linux-stable.git/drivers/scsi, branch v4.10.2

scsi: lpfc: Correct WQ creation for pagesize

2017-03-12T05:44:21+00:00

commit 8ea73db486cda442f0671f4bc9c03a76be398a28 upstream.

Correct WQ creation for pagesize

The driver was calculating the adapter command pagesize indicator from
the system pagesize. However, the buffers the driver allocates are only
one size (SLI4_PAGE_SIZE), so no calculation was necessary.

Signed-off-by: Dick Kennedy 
Signed-off-by: James Smart 
Reviewed-by: Hannes Reinecke 
Reviewed-by: Johannes Thumshirn 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen 
Cc: Mauricio Faria de Oliveira 
Signed-off-by: Greg Kroah-Hartman

scsi: use 'scsi_device_from_queue()' for scsi_dh

2017-03-12T05:44:12+00:00

commit 857de6e00778738dc3d61f75acbac35bdc48e533 upstream.

The device handler needs to check if a given queue belongs to a scsi
device; only then does it make sense to attach a device handler.

[mkp: dropped flags]

Signed-off-by: Hannes Reinecke 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: aacraid: Reorder Adapter status check

2017-03-12T05:44:12+00:00

commit c421530bf848604e97d0785a03b3fe2c62775083 upstream.

The driver currently checks the SELF_TEST_FAILED first and then
KERNEL_PANIC next. Under error conditions(boot code failure) both
SELF_TEST_FAILED and KERNEL_PANIC can be set at the same time.

The driver has the capability to reset the controller on an KERNEL_PANIC,
but not on SELF_TEST_FAILED.

Fixed by first checking KERNEL_PANIC and then the others.

Fixes: e8b12f0fb835223752 ([SCSI] aacraid: Add new code for PMC-Sierra's SRC base controller family)
Signed-off-by: Raghava Aditya Renukunta 
Reviewed-by: David Carroll 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Fix Regression introduced by pci_alloc_irq_vectors_affinity call.

2017-03-12T05:44:12+00:00

commit 67f2db8792f96d8f7521461635d25f9c80245d80 upstream.

For target mode, we need to increase minimum vectors value by one to
account for ATIO queue.

Following stack trace will be seen

Call Trace:
qla24xx_config_rings+0x15a/0x230 [qla2xxx]
qla2x00_init_rings+0x1a1/0x3a0 [qla2xxx]
qla2x00_restart_isp+0x5c/0x120 [qla2xxx]
qla2x00_abort_isp+0x138/0x430 [qla2xxx]
? __schedule+0x260/0x580
qla2x00_do_dpc+0x3bc/0x920 [qla2xxx]
? qla2x00_relogin+0x290/0x290 [qla2xxx]
? schedule+0x3a/0xa0
? qla2x00_relogin+0x290/0x290 [qla2xxx]
kthread+0x103/0x140
? __kthread_init_worker+0x40/0x40
ret_from_fork+0x29/0x40

RIP: qlt_24xx_config_rings+0x6c/0x90

[mkp: fixed Fixes: hash]

Fixes: 17e5fc58588b ("scsi: qla2xxx: fix MSI-X vector affinity")
Signed-off-by: Michael Hernandez 
Signed-off-by: Himanshu Madhani 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Fix response queue count for Target mode.

2017-03-12T05:44:11+00:00

commit d0d2c68b759bbf678e078fd0c71b5fde65a9392c upstream.

Target mode initialization was not calculating response queue values
correctly resulting into one less MSI-X vector.

[mkp: fixed Fixes: hash]

Fixes: 093df73771ba ("scsi: qla2xxx: Fix Target mode handling with Multiqueue changes.")
Signed-off-by: Michael Hernandez 
Signed-off-by: Himanshu Madhani 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Cleaned up queue configuration code.

2017-03-12T05:44:11+00:00

commit f54f2cb540b53d55a81d620e816810d59be5cb1b upstream.

This patch cleaned up queue configuration code, such that once
initialized, we should not touch msix_count value.  This will prevent
incorrect numbers of MSI-X vectors requested while performing target
mode configuration.

[mkp: fixed Fixes: hash]

Fixes: d74595278f4a ("scsi: qla2xxx: Add multiple queue pair functionality.")
Signed-off-by: Michael Hernandez 
Signed-off-by: Himanshu Madhani 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: storvsc: properly set residual data length on errors

2017-03-12T05:44:11+00:00

commit 40630f462824ee24bc00d692865c86c3828094e0 upstream.

On I/O errors, the Windows driver doesn't set data_transfer_length
on error conditions other than SRB_STATUS_DATA_OVERRUN.
In these cases we need to set data_transfer_length to 0,
indicating there is no data transferred. On SRB_STATUS_DATA_OVERRUN,
data_transfer_length is set by the Windows driver to the actual data transferred.

Reported-by: Shiva Krishna 
Signed-off-by: Long Li 
Reviewed-by: K. Y. Srinivasan 
Signed-off-by: K. Y. Srinivasan 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: storvsc: properly handle SRB_ERROR when sense message is present

2017-03-12T05:44:11+00:00

commit bba5dc332ec2d3a685cb4dae668c793f6a3713a3 upstream.

When sense message is present on error, we should pass along to the upper
layer to decide how to deal with the error.
This patch fixes connectivity issues with Fiber Channel devices.

Signed-off-by: Long Li 
Reviewed-by: K. Y. Srinivasan 
Signed-off-by: K. Y. Srinivasan 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: storvsc: use tagged SRB requests if supported by the device

2017-03-12T05:44:11+00:00

commit 3cd6d3d9b1abab8dcdf0800224ce26daac24eea2 upstream.

Properly set SRB flags when hosting device supports tagged queuing.
This patch improves the performance on Fiber Channel disks.

Signed-off-by: Long Li 
Reviewed-by: K. Y. Srinivasan 
Signed-off-by: K. Y. Srinivasan 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

Fix missing sanity check in /dev/sg

2017-02-19T17:54:31+00:00

What happens is that a write to /dev/sg is given a request with non-zero
->iovec_count combined with zero ->dxfer_len.  Or with ->dxferp pointing
to an array full of empty iovecs.

Having write permission to /dev/sg shouldn't be equivalent to the
ability to trigger BUG_ON() while holding spinlocks...

Found by Dmitry Vyukov and syzkaller.

[ The BUG_ON() got changed to a WARN_ON_ONCE(), but this fixes the
  underlying issue.  - Linus ]

Signed-off-by: Al Viro 
Reported-by: Dmitry Vyukov 
Reviewed-by: Christoph Hellwig 
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds