linux-stable.git/drivers/scsi, branch linux-3.18.y

scsi: qla2xxx: Fix incorrect region-size setting in optrom SYSFS routines

2019-05-16T07:17:21+00:00

commit 5cbdae10bf11f96e30b4d14de7b08c8b490e903c upstream.

Commit e6f77540c067 ("scsi: qla2xxx: Fix an integer overflow in sysfs
code") incorrectly set 'optrom_region_size' to 'start+size', which can
overflow option-rom boundaries when 'start' is non-zero.  Continue setting
optrom_region_size to the proper adjusted value of 'size'.

Fixes: e6f77540c067 ("scsi: qla2xxx: Fix an integer overflow in sysfs code")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Vasquez 
Signed-off-by: Himanshu Madhani 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: csiostor: fix missing data copy in csio_scsi_err_handler()

2019-05-16T07:17:21+00:00

[ Upstream commit 5c2442fd78998af60e13aba506d103f7f43f8701 ]

If scsi cmd sglist is not suitable for DDP then csiostor driver uses
preallocated buffers for DDP, because of this data copy is required from
DDP buffer to scsi cmd sglist before calling ->scsi_done().

Signed-off-by: Varun Prakash 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: libsas: fix a race condition when smp task timeout

2019-05-16T07:17:20+00:00

commit b90cd6f2b905905fb42671009dc0e27c310a16ae upstream.

When the lldd is processing the complete sas task in interrupt and set the
task stat as SAS_TASK_STATE_DONE, the smp timeout timer is able to be
triggered at the same time. And smp_task_timedout() will complete the task
wheter the SAS_TASK_STATE_DONE is set or not. Then the sas task may freed
before lldd end the interrupt process. Thus a use-after-free will happen.

Fix this by calling the complete() only when SAS_TASK_STATE_DONE is not
set. And remove the check of the return value of the del_timer(). Once the
LLDD sets DONE, it must call task->done(), which will call
smp_task_done()->complete() and the task will be completed and freed
correctly.

Reported-by: chenxiang 
Signed-off-by: Jason Yan 
CC: John Garry 
CC: Johannes Thumshirn 
CC: Ewan Milne 
CC: Christoph Hellwig 
CC: Tomas Henzl 
CC: Dan Williams 
CC: Hannes Reinecke 
Reviewed-by: Hannes Reinecke 
Reviewed-by: John Garry 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Martin K. Petersen 
Cc: Guenter Roeck

scsi: storvsc: Fix calculation of sub-channel count

2019-05-16T07:17:19+00:00

[ Upstream commit 382e06d11e075a40b4094b6ef809f8d4bcc7ab2a ]

When the number of sub-channels offered by Hyper-V is >= the number of CPUs
in the VM, calculate the correct number of sub-channels.  The current code
produces one too many.

This scenario arises only when the number of CPUs is artificially
restricted (for example, with maxcpus= on the kernel boot line), because
Hyper-V normally offers a sub-channel count < number of CPUs.  While the
current code doesn't break, the extra sub-channel is unbalanced across the
CPUs (for example, a total of 5 channels on a VM with 4 CPUs).

Signed-off-by: Michael Kelley 
Reviewed-by: Vitaly Kuznetsov 
Reviewed-by: Long Li 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: qla4xxx: fix a potential NULL pointer dereference

2019-05-16T07:17:16+00:00

[ Upstream commit fba1bdd2a9a93f3e2181ec1936a3c2f6b37e7ed6 ]

In case iscsi_lookup_endpoint fails, the fix returns -EINVAL to avoid NULL
pointer dereference.

Signed-off-by: Kangjie Lu 
Acked-by: Manish Rangankar 
Reviewed-by: Mukesh Ojha 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin (Microsoft)

scsi: megaraid_sas: return error when create DMA pool failed

2019-04-27T07:30:22+00:00

[ Upstream commit bcf3b67d16a4c8ffae0aa79de5853435e683945c ]

when create DMA pool for cmd frames failed, we should return -ENOMEM,
instead of 0.
In some case in:

    megasas_init_adapter_fusion()

    -->megasas_alloc_cmds()
       -->megasas_create_frame_pool
          create DMA pool failed,
        --> megasas_free_cmds() [1]

    -->megasas_alloc_cmds_fusion()
       failed, then goto fail_alloc_cmds.
    -->megasas_free_cmds() [2]

we will call megasas_free_cmds twice, [1] will kfree cmd_list,
[2] will use cmd_list.it will cause a problem:

Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd = ffffffc000f70000
[00000000] *pgd=0000001fbf893003, *pud=0000001fbf893003,
*pmd=0000001fbf894003, *pte=006000006d000707
Internal error: Oops: 96000005 [#1] SMP
 Modules linked in:
 CPU: 18 PID: 1 Comm: swapper/0 Not tainted
 task: ffffffdfb9290000 ti: ffffffdfb923c000 task.ti: ffffffdfb923c000
 PC is at megasas_free_cmds+0x30/0x70
 LR is at megasas_free_cmds+0x24/0x70
 ...
 Call trace:
 [] megasas_free_cmds+0x30/0x70
 [] megasas_init_adapter_fusion+0x2f4/0x4d8
 [] megasas_init_fw+0x2dc/0x760
 [] megasas_probe_one+0x3c0/0xcd8
 [] local_pci_probe+0x4c/0xb4
 [] pci_device_probe+0x11c/0x14c
 [] driver_probe_device+0x1ec/0x430
 [] __driver_attach+0xa8/0xb0
 [] bus_for_each_dev+0x74/0xc8
  [] driver_attach+0x28/0x34
 [] bus_add_driver+0x16c/0x248
 [] driver_register+0x6c/0x138
 [] __pci_register_driver+0x5c/0x6c
 [] megasas_init+0xc0/0x1a8
 [] do_one_initcall+0xe8/0x1ec
 [] kernel_init_freeable+0x1c8/0x284
 [] kernel_init+0x1c/0xe4

Signed-off-by: Jason Yan 
Acked-by: Sumit Saxena 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c

2019-04-27T07:30:21+00:00

[ Upstream commit 1749ef00f7312679f76d5e9104c5d1e22a829038 ]

We had a test-report where, under memory pressure, adding LUNs to the
systems would fail (the tests add LUNs strictly in sequence):

[ 5525.853432] scsi 0:0:1:1088045124: Direct-Access     IBM      2107900          .148 PQ: 0 ANSI: 5
[ 5525.853826] scsi 0:0:1:1088045124: alua: supports implicit TPGS
[ 5525.853830] scsi 0:0:1:1088045124: alua: device naa.6005076303ffd32700000000000044da port group 0 rel port 43
[ 5525.853931] sd 0:0:1:1088045124: Attached scsi generic sg10 type 0
[ 5525.854075] sd 0:0:1:1088045124: [sdk] Disabling DIF Type 1 protection
[ 5525.855495] sd 0:0:1:1088045124: [sdk] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB)
[ 5525.855606] sd 0:0:1:1088045124: [sdk] Write Protect is off
[ 5525.855609] sd 0:0:1:1088045124: [sdk] Mode Sense: ed 00 00 08
[ 5525.855795] sd 0:0:1:1088045124: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5525.857838]  sdk: sdk1
[ 5525.859468] sd 0:0:1:1088045124: [sdk] Attached SCSI disk
[ 5525.865073] sd 0:0:1:1088045124: alua: transition timeout set to 60 seconds
[ 5525.865078] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA
[ 5526.015070] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA
[ 5526.015213] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA
[ 5526.587439] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
[ 5526.588562] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured

Looking at the code of scsi_alloc_sdev(), and all the calling contexts,
there seems to be no reason to use GFP_ATMOIC here. All the different
call-contexts use a mutex at some point, and nothing in between that
requires no sleeping, as far as I could see. Additionally, the code that
later allocates the block queue for the device (scsi_mq_alloc_queue())
already uses GFP_KERNEL.

There are similar allocations in two other functions:
scsi_probe_and_add_lun(), and scsi_add_lun(),; that can also be done with
GFP_KERNEL.

Here is the contexts for the three functions so far:

    scsi_alloc_sdev()
        scsi_probe_and_add_lun()
            scsi_sequential_lun_scan()
                __scsi_scan_target()
                    scsi_scan_target()
                        mutex_lock()
                    scsi_scan_channel()
                        scsi_scan_host_selected()
                            mutex_lock()
            scsi_report_lun_scan()
                __scsi_scan_target()
    	            ...
            __scsi_add_device()
                mutex_lock()
            __scsi_scan_target()
                ...
        scsi_report_lun_scan()
            ...
        scsi_get_host_dev()
            mutex_lock()

    scsi_probe_and_add_lun()
        ...

    scsi_add_lun()
        scsi_probe_and_add_lun()
            ...

So replace all these, and give them a bit of a better chance to succeed,
with more chances of reclaim.

Signed-off-by: Benjamin Block 
Reviewed-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: virtio_scsi: don't send sc payload with tmfs

2019-03-23T07:19:01+00:00

commit 3722e6a52174d7c3a00e6f5efd006ca093f346c1 upstream.

The virtio scsi spec defines struct virtio_scsi_ctrl_tmf as a set of
device-readable records and a single device-writable response entry:

    struct virtio_scsi_ctrl_tmf
    {
        // Device-readable part
        le32 type;
        le32 subtype;
        u8 lun[8];
        le64 id;
        // Device-writable part
        u8 response;
    }

The above should be organised as two descriptor entries (or potentially
more if using VIRTIO_F_ANY_LAYOUT), but without any extra data after "le64
id" or after "u8 response".

The Linux driver doesn't respect that, with virtscsi_abort() and
virtscsi_device_reset() setting cmd->sc before calling virtscsi_tmf().  It
results in the original scsi command payload (or writable buffers) added to
the tmf.

This fixes the problem by leaving cmd->sc zeroed out, which makes
virtscsi_kick_cmd() add the tmf to the control vq without any payload.

Cc: stable@vger.kernel.org
Signed-off-by: Felipe Franciosi 
Reviewed-by: Paolo Bonzini 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task

2019-03-23T07:19:00+00:00

[ Upstream commit 79edd00dc6a96644d76b4a1cb97d94d49e026768 ]

When a target sends Check Condition, whilst initiator is busy xmiting
re-queued data, could lead to race between iscsi_complete_task() and
iscsi_xmit_task() and eventually crashing with the following kernel
backtrace.

[3326150.987523] ALERT: BUG: unable to handle kernel NULL pointer dereference at 0000000000000078
[3326150.987549] ALERT: IP: [] iscsi_xmit_task+0x2d/0xc0 [libiscsi]
[3326150.987571] WARN: PGD 569c8067 PUD 569c9067 PMD 0
[3326150.987582] WARN: Oops: 0002 [#1] SMP
[3326150.987593] WARN: Modules linked in: tun nfsv3 nfs fscache dm_round_robin
[3326150.987762] WARN: CPU: 2 PID: 8399 Comm: kworker/u32:1 Tainted: G O 4.4.0+2 #1
[3326150.987774] WARN: Hardware name: Dell Inc. PowerEdge R720/0W7JN5, BIOS 2.5.4 01/22/2016
[3326150.987790] WARN: Workqueue: iscsi_q_13 iscsi_xmitworker [libiscsi]
[3326150.987799] WARN: task: ffff8801d50f3800 ti: ffff8801f5458000 task.ti: ffff8801f5458000
[3326150.987810] WARN: RIP: e030:[] [] iscsi_xmit_task+0x2d/0xc0 [libiscsi]
[3326150.987825] WARN: RSP: e02b:ffff8801f545bdb0 EFLAGS: 00010246
[3326150.987831] WARN: RAX: 00000000ffffffc3 RBX: ffff880282d2ab20 RCX: ffff88026b6ac480
[3326150.987842] WARN: RDX: 0000000000000000 RSI: 00000000fffffe01 RDI: ffff880282d2ab20
[3326150.987852] WARN: RBP: ffff8801f545bdc8 R08: 0000000000000000 R09: 0000000000000008
[3326150.987862] WARN: R10: 0000000000000000 R11: 000000000000fe88 R12: 0000000000000000
[3326150.987872] WARN: R13: ffff880282d2abe8 R14: ffff880282d2abd8 R15: ffff880282d2ac08
[3326150.987890] WARN: FS: 00007f5a866b4840(0000) GS:ffff88028a640000(0000) knlGS:0000000000000000
[3326150.987900] WARN: CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[3326150.987907] WARN: CR2: 0000000000000078 CR3: 0000000070244000 CR4: 0000000000042660
[3326150.987918] WARN: Stack:
[3326150.987924] WARN: ffff880282d2ad58 ffff880282d2ab20 ffff880282d2abe8 ffff8801f545be18
[3326150.987938] WARN: ffffffffa05cea90 ffff880282d2abf8 ffff88026b59cc80 ffff88026b59cc00
[3326150.987951] WARN: ffff88022acf32c0 ffff880289491800 ffff880255a80800 0000000000000400
[3326150.987964] WARN: Call Trace:
[3326150.987975] WARN: [] iscsi_xmitworker+0x2f0/0x360 [libiscsi]
[3326150.987988] WARN: [] process_one_work+0x1fc/0x3b0
[3326150.987997] WARN: [] worker_thread+0x2a5/0x470
[3326150.988006] WARN: [] ? __schedule+0x648/0x870
[3326150.988015] WARN: [] ? rescuer_thread+0x300/0x300
[3326150.988023] WARN: [] kthread+0xd5/0xe0
[3326150.988031] WARN: [] ? kthread_stop+0x110/0x110
[3326150.988040] WARN: [] ret_from_fork+0x3f/0x70
[3326150.988048] WARN: [] ? kthread_stop+0x110/0x110
[3326150.988127] ALERT: RIP [] iscsi_xmit_task+0x2d/0xc0 [libiscsi]
[3326150.988138] WARN: RSP 
[3326150.988144] WARN: CR2: 0000000000000078
[3326151.020366] WARN: ---[ end trace 1c60974d4678d81b ]---

Commit 6f8830f5bbab ("scsi: libiscsi: add lock around task lists to fix
list corruption regression") introduced "taskqueuelock" to fix list
corruption during the race, but this wasn't enough.

Re-setting of conn->task to NULL, could race with iscsi_xmit_task().
iscsi_complete_task()
{
    ....
    if (conn->task == task)
        conn->task = NULL;
}

conn->task in iscsi_xmit_task() could be NULL and so will be task.
__iscsi_get_task(task) will crash (NullPtr de-ref), trying to access
refcount.

iscsi_xmit_task()
{
    struct iscsi_task *task = conn->task;

    __iscsi_get_task(task);
}

This commit will take extra conn->session->back_lock in iscsi_xmit_task()
to ensure iscsi_xmit_task() waits for iscsi_complete_task(), if
iscsi_complete_task() wins the race.  If iscsi_xmit_task() wins the race,
iscsi_xmit_task() increments task->refcount
(__iscsi_get_task) ensuring iscsi_complete_task() will not iscsi_free_task().

Signed-off-by: Anoob Soman 
Signed-off-by: Bob Liu 
Acked-by: Lee Duncan 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: libfc: free skb when receiving invalid flogi resp

2019-03-23T07:18:56+00:00

[ Upstream commit 5d8fc4a9f0eec20b6c07895022a6bea3fb6dfb38 ]

The issue to be fixed in this commit is when libfc found it received a
invalid FLOGI response from FC switch, it would return without freeing the
fc frame, which is just the skb data. This would cause memory leak if FC
switch keeps sending invalid FLOGI responses.

This fix is just to make it execute `fc_frame_free(fp)` before returning
from function `fc_lport_flogi_resp`.

Signed-off-by: Ming Lu 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin