build':
drivers/scsi/bfa/bfa_fcbuild.c:1275:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]

In most cases, this can be addressed by correctly calling strlcpy and
strlcat instead of strncpy/strncat, with the size of the destination
buffer as the last argument.

For consistency, I'm changing the other callers of strncpy() in this
driver the same way.

Signed-off-by: Arnd Bergmann 
Reviewed-by: Johannes Thumshirn 
Acked-by: Sudarsana Kalluru 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

SCSI: fix queue cleanup race before queue initialization is done

2018-11-21T08:24:09+00:00

commit 8dc765d438f1e42b3e8227b3b09fad7d73f4ec9a upstream.

c2856ae2f315d ("blk-mq: quiesce queue before freeing queue") has
already fixed this race, however the implied synchronize_rcu()
in blk_mq_quiesce_queue() can slow down LUN probe a lot, so caused
performance regression.

Then 1311326cf4755c7 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()")
tried to quiesce queue for avoiding unnecessary synchronize_rcu()
only when queue initialization is done, because it is usual to see
lots of inexistent LUNs which need to be probed.

However, turns out it isn't safe to quiesce queue only when queue
initialization is done. Because when one SCSI command is completed,
the user of sending command can be waken up immediately, then the
scsi device may be removed, meantime the run queue in scsi_end_request()
is still in-progress, so kernel panic can be caused.

In Red Hat QE lab, there are several reports about this kind of kernel
panic triggered during kernel booting.

This patch tries to address the issue by grabing one queue usage
counter during freeing one request and the following run queue.

Fixes: 1311326cf4755c7 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()")
Cc: Andrew Jones 
Cc: Bart Van Assche 
Cc: linux-scsi@vger.kernel.org
Cc: Martin K. Petersen 
Cc: Christoph Hellwig 
Cc: James E.J. Bottomley 
Cc: stable 
Cc: jianchao.wang 
Signed-off-by: Ming Lei 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman