linux-stable.git/drivers/scsi, branch v4.14.87

scsi: scsi_devinfo: cleanly zero-pad devinfo strings

2018-12-08T12:03:38+00:00

commit 81df022b688d43d2a3667518b2f755d384397910 upstream.

Cleanly fill memory for "vendor" and "model" with 0-bytes for the
"compatible" case rather than adding only a single 0 byte.  This
simplifies the devinfo code a a bit, and avoids mistakes in other places
of the code (not in current upstream, but we had one such mistake in the
SUSE kernel).

[mkp: applied by hand and added braces]

Signed-off-by: Martin Wilck 
Reviewed-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: bfa: convert to strlcpy/strlcat

2018-12-08T12:03:35+00:00

commit 8c5a50e8e7ad812a62f7ccf28d9a5e74fddf3000 upstream.

The bfa driver has a number of real issues with string termination
that gcc-8 now points out:

drivers/scsi/bfa/bfad_bsg.c: In function 'bfad_iocmd_port_get_attr':
drivers/scsi/bfa/bfad_bsg.c:320:9: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_psymb_init':
drivers/scsi/bfa/bfa_fcs.c:775:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:781:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:788:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:801:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:808:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_nsymb_init':
drivers/scsi/bfa/bfa_fcs.c:837:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:844:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:852:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_psymb_init':
drivers/scsi/bfa/bfa_fcs.c:778:2: error: 'strncat' output may be truncated copying 10 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:784:2: error: 'strncat' output may be truncated copying 30 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:803:3: error: 'strncat' output may be truncated copying 44 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:811:3: error: 'strncat' output may be truncated copying 16 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_nsymb_init':
drivers/scsi/bfa/bfa_fcs.c:840:2: error: 'strncat' output may be truncated copying 10 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:847:2: error: 'strncat' output may be truncated copying 30 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_fdmi_get_hbaattr':
drivers/scsi/bfa/bfa_fcs_lport.c:2657:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs_lport.c:2659:11: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ms_gmal_response':
drivers/scsi/bfa/bfa_fcs_lport.c:3232:5: error: 'strncpy' output may be truncated copying 16 bytes from a string of length 247 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ns_send_rspn_id':
drivers/scsi/bfa/bfa_fcs_lport.c:4670:3: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c:4682:3: error: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ns_util_send_rspn_id':
drivers/scsi/bfa/bfa_fcs_lport.c:5206:3: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c:5215:3: error: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_fdmi_get_portattr':
drivers/scsi/bfa/bfa_fcs_lport.c:2751:2: error: 'strncpy' specified bound 128 equals destination size [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcbuild.c: In function 'fc_rspnid_build':
drivers/scsi/bfa/bfa_fcbuild.c:1254:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcbuild.c:1253:25: note: length computed here
drivers/scsi/bfa/bfa_fcbuild.c: In function 'fc_rsnn_nn_build':
drivers/scsi/bfa/bfa_fcbuild.c:1275:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]

In most cases, this can be addressed by correctly calling strlcpy and
strlcat instead of strncpy/strncat, with the size of the destination
buffer as the last argument.

For consistency, I'm changing the other callers of strncpy() in this
driver the same way.

Signed-off-by: Arnd Bergmann 
Reviewed-by: Johannes Thumshirn 
Acked-by: Sudarsana Kalluru 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

SCSI: fix queue cleanup race before queue initialization is done

2018-11-21T08:24:09+00:00

commit 8dc765d438f1e42b3e8227b3b09fad7d73f4ec9a upstream.

c2856ae2f315d ("blk-mq: quiesce queue before freeing queue") has
already fixed this race, however the implied synchronize_rcu()
in blk_mq_quiesce_queue() can slow down LUN probe a lot, so caused
performance regression.

Then 1311326cf4755c7 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()")
tried to quiesce queue for avoiding unnecessary synchronize_rcu()
only when queue initialization is done, because it is usual to see
lots of inexistent LUNs which need to be probed.

However, turns out it isn't safe to quiesce queue only when queue
initialization is done. Because when one SCSI command is completed,
the user of sending command can be waken up immediately, then the
scsi device may be removed, meantime the run queue in scsi_end_request()
is still in-progress, so kernel panic can be caused.

In Red Hat QE lab, there are several reports about this kind of kernel
panic triggered during kernel booting.

This patch tries to address the issue by grabing one queue usage
counter during freeing one request and the following run queue.

Fixes: 1311326cf4755c7 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()")
Cc: Andrew Jones 
Cc: Bart Van Assche 
Cc: linux-scsi@vger.kernel.org
Cc: Martin K. Petersen 
Cc: Christoph Hellwig 
Cc: James E.J. Bottomley 
Cc: stable 
Cc: jianchao.wang 
Signed-off-by: Ming Lei 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Initialize port speed to avoid setting lower speed

2018-11-21T08:24:08+00:00

commit f635e48e866ee1a47d2d42ce012fdcc07bf55853 upstream.

This patch initializes port speed so that firmware does not set lower
operating speed. Setting lower speed in firmware impacts WRITE perfomance.

Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery")
Cc: 
Signed-off-by: Quinn Tran 
Signed-off-by: Himanshu Madhani 
Tested-by: Laurence Oberman 
Reviewed-by: Ewan D. Milne 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Fix re-using LoopID when handle is in use

2018-11-21T08:24:05+00:00

commit 5c6400536481d9ef44ef94e7bf2c7b8e81534db7 upstream.

This patch fixes issue where driver clears NPort ID map instead of marking
handle in use. Once driver clears NPort ID from the database, it can reuse
the same NPort ID resulting in a PLOGI failure.

[mkp: fixed Himanshu's SoB]

Fixes: a084fd68e1d2 ("scsi: qla2xxx: Fix re-login for Nport Handle in use")
Cc: 
Signed-of-by: Quinn Tran 
Reviewed-by: Ewan D. Milne 
Signed-off-by: Himanshu Madhani 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: shutdown chip if reset fail

2018-11-21T08:24:05+00:00

commit 1e4ac5d6fe0a4af17e4b6251b884485832bf75a3 upstream.

If chip unable to fully initialize, use full shutdown sequence to clear out
any stale FW state.

Fixes: e315cd28b9ef ("[SCSI] qla2xxx: Code changes for qla data structure refactoring")
Cc: stable@vger.kernel.org  #4.10
Signed-off-by: Quinn Tran 
Signed-off-by: Himanshu Madhani 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Remove stale debug trace message from tcm_qla2xxx

2018-11-21T08:24:05+00:00

commit 7c388f91ec1a59b0ed815b07b90536e2d57e1e1f upstream.

Remove stale debug trace.

Fixes: 1eb42f965ced ("qla2xxx: Make trace flags more readable")
Cc: stable@vger.kernel.org #4.10
Signed-off-by: Quinn Tran 
Signed-off-by: Himanshu Madhani 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Fix process response queue for ISP26XX and above

2018-11-21T08:24:05+00:00

commit b86ac8fd4b2f6ec2f9ca9194c56eac12d620096f upstream.

This patch improves performance for 16G and above adapter by removing
additional call to process_response_queue().

[mkp: typo]

Cc: 
Signed-off-by: Quinn Tran 
Signed-off-by: Himanshu Madhani 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Fix incorrect port speed being set for FC adapters

2018-11-21T08:24:05+00:00

commit 4c1458df9635c7e3ced155f594d2e7dfd7254e21 upstream.

Fixes: 6246b8a1d26c7c ("[SCSI] qla2xxx: Enhancements to support ISP83xx.")
Fixes: 1bb395485160d2 ("qla2xxx: Correct iiDMA-update calling conventions.")
Cc: 
Signed-off-by: Himanshu Madhani 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Correct race with abort on completion path

2018-11-13T19:15:00+00:00

[ Upstream commit ca7fb76e091f889cfda1287c07a9358f73832b39 ]

On io completion, the driver is taking an adapter wide lock and nulling the
scsi command back pointer.  The nulling of the back pointer is to signify the
io was completed and the scsi_done() routine was called.  However, the routine
makes no check to see if the abort routine had done the same thing and
possibly nulled the pointer. Thus it may doubly-complete the io.

Make the following mods:

- Check to make sure forward progress (call scsi_done()) only happens if the
  command pointer was non-null.

- As the taking of the lock, which is adapter wide, is very costly on a system
  under load, null the pointer using an xchg operation rather than under lock.

Signed-off-by: Dick Kennedy 
Signed-off-by: James Smart 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman