linux-stable.git/drivers/scsi, branch v3.18.97

scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info

2018-02-28T09:16:17+00:00

commit c39813652700f3df552b6557530f1e5f782dbe2f upstream.

The fcp_rsp_info structure as defined in the FC spec has an initial 3
bytes reserved field. The ibmvfc driver mistakenly defined this field as
4 bytes resulting in the rsp_code field being defined in what should be
the start of the second reserved field and thus always being reported as
zero by the driver.

Ideally, we should wire ibmvfc up with libfc for the sake of code
deduplication, and ease of maintaining standardized structures in a
single place. However, for now simply fixup the definition in ibmvfc for
backporting to distros on older kernels. Wiring up with libfc will be
done in a followup patch.

Cc: 
Reported-by: Hannes Reinecke 
Signed-off-by: Tyrel Datwyler 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: ufs: ufshcd: fix potential NULL pointer dereference in ufshcd_config_vreg

2018-02-07T19:07:56+00:00

[ Upstream commit 727535903bea924c4f73abb202c4b3e85fff0ca4 ]

_vreg_ is being dereferenced before it is null checked, hence there is a
potential null pointer dereference.

Fix this by moving the pointer dereference after _vreg_ has been null
checked.

This issue was detected with the help of Coccinelle.

Fixes: aa4976130934 ("ufs: Add regulator enable support")
Signed-off-by: Gustavo A. R. Silva 
Reviewed-by: Subhash Jadavani 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: libiscsi: fix shifting of DID_REQUEUE host byte

2018-01-31T13:46:14+00:00

commit eef9ffdf9cd39b2986367bc8395e2772bc1284ba upstream.

The SCSI host byte should be shifted left by 16 in order to have
scsi_decide_disposition() do the right thing (.i.e. requeue the
command).

Signed-off-by: Johannes Thumshirn 
Fixes: 661134ad3765 ("[SCSI] libiscsi, bnx2i: make bound ep check common")
Cc: Lee Duncan 
Cc: Hannes Reinecke 
Cc: Bart Van Assche 
Cc: Chris Leech 
Acked-by: Lee Duncan 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: sg: disable SET_FORCE_LOW_DMA

2018-01-31T13:46:11+00:00

commit 745dfa0d8ec26b24f3304459ff6e9eacc5c8351b upstream.

The ioctl SET_FORCE_LOW_DMA has never worked since the initial git
check-in, and the respective setting is nowadays handled correctly. So
disable it entirely.

Signed-off-by: Hannes Reinecke 
Reviewed-by: Johannes Thumshirn 
Tested-by: Johannes Thumshirn 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: PLOGI failures during NPIV testing

2017-12-25T13:20:09+00:00

[ Upstream commit e8bcf0ae4c0346fdc78ebefe0eefcaa6a6622d38 ]

Local Reject/Invalid RPI errors seen during discovery.

Temporary RPI cleanup was occurring regardless of SLI rev. It's only
necessary on SLI-4.

Adjust the test for whether cleanup is necessary.

Signed-off-by: Dick Kennedy 
Signed-off-by: James Smart 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix secure firmware updates

2017-12-25T13:20:09+00:00

[ Upstream commit 184fc2b9a8bcbda9c14d0a1e7fbecfc028c7702e ]

Firmware update fails with: status x17 add_status x56 on the final write

If multiple DMA buffers are used for the download, some firmware revs
have difficulty with signatures and crcs split across the dma buffer
boundaries.  Resolve by making all writes be a single 4k page in length.

Signed-off-by: Dick Kennedy 
Signed-off-by: James Smart 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: cxgb4i: fix Tx skb leak

2017-12-25T13:20:09+00:00

[ Upstream commit 9b3a081fb62158b50bcc90522ca2423017544367 ]

In case of connection reset Tx skb queue can have some skbs which are
not transmitted so purge Tx skb queue in release_offload_resources() to
avoid skb leak.

Signed-off-by: Varun Prakash 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix PT2PT PRLI reject

2017-12-25T13:20:07+00:00

[ Upstream commit a71e3cdcfce4880a4578915e110e3eaed1659765 ]

lpfc cannot establish connection with targets that send PRLI in P2P
configurations.

If lpfc rejects a PRLI that is sent from a target the target will not
resend and will reject the PRLI send from the initiator.

[mkp: applied by hand]

Signed-off-by: Dick Kennedy 
Signed-off-by: James Smart 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: bfa: integer overflow in debugfs

2017-12-20T09:01:34+00:00

[ Upstream commit 3e351275655d3c84dc28abf170def9786db5176d ]

We could allocate less memory than intended because we do:

	bfad->regdata = kzalloc(len << 2, GFP_KERNEL);

The shift can overflow leading to a crash.  This is debugfs code so the
impact is very small.  I fixed the network version of this in March with
commit 13e2d5187f6b ("bna: integer overflow bug in debugfs").

Fixes: ab2a9ba189e8 ("[SCSI] bfa: add debugfs support")
Signed-off-by: Dan Carpenter 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: scsi_devinfo: Add REPORTLUN2 to EMC SYMMETRIX blacklist entry

2017-12-20T09:01:34+00:00

[ Upstream commit 909cf3e16a5274fe2127cf3cea5c8dba77b2c412 ]

All EMC SYMMETRIX support REPORT_LUNS, even if configured to report
SCSI-2 for whatever reason.

Signed-off-by: Kurt Garloff 
Signed-off-by: Hannes Reinecke 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman