linux-stable.git/drivers/scsi, branch linux-5.14.y

scsi: qla2xxx: Turn off target reset during issue_lip

2021-11-17T10:04:36+00:00

[ Upstream commit 0b7a9fd934a68ebfc1019811b7bdc1742072ad7b ]

When user uses issue_lip to do link bounce, driver sends additional target
reset to remote device before resetting the link. The target reset would
affect other paths with active I/Os. This patch will remove the unnecessary
target reset.

Link: https://lore.kernel.org/r/20211026115412.27691-4-njavali@marvell.com
Fixes: 5854771e314e ("[SCSI] qla2xxx: Add ISPFX00 specific bus reset routine")
Reviewed-by: Himanshu Madhani 
Signed-off-by: Quinn Tran 
Signed-off-by: Nilesh Javali 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: qla2xxx: Fix gnl list corruption

2021-11-17T10:04:36+00:00

[ Upstream commit c98c5daaa24b583cba1369b7d167f93c6ae7299c ]

Current code does list element deletion and addition in and out of lock
protection. This patch moves deletion behind lock.

list_add double add: new=ffff9130b5eb89f8, prev=ffff9130b5eb89f8,
    next=ffff9130c6a715f0.
 ------------[ cut here ]------------
 kernel BUG at lib/list_debug.c:31!
 invalid opcode: 0000 [#1] SMP PTI
 CPU: 1 PID: 182395 Comm: kworker/1:37 Kdump: loaded Tainted: G W  OE
 --------- -  - 4.18.0-193.el8.x86_64 #1
 Hardware name: HP ProLiant DL160 Gen8, BIOS J03 02/10/2014
 Workqueue: qla2xxx_wq qla2x00_iocb_work_fn [qla2xxx]
 RIP: 0010:__list_add_valid+0x41/0x50
 Code: 85 94 00 00 00 48 39 c7 74 0b 48 39 d7 74 06 b8 01 00 00 00 c3 48 89 f2
 4c 89 c1 48 89 fe 48 c7 c7 60 83 ad 97 e8 4d bd ce ff <0f> 0b 0f 1f 00 66 2e
 0f 1f 84 00 00 00 00 00 48 8b 07 48 8b 57 08
 RSP: 0018:ffffaba306f47d68 EFLAGS: 00010046
 RAX: 0000000000000058 RBX: ffff9130b5eb8800 RCX: 0000000000000006
 RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff9130b7456a00
 RBP: ffff9130c6a70a58 R08: 000000000008d7be R09: 0000000000000001
 R10: 0000000000000000 R11: 0000000000000001 R12: ffff9130c6a715f0
 R13: ffff9130b5eb8824 R14: ffff9130b5eb89f8 R15: ffff9130b5eb89f8
 FS:  0000000000000000(0000) GS:ffff9130b7440000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007efcaaef11a0 CR3: 000000005200a002 CR4: 00000000000606e0
 Call Trace:
  qla24xx_async_gnl+0x113/0x3c0 [qla2xxx]
  ? qla2x00_iocb_work_fn+0x53/0x80 [qla2xxx]
  ? process_one_work+0x1a7/0x3b0
  ? worker_thread+0x30/0x390
  ? create_worker+0x1a0/0x1a0
  ? kthread+0x112/0x130

Link: https://lore.kernel.org/r/20211026115412.27691-3-njavali@marvell.com
Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery")
Reviewed-by: Himanshu Madhani 
Signed-off-by: Quinn Tran 
Signed-off-by: Nilesh Javali 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset

2021-11-17T10:04:27+00:00

[ Upstream commit d305c253af693e69a36cedec880aca6d0c6d789d ]

A prior patch introduced HBA_NEEDS_CFG_PORT flag logic, but in
lpfc_sli_brdrestart_s3() code path, right after HBA_NEEDS_CFG_PORT is set,
the phba->hba_flag is cleared in lpfc_sli_brdreset().

Fix by calling lpfc_sli_chipset_init() to wait for successful restart of
the HBA in lpfc_host_reset_handler() after lpfc_sli_brdrestart().

lpfc_sli_chipset_init() sets the HBA_NEEDS_CFG_PORT flag so that the
lpfc_sli_hba_setup() routine from lpfc_online() will execute
lpfc_sli_config_port() initialization step when the brdrestart is
successful.

Link: https://lore.kernel.org/r/20211020211417.88754-3-jsmart2021@gmail.com
Fixes: d2f2547efd39 ("scsi: lpfc: Fix auto sli_mode and its effect on CONFIG_PORT for SLI3")
Co-developed-by: Justin Tee 
Signed-off-by: Justin Tee 
Signed-off-by: James Smart 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer

2021-11-17T10:04:27+00:00

[ Upstream commit b6ca770ae7f2c560a29bbd02c4e3d734fafaf804 ]

UFS drivers that probe defer will end up leaking memory allocated for clk
and regulator names via kstrdup() because the structure that is holding
this memory is allocated via devm_* variants which will be freed during
probe defer but the names are never freed.

Use same devm_* variant of kstrdup to free the memory allocated to name
when driver probe defers.

Kmemleak found around 11 leaks on Qualcomm Dragon Board RB5:

unreferenced object 0xffff66f243fb2c00 (size 128):
  comm "kworker/u16:0", pid 7, jiffies 4294893319 (age 94.848s)
  hex dump (first 32 bytes):
    63 6f 72 65 5f 63 6c 6b 00 76 69 72 74 75 61 6c  core_clk.virtual
    2f 77 6f 72 6b 71 75 65 75 65 2f 73 63 73 69 5f  /workqueue/scsi_
  backtrace:
    [<000000006f788cd1>] slab_post_alloc_hook+0x88/0x410
    [<00000000cfd1372b>] __kmalloc_track_caller+0x138/0x230
    [<00000000a92ab17b>] kstrdup+0xb0/0x110
    [<0000000037263ab6>] ufshcd_pltfrm_init+0x1a8/0x500
    [<00000000a20a5caa>] ufs_qcom_probe+0x20/0x58
    [<00000000a5e43067>] platform_probe+0x6c/0x118
    [<00000000ef686e3f>] really_probe+0xc4/0x330
    [<000000005b18792c>] __driver_probe_device+0x88/0x118
    [<00000000a5d295e8>] driver_probe_device+0x44/0x158
    [<000000007e83f58d>] __device_attach_driver+0xb4/0x128
    [<000000004bfa4470>] bus_for_each_drv+0x68/0xd0
    [<00000000b89a83bc>] __device_attach+0xec/0x170
    [<00000000ada2beea>] device_initial_probe+0x14/0x20
    [<0000000079921612>] bus_probe_device+0x9c/0xa8
    [<00000000d268bf7c>] deferred_probe_work_func+0x90/0xd0
    [<000000009ef64bfa>] process_one_work+0x29c/0x788
unreferenced object 0xffff66f243fb2c80 (size 128):
  comm "kworker/u16:0", pid 7, jiffies 4294893319 (age 94.848s)
  hex dump (first 32 bytes):
    62 75 73 5f 61 67 67 72 5f 63 6c 6b 00 00 00 00  bus_aggr_clk....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................

With this patch no memory leaks are reported.

Link: https://lore.kernel.org/r/20210914092214.6468-1-srinivas.kandagatla@linaro.org
Fixes: aa4976130934 ("ufs: Add regulator enable support")
Fixes: c6e79dacd86f ("ufs: Add clock initialization support")
Reviewed-by: Bart Van Assche 
Signed-off-by: Srinivas Kandagatla 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: csiostor: Uninitialized data in csio_ln_vnp_read_cbfn()

2021-11-17T10:04:25+00:00

[ Upstream commit f4875d509a0a78ad294a1a538d534b5ba94e685a ]

This variable is just a temporary variable, used to do an endian
conversion.  The problem is that the last byte is not initialized.  After
the conversion is completely done, the last byte is discarded so it doesn't
cause a problem.  But static checkers and the KMSan runtime checker can
detect the uninitialized read and will complain about it.

Link: https://lore.kernel.org/r/20211006073242.GA8404@kili
Fixes: 5036f0a0ecd3 ("[SCSI] csiostor: Fix sparse warnings.")
Signed-off-by: Dan Carpenter 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: pm80xx: Fix misleading log statement in pm8001_mpi_get_nvmd_resp()

2021-11-17T10:04:23+00:00

[ Upstream commit 4084a7235d38311a77c86ba69ba849bd787db87b ]

pm8001_mpi_get_nvmd_resp() handles a GET_NVMD_DATA response, not a
SET_NVMD_DATA response, as the log statement implies.

Fixes: 1f889b58716a ("scsi: pm80xx: Fix pm8001_mpi_get_nvmd_resp() race condition")
Link: https://lore.kernel.org/r/20210929025847.646999-1-ipylypiv@google.com
Reviewed-by: Changyuan Lyu 
Acked-by: Jack Wang 
Signed-off-by: Igor Pylypiv 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: megaraid_sas: Fix concurrent access to ISR between IRQ polling and real interrupt

2021-11-17T10:04:23+00:00

[ Upstream commit e7dcc514a49e74051b869697d5ab0370f6301d57 ]

IRQ polling thread calls ISR after enable_irq() to handle any missed I/O
completion. The atomic flag "in_used" was added to have the synchronization
between the IRQ polling thread and the interrupt context. There is a bug
around it leading to a race condition.

Below is the sequence:

 - IRQ polling thread accesses ISR, fetches the reply descriptor.

 - Real interrupt arrives and pre-empts polling thread (enable_irq() is
   already called).

 - Interrupt context picks the same reply descriptor as fetched by polling
   thread, processes it, and exits.

 - Polling thread resumes and processes the descriptor which is already
   processed by interrupt thread leads to kernel crash.

Setting the "in_used" flag before fetching the reply descriptor ensures
synchronized access to ISR.

Link: https://www.spinics.net/lists/linux-scsi/msg159440.html
Link: https://lore.kernel.org/r/20210929124022.24605-2-sumit.saxena@broadcom.com
Fixes: 9bedd36e9146 ("scsi: megaraid_sas: Handle missing interrupts while re-enabling IRQs")
Signed-off-by: Sumit Saxena 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: dc395: Fix error case unwinding

2021-11-17T10:04:22+00:00

[ Upstream commit cbd9a3347c757383f3d2b50cf7cfd03eb479c481 ]

dc395x_init_one()->adapter_init() might fail. In this case, the acb is
already cleaned up by adapter_init(), no need to do that in
adapter_uninit(acb) again.

[    1.252251] dc395x: adapter init failed
[    1.254900] RIP: 0010:adapter_uninit+0x94/0x170 [dc395x]
[    1.260307] Call Trace:
[    1.260442]  dc395x_init_one.cold+0x72a/0x9bb [dc395x]

Link: https://lore.kernel.org/r/20210907040702.1846409-1-ztong0001@gmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Finn Thain 
Signed-off-by: Tong Zhang 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: pm80xx: Fix lockup in outbound queue management

2021-11-17T10:04:20+00:00

[ Upstream commit b27a40534ef76a22628a5c12f98ea489823a8ba5 ]

Commit 1f02beff224e ("scsi: pm80xx: Remove global lock from outbound queue
processing") introduced a lock per outbound queue. Prior to that change the
driver was using a global lock for all outbound queues.

While processing the I/O responses and events the driver takes the outbound
queue spinlock and is supposed to release it in pm8001_ccb_task_free_done()
before calling command done(). Since the older code was using a global
lock, pm8001_ccb_task_free_done() was releasing the global spin lock. The
change that split the lock per outbound queue did not consider this and
pm8001_ccb_task_free_done() was still releasing the global lock.

Link: https://lore.kernel.org/r/20210906170404.5682-3-Ajish.Koshy@microchip.com
Fixes: 1f02beff224e ("scsi: pm80xx: Remove global lock from outbound queue processing")
Acked-by: Jack Wang 
Signed-off-by: Ajish Koshy 
Signed-off-by: Viswas G 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

qed: Don't ignore devlink allocation failures

2021-11-17T10:03:59+00:00

[ Upstream commit e6a54d6f221301347aaf9d83bb1f23129325c1c5 ]

devlink is a software interface that doesn't depend on any hardware
capabilities. The failure in SW means memory issues, wrong parameters,
programmer error e.t.c.

Like any other such interface in the kernel, the returned status of
devlink APIs should be checked and propagated further and not ignored.

Fixes: 755f982bb1ff ("qed/qede: make devlink survive recovery")
Signed-off-by: Leon Romanovsky 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin