linux-stable.git/drivers/scsi, branch v3.12.45

ipr: Increase default adapter init stage change timeout

2015-07-30T12:10:46+00:00

commit 45c44b5ff9caa743ed9c2bfd44307c536c9caf1e upstream.

Increase the default init stage change timeout from 15 seconds to 30 seconds.
This resolves issues we have seen with some adapters not transitioning
to the first init stage within 15 seconds, which results in adapter
initialization failures.

Signed-off-by: Brian King 
Signed-off-by: James Bottomley 
Signed-off-by: Jiri Slaby

lpfc: Add iotag memory barrier

2015-07-30T11:21:20+00:00

commit 27f344eb15dd0da80ebec80c7245e8c85043f841 upstream.

Add a memory barrier to ensure the valid bit is read before
any of the cqe payload is read. This fixes an issue seen
on Power where the cqe payload was getting loaded before
the valid bit. When this occurred, we saw an iotag out of
range error when a command completed, but since the iotag
looked invalid the command didn't get completed to scsi core.
Later we hit the command timeout, attempted to abort the command,
then waited for the aborted command to get returned. Since the
adapter already returned the command, we timeout waiting,
and end up escalating EEH all the way to host reset. This
patch fixes this issue.

Signed-off-by: Brian King 
Signed-off-by: James Smart 

 ---

 lpfc_sli.c |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
Signed-off-by: Christoph Hellwig 

Signed-off-by: Jiri Slaby

hpsa: fix a couple pci id table mistakes

2015-06-24T07:43:06+00:00

commit 7d2cce58a765e802959471f8a7edd83f113ad637 upstream.

Fix a couple of pci id table mistakes:
Subdevice ID 0x3323 missing from product[] table
	(another name for HP Smart Storage 1210m)
Bogus 0x1925 subdevice id removed from hpsa_pci_device_id[] (no such thing.)

Signed-off-by: Don Brace 
Reviewed-by: Webb Scales 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Jiri Slaby

sd: Disable support for 256 byte/sector disks

2015-06-03T09:33:14+00:00

commit 74856fbf441929918c49ff262ace9835048e4e6a upstream.

256 bytes per sector support has been broken since 2.6.X,
and no-one stepped up to fix this.
So disable support for it.

Signed-off-by: Mark Hounschell 
Signed-off-by: Hannes Reinecke 
Signed-off-by: James Bottomley 
Signed-off-by: Jiri Slaby

storvsc: Set the SRB flags correctly when no data transfer is needed

2015-06-02T09:46:49+00:00

commit dc45708ca9988656d706940df5fd102672c5de92 upstream.

Set the SRB flags correctly when there is no data transfer.  Without this
change some IHV drivers will fail valid commands such as TEST_UNIT_READY.

Cc: 
Signed-off-by: K. Y. Srinivasan 
Reviewed-by: Long Li 
Signed-off-by: James Bottomley 
Signed-off-by: Jiri Slaby

qla2xxx: remove redundant declaration in 'qla_gbl.h'

2015-05-26T14:27:02+00:00

commit 9493c2422cae272d6f1f567cbb424195defe4176 upstream.

Remove 2 redundant extern inline functions: qla8044_set_qsnt_ready() and
qla8044_need_reset_handler(). At present, within upstream next kernel
source code, they are only used within "drivers/scsi/qla2xxx/qla_nx2.c".

The related error and warnings (with allmodconfig under tile):

    CC [M]  drivers/scsi/qla2xxx/qla_nx2.o
  drivers/scsi/qla2xxx/qla_nx2.c:1633:1: error: static declaration of 'qla8044_need_reset_handler' follows non-static declaration
   qla8044_need_reset_handler(struct scsi_qla_host *vha)
   ^
  In file included from drivers/scsi/qla2xxx/qla_def.h:3706:0,
                   from drivers/scsi/qla2xxx/qla_nx2.c:11:
  drivers/scsi/qla2xxx/qla_gbl.h:756:20: note: previous declaration of 'qla8044_need_reset_handler' was here
   extern inline void qla8044_need_reset_handler(struct scsi_qla_host *vha);
                      ^
  drivers/scsi/qla2xxx/qla_gbl.h:756:20: warning: inline function 'qla8044_need_reset_handler' declared but never defined
  make[3]: *** [drivers/scsi/qla2xxx/qla_nx2.o] Error 1
  make[2]: *** [drivers/scsi/qla2xxx] Error 2
  make[1]: *** [drivers/scsi] Error 2
  make: *** [drivers] Error 2

    CC [M]  drivers/scsi/qla2xxx/qla_tmpl.o
  In file included from drivers/scsi/qla2xxx/qla_def.h:3706:0,
                   from drivers/scsi/qla2xxx/qla_tmpl.c:7:
  drivers/scsi/qla2xxx/qla_gbl.h:755:20: warning: inline function 'qla8044_set_qsnt_ready' declared but never defined
   extern inline void qla8044_set_qsnt_ready(struct scsi_qla_host *vha);
                    ^

Signed-off-by: Chen Gang 
Acked-by: Saurav Kashyap 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Jiri Slaby

hpsa: turn off interrupts when kdump starts

2015-05-26T12:33:44+00:00

commit 3b747298786355c6934b0892fc9ae4ca44105192 upstream.

Sometimes when the card is restarted it may cause -
"irq 16: nobody cared (try booting with the "irqpoll" option)"
that is likely caused so, that the card, after the hard reset
finishes, pulls on the irq. Disabling the ints before or after
the hpsa_kdump_hard_reset_controller fixes it.

At this point we can't know in which state the card is,
so using SA5_INTR_OFF + SA5_REPLY_INTR_MASK_OFFSET defines directly,
instead of the function the drivers provides, seems to be apropriate.

Reviewed-by: Scott Teel 
Signed-off-by: Don Brace 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Jiri Slaby

hpsa: add missing pci_set_master in kdump path

2015-05-26T12:33:43+00:00

commit 859c75aba20264d87dd026bab0d0ca3bff385955 upstream.

Add a call to pci_set_master(...)  missing in the previous
patch "hpsa: refine the pci enable/disable handling".
Found thanks to Rob Elliot.

Signed-off-by: Tomas Henzl 
Reviewed-by: Robert Elliott 
Tested-by: Robert Elliott 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Jiri Slaby

hpsa: refine the pci enable/disable handling

2015-05-26T12:33:43+00:00

commit 132aa220b45d60e9b20def1e9d8be9422eed9616 upstream.

When a second(kdump) kernel starts and the hard reset method is used
the driver calls pci_disable_device without previously enabling it,
so the kernel shows a warning -
[   16.876248] WARNING: at drivers/pci/pci.c:1431 pci_disable_device+0x84/0x90()
[   16.882686] Device hpsa
disabling already-disabled device
...
This patch fixes it, in addition to this I tried to balance also some other pairs
of enable/disable device in the driver.
Unfortunately I wasn't able to verify the functionality for the case of a sw reset,
because of a lack of proper hw.

Signed-off-by: Tomas Henzl 
Reviewed-by: Stephen M. Cameron 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Jiri Slaby

3w-sas: fix command completion race

2015-05-15T07:10:51+00:00

commit 579d69bc1fd56d5af5761969aa529d1d1c188300 upstream.

The 3w-sas driver needs to tear down the dma mappings before returning
the command to the midlayer, as there is no guarantee the sglist and
count are valid after that point.  Also remove the dma mapping helpers
which have another inherent race due to the request_id index.

Signed-off-by: Christoph Hellwig 
Reported-by: Torsten Luettgert 
Tested-by: Bernd Kardatzki 
Acked-by: Adam Radford 
Signed-off-by: James Bottomley 
Signed-off-by: Jiri Slaby