linux-stable.git/drivers/scsi, branch v4.14.80

scsi: sd: Remember that READ CAPACITY(16) succeeded

2018-11-04T13:52:45+00:00

[ Upstream commit 597d74005ba85e87c256cd732128ebf7faf54247 ]

The USB storage glue sets the try_rc_10_first flag in an attempt to
avoid wedging poorly implemented legacy USB devices.

If the device capacity is too large to be expressed in the provided
response buffer field of READ CAPACITY(10), a well-behaved device will
set the reported capacity to 0xFFFFFFFF. We will then attempt to issue a
READ CAPACITY(16) to obtain the real capacity.

Since this part of the discovery logic is not covered by the first_scan
flag, a warning will be printed a couple of times times per revalidate
attempt if we upgrade from READ CAPACITY(10) to READ CAPACITY(16).

Remember that we have successfully issued READ CAPACITY(16) so we can
take the fast path on subsequent revalidate attempts.

Reported-by: Menion 
Reviewed-by: Laurence Oberman 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: ibmvfc: Avoid unnecessary port relogin

2018-11-04T13:52:45+00:00

[ Upstream commit 09dd15e0d9547ca424de4043bcd429bab6f285c8 ]

Following an RSCN, ibmvfc will issue an ADISC to determine if the
underlying target has changed, comparing the SCSI ID, WWPN, and WWNN to
determine how to handle the rport in discovery. However, the comparison
of the WWPN and WWNN was performing a memcmp between a big endian field
against a CPU endian field, which resulted in the wrong answer on LE
systems. This was observed as unexpected errors getting logged at boot
time as targets were getting relogins when not needed.

Signed-off-by: Brian King 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: qla2xxx: Avoid double completion of abort command

2018-11-04T13:52:43+00:00

[ Upstream commit 3a9910d7b686546dcc9986e790af17e148f1c888 ]

qla2x00_tmf_sp_done() now deletes the timer that will run
qla2x00_tmf_iocb_timeout(), but doesn't check whether the timer already
expired.  Check the return value from del_timer() to avoid calling
complete() a second time.

Fixes: 4440e46d5db7 ("[SCSI] qla2xxx: Add IOCB Abort command asynchronous ...")
Fixes: 1514839b3664 ("scsi: qla2xxx: Fix NULL pointer crash due to active ...")
Signed-off-by: Ben Hutchings 
Acked-by: Himanshu Madhani 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: aacraid: address UBSAN warning regression

2018-11-04T13:52:42+00:00

[ Upstream commit d18539754d97876503275efc7d00a1901bb0cfad ]

As reported by Meelis Roos, my previous patch causes an incorrect
calculation of the timeout, through an undefined signed integer
overflow:

[   12.228155] UBSAN: Undefined behaviour in drivers/scsi/aacraid/commsup.c:2514:49
[   12.228229] signed integer overflow:
[   12.228283] 964297611 * 250 cannot be represented in type 'long int'

The problem is that doing a multiplication with HZ first and then
dividing by USEC_PER_SEC worked correctly for 32-bit microseconds,
but not for 32-bit nanoseconds, which would require up to 41 bits.

This reworks the calculation to first convert the nanoseconds into
jiffies, which should give us the same result as before and not overflow.

Unfortunately I did not understand the exact intention of the algorithm,
in particular the part where we add half a second, so it's possible that
there is still a preexisting problem in this function. I added a comment
that this would be handled more nicely using usleep_range(), which
generally works better for waking up at a particular time than the
current schedule_timeout() based implementation. I did not feel
comfortable trying to implement that without being sure what the
intent is here though.

Fixes: 820f18865912 ("scsi: aacraid: use timespec64 instead of timeval")
Tested-by: Meelis Roos 
Signed-off-by: Arnd Bergmann 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: sd: don't crash the host on invalid commands

2018-10-20T07:48:51+00:00

[ Upstream commit f1f1fadacaf08b7cf11714c0c29f8fa4d4ef68a9 ]

When sd_init_command() get's a command with a unknown req_op() it crashes the
system via BUG().

This makes debugging the actual reason for the broken request cmd_flags pretty
hard as the system is down before it's able to write out debugging data on the
serial console or the trace buffer.

Change the BUG() to a WARN_ON() and return BLKPREP_KILL to fail gracefully and
return an I/O error to the producer of the request.

Signed-off-by: Johannes Thumshirn 
Cc: Hannes Reinecke 
Cc: Bart Van Assche 
Cc: Christoph Hellwig 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: ipr: System hung while dlpar adding primary ipr adapter back

2018-10-20T07:48:51+00:00

[ Upstream commit 318ddb34b2052f838aa243d07173e2badf3e630e ]

While dlpar adding primary ipr adapter back, driver goes through adapter
initialization then schedule ipr_worker_thread to start te disk scan by
dropping the host lock, calling scsi_add_device.  Then get the adapter reset
request again, so driver does scsi_block_requests, this will cause the
scsi_add_device get hung until we unblock. But we can't run ipr_worker_thread
to do the unblock because its stuck in scsi_add_device.

This patch fixes the issue.

[mkp: typo and whitespace fixes]

Signed-off-by: Wen Xiong 
Acked-by: Brian King 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: ibmvscsis: Ensure partition name is properly NUL terminated

2018-10-20T07:48:50+00:00

[ Upstream commit adad633af7b970bfa5dd1b624a4afc83cac9b235 ]

While reviewing another part of the code, Kees noticed that the strncpy of the
partition name might not always be NUL terminated. Switch to using strscpy
which does this safely.

Reported-by: Kees Cook 
Signed-off-by: Laura Abbott 
Reviewed-by: Kees Cook 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: ibmvscsis: Fix a stringop-overflow warning

2018-10-20T07:48:49+00:00

[ Upstream commit d792d4c4fc866ae224b0b0ca2aabd87d23b4d6cc ]

There's currently a warning about string overflow with strncat:

drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c: In function 'ibmvscsis_probe':
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:3479:2: error: 'strncat' specified
bound 64 equals destination size [-Werror=stringop-overflow=]
  strncat(vscsi->eye, vdev->name, MAX_EYE);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Switch to a single snprintf instead of a strcpy + strcat to handle this
cleanly.

Signed-off-by: Laura Abbott 
Suggested-by: Kees Cook 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Fix an endian bug in fcpcmd_is_corrupted()

2018-10-18T07:16:22+00:00

[ Upstream commit cbe3fd39d223f14b1c60c80fe9347a3dd08c2edb ]

We should first do the le16_to_cpu endian conversion and then apply the
FCP_CMD_LENGTH_MASK mask.

Fixes: 5f35509db179 ("qla2xxx: Terminate exchange if corrupted")
Signed-off-by: Dan Carpenter 
Acked-by: Quinn Tran 
Acked-by: Himanshu Madhani 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: qedi: Add the CRC size within iSCSI NVM image

2018-10-10T06:54:23+00:00

[ Upstream commit c77a2fa3ff8f73d1a485e67e6f81c64823739d59 ]

The QED driver commit, 1ac4329a1cff ("qed: Add configuration information
to register dump and debug data"), removes the CRC length validation
causing nvm_get_image failure while loading qedi driver:

[qed_mcp_get_nvm_image:2700(host_10-0)]Image [0] is too big - 00006008 bytes
where only 00006004 are available
[qedi_get_boot_info:2253]:10: Could not get NVM image. ret = -12

Hence add and adjust the CRC size to iSCSI NVM image to read boot info at
qedi load time.

Signed-off-by: Nilesh Javali 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman