linux-stable.git/drivers/scsi, branch v3.16.35

sd: Fix excessive capacity printing on devices with blocks bigger than 512 bytes

2016-04-30T22:06:07+00:00

commit f08bb1e0dbdd0297258d0b8cd4dbfcc057e57b2a upstream.

During revalidate we check whether device capacity has changed before we
decide whether to output disk information or not.

The check for old capacity failed to take into account that we scaled
sdkp->capacity based on the reported logical block size. And therefore
the capacity test would always fail for devices with sectors bigger than
512 bytes and we would print several copies of the same discovery
information.

Avoid scaling sdkp->capacity and instead adjust the value on the fly
when setting the block device capacity and generating fake C/H/S
geometry.

Signed-off-by: Martin K. Petersen 
Reported-by: Hannes Reinecke 
Reviewed-by: Hannes Reinicke 
Reviewed-by: Ewan Milne 
Signed-off-by: Martin K. Petersen 
[bwh: Backported to 3.16:
 - logical_to_sectors() is a new function
 - Adjust context]
Signed-off-by: Ben Hutchings

lpfc: fix misleading indentation

2016-04-30T22:06:02+00:00

commit aeb6641f8ebdd61939f462a8255b316f9bfab707 upstream.

gcc-6 complains about the indentation of the lpfc_destroy_vport_work_array()
call in lpfc_online(), which clearly doesn't look right:

drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_online':
drivers/scsi/lpfc/lpfc_init.c:2880:3: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation]
   lpfc_destroy_vport_work_array(phba, vports);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/lpfc/lpfc_init.c:2863:2: note: ...this 'if' clause, but it is not
  if (vports != NULL)
  ^~

Looking at the patch that introduced this code, it's clear that the
behavior is correct and the indentation is wrong.

This fixes the indentation and adds curly braces around the previous
if() block for clarity, as that is most likely what caused the code
to be misindented in the first place.

Signed-off-by: Arnd Bergmann 
Fixes: 549e55cd2a1b ("[SCSI] lpfc 8.2.2 : Fix locking around HBA's port_list")
Reviewed-by: Sebastian Herbszt 
Reviewed-by: Hannes Reinecke 
Reviewed-by: Ewan D. Milne 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Ben Hutchings

sg: fix dxferp in from_to case

2016-04-30T22:05:57+00:00

commit 5ecee0a3ee8d74b6950cb41e8989b0c2174568d4 upstream.

One of the strange things that the original sg driver did was let the
user provide both a data-out buffer (it followed the sg_header+cdb)
_and_ specify a reply length greater than zero. What happened was that
the user data-out buffer was copied into some kernel buffers and then
the mid level was told a read type operation would take place with the
data from the device overwriting the same kernel buffers. The user would
then read those kernel buffers back into the user space.

From what I can tell, the above action was broken by commit fad7f01e61bf
("sg: set dxferp to NULL for READ with the older SG interface") in 2008
and syzkaller found that out recently.

Make sure that a user space pointer is passed through when data follows
the sg_header structure and command.  Fix the abnormal case when a
non-zero reply_len is also given.

Fixes: fad7f01e61bf737fe8a3740d803f000db57ecac6
Signed-off-by: Douglas Gilbert 
Reviewed-by: Ewan Milne 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Ben Hutchings

be2iscsi: set the boot_kset pointer to NULL in case of failure

2016-04-30T22:05:56+00:00

commit 84bd64993f916bcf86270c67686ecf4cea7b8933 upstream.

In beiscsi_setup_boot_info(), the boot_kset pointer should be set to
NULL in case of failure otherwise an invalid pointer dereference may
occur later.

Signed-off-by: Maurizio Lombardi 
Reviewed-by: Johannes Thumshirn 
Reviewed-by: Jitendra Bhivare 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Ben Hutchings

aacraid: Fix memory leak in aac_fib_map_free

2016-04-30T22:05:50+00:00

commit f88fa79a61726ce9434df9b4aede36961f709f17 upstream.

aac_fib_map_free() calls pci_free_consistent() without checking that
dev->hw_fib_va is not NULL and dev->max_fib_size is not zero.If they are
indeed NULL/0, this will result in a hang as pci_free_consistent() will
attempt to invalidate cache for the entire 64-bit address space
(which would take a very long time).

Fixed by adding a check to make sure that dev->hw_fib_va and
dev->max_fib_size are not NULL and 0 respectively.

Fixes: 9ad5204d6 - "[SCSI]aacraid: incorrect dma mapping mask during blinked recover or user initiated reset"

Signed-off-by: Raghava Aditya Renukunta 
Reviewed-by: Johannes Thumshirn 
Reviewed-by: Tomas Henzl 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Ben Hutchings

ipr: Fix regression when loading firmware

2016-03-30T11:05:35+00:00

commit 21b81716c6bff24cda52dc75588455f879ddbfe9 upstream.

Commit d63c7dd5bcb9 ("ipr: Fix out-of-bounds null overwrite") removed
the end of line handling when storing the update_fw sysfs attribute.
This changed the userpace API because it started refusing writes
terminated by a line feed, which broke the update tools we already have.

This patch re-adds that handling, so both a write terminated by a line
feed or not can make it through with the update.

Fixes: d63c7dd5bcb9 ("ipr: Fix out-of-bounds null overwrite")
Signed-off-by: Gabriel Krisman Bertazi 
Cc: Insu Yun 
Acked-by: Brian King 
Signed-off-by: Martin K. Petersen 
Cc: Ben Hutchings 
Signed-off-by: Luis Henriques

ipr: Fix out-of-bounds null overwrite

2016-03-30T11:04:47+00:00

commit d63c7dd5bcb9441af0526d370c43a65ca2c980d9 upstream.

Return value of snprintf is not bound by size value, 2nd argument.
(https://www.kernel.org/doc/htmldocs/kernel-api/API-snprintf.html).
Return value is number of printed chars, can be larger than 2nd
argument.  Therefore, it can write null byte out of bounds ofbuffer.
Since snprintf puts null, it does not need to put additional null byte.

Signed-off-by: Insu Yun 
Reviewed-by: Shane Seymour 
Signed-off-by: Martin K. Petersen 
Cc: Ben Hutchings 
Signed-off-by: Luis Henriques

scsi: fix soft lockup in scsi_remove_target() on module removal

2016-03-04T10:26:39+00:00

commit 90a88d6ef88edcfc4f644dddc7eef4ea41bccf8b upstream.

This softlockup is currently happening:

[  444.088002] NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [kworker/1:1:29]
[  444.088002] Modules linked in: lpfc(-) qla2x00tgt(O) qla2xxx_scst(O) scst_vdisk(O) scsi_transport_fc libcrc32c scst(O) dlm configfs nfsd lockd grace nfs_acl auth_rpcgss sunrpc ed
d snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device dm_mod iTCO_wdt snd_hda_codec_realtek snd_hda_codec_generic gpio_ich iTCO_vendor_support ppdev snd_hda_intel snd_hda_codec snd_hda
_core snd_hwdep tg3 snd_pcm snd_timer libphy lpc_ich parport_pc ptp acpi_cpufreq snd pps_core fjes parport i2c_i801 ehci_pci tpm_tis tpm sr_mod cdrom soundcore floppy hwmon sg 8250_
fintek pcspkr i915 drm_kms_helper uhci_hcd ehci_hcd drm fb_sys_fops sysimgblt sysfillrect syscopyarea i2c_algo_bit usbcore button video usb_common fan ata_generic ata_piix libata th
ermal
[  444.088002] CPU: 1 PID: 29 Comm: kworker/1:1 Tainted: G           O    4.4.0-rc5-2.g1e923a3-default #1
[  444.088002] Hardware name: FUJITSU SIEMENS ESPRIMO E           /D2164-A1, BIOS 5.00 R1.10.2164.A1               05/08/2006
[  444.088002] Workqueue: fc_wq_4 fc_rport_final_delete [scsi_transport_fc]
[  444.088002] task: f6266ec0 ti: f6268000 task.ti: f6268000
[  444.088002] EIP: 0060:[] EFLAGS: 00000286 CPU: 1
[  444.088002] EIP is at _raw_spin_unlock_irqrestore+0x14/0x20
[  444.088002] EAX: 00000286 EBX: f20d3800 ECX: 00000002 EDX: 00000286
[  444.088002] ESI: f50ba800 EDI: f2146848 EBP: f6269ec8 ESP: f6269ec8
[  444.088002]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[  444.088002] CR0: 8005003b CR2: 08f96600 CR3: 363ae000 CR4: 000006d0
[  444.088002] Stack:
[  444.088002]  f6269eec c066b0f7 00000286 f2146848 f50ba808 f50ba800 f50ba800 f2146a90
[  444.088002]  f2146848 f6269f08 f8f0a4ed f3141000 f2146800 f2146a90 f619fa00 00000040
[  444.088002]  f6269f40 c026cb25 00000001 166c6392 00000061 f6757140 f6136340 00000004
[  444.088002] Call Trace:
[  444.088002]  [] scsi_remove_target+0x167/0x1c0
[  444.088002]  [] fc_rport_final_delete+0x9d/0x1e0 [scsi_transport_fc]
[  444.088002]  [] process_one_work+0x155/0x3e0
[  444.088002]  [] worker_thread+0x37/0x490
[  444.088002]  [] kthread+0x9b/0xb0
[  444.088002]  [] ret_from_kernel_thread+0x21/0x40

What appears to be happening is that something has pinned the target
so it can't go into STARGET_DEL via final release and the loop in
scsi_remove_target spins endlessly until that happens.

The fix for this soft lockup is to not keep looping over a device that
we've called remove on but which hasn't gone into DEL state.  This
patch will retain a simplistic memory of the last target and not keep
looping over it.

Reported-by: Sebastian Herbszt 
Tested-by: Sebastian Herbszt 
Fixes: 40998193560dab6c3ce8d25f4fa58a23e252ef38
Signed-off-by: James Bottomley 
Signed-off-by: Luis Henriques

SCSI: Add Marvell Console to VPD blacklist

2016-02-25T10:34:39+00:00

commit 82c43310508eb19eb41fe7862e89afeb74030b84 upstream.

I have a Marvell 88SE9230 SATA Controller that has some sort of
integrated console SCSI device attached to one of the ports.

  ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
  ata14.00: configured for UDMA/66
  scsi 13:0:0:0: Processor         Marvell  Console 1.01 PQ: 0 ANSI: 5

Sending it VPD INQUIRY command seem to always fail with following error:

  ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
  ata14.00: irq_stat 0x40000001
  ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma 16640 in
            Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
  ata14: hard resetting link

This has been minor annoyance (only error printed on dmesg) until commit
09e2b0b14690 ("scsi: rescan VPD attributes") added call to scsi_attach_vpd()
in scsi_rescan_device(). The commit causes the system to splat out
following errors continuously without ever reaching the UI:

  ata14.00: configured for UDMA/66
  ata14: EH complete
  ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
  ata14.00: irq_stat 0x40000001
  ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 6 dma 16640 in
            Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
  ata14: hard resetting link
  ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  ata14.00: configured for UDMA/66
  ata14: EH complete
  ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
  ata14.00: irq_stat 0x40000001
  ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 7 dma 16640 in
            Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)

Without in-depth understanding of SCSI layer and the Marvell controller,
I suspect this happens because when the link goes down (because of an
error) we schedule scsi_rescan_device() which again fails to read VPD
data... ad infinitum.

Since VPD data cannot be read from the device anyway we prevent the SCSI
layer from even trying by blacklisting the device. This gets away the
error and the system starts up normally.

[mkp: Widened the match to all revisions of this device]

Signed-off-by: Mika Westerberg 
Reported-by: Kirill A. Shutemov 
Reported-by: Alexander Duyck 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Luis Henriques

scsi_dh_rdac: always retry MODE SELECT on command lock violation

2016-02-25T10:34:38+00:00

commit d2d06d4fe0f2cc2df9b17fefec96e6e1a1271d91 upstream.

If MODE SELECT returns with sense '05/91/36' (command lock violation)
it should always be retried without counting the number of retries.
During an HBA upgrade or similar circumstances one might see a flood
of MODE SELECT command from various HBAs, which will easily trigger
the sense code and exceed the retry count.

Signed-off-by: Hannes Reinecke 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Luis Henriques