linux-stable.git/drivers/scsi/lpfc, branch linux-3.18.y

scsi: lpfc: Correct soft lockup when running mds diagnostics

2018-11-22T06:32:43+00:00

[ Upstream commit 0ef01a2d95fd62bb4f536e7ce4d5e8e74b97a244 ]

When running an mds diagnostic that passes frames with the switch, soft
lockups are detected. The driver is in a CQE processing loop and has
sufficient amount of traffic that it never exits the ring processing routine,
thus the "lockup".

Cap the number of elements in the work processing routine to 64 elements. This
ensures that the cpu will be given up and the handler reschedule to process
additional items.

Signed-off-by: Dick Kennedy 
Signed-off-by: James Smart 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix frequency of Release WQE CQEs

2018-05-30T05:47:45+00:00

[ Upstream commit 04673e38f56b30cd39b1fa0f386137d818b17781 ]

The driver controls when the hardware sends completions that communicate
consumption of elements from the WQ. This is done by setting a WQEC bit
on a WQE.

The current driver sets it on every Nth WQE posting. However, the driver
isn't clearing the bit if the WQE is reused. Thus, if the queue depth
isn't evenly divisible by N, with enough time, it can be set on every
element, creating a lot of overhead and risking CQ full conditions.

Correct by clearing the bit when not setting it on an Nth element.

Signed-off-by: Dick Kennedy 
Signed-off-by: James Smart 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix soft lockup in lpfc worker thread during LIP testing

2018-05-30T05:47:45+00:00

[ Upstream commit 161df4f09987ae2e9f0f97f0b38eee298b4a39ff ]

During link bounce testing in a point-to-point topology, the host may
enter a soft lockup on the lpfc_worker thread:

    Call Trace:
     lpfc_work_done+0x1f3/0x1390 [lpfc]
     lpfc_do_work+0x16f/0x180 [lpfc]
     kthread+0xc7/0xe0
     ret_from_fork+0x3f/0x70

The driver was simultaneously setting a combination of flags that caused
lpfc_do_work()to effectively spin between slow path work and new event
data, causing the lockup.

Ensure in the typical wq completions, that new event data flags are set
if the slow path flag is running. The slow path will eventually
reschedule the wq handling.

Signed-off-by: Dick Kennedy 
Signed-off-by: James Smart 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix issue_lip if link is disabled

2018-05-30T05:47:44+00:00

[ Upstream commit 2289e9598dde9705400559ca2606fb8c145c34f0 ]

The driver ignored checks on whether the link should be kept
administratively down after a link bounce. Correct the checks.

Signed-off-by: Dick Kennedy 
Signed-off-by: James Smart 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Fix driver usage of 128B WQEs when WQ_CREATE is V1.

2018-03-24T09:57:33+00:00

[ Upstream commit 3f247de750b8dd8f50a2c1390e2a1238790a9dff ]

There are two versions of a structure for queue creation and setup that the
driver shares with FW. The driver was only treating as version 0.

Verify WQ_CREATE with 128B WQEs in V0 and V1.

Code review of another bug showed the driver passing
128B WQEs and 8 pages in WQ CREATE and V0.
Code inspection/instrumentation showed that the driver
uses V0 in WQ_CREATE and if the caller passes queue->entry_size
128B, the driver sets the hdr_version to V1 so all is good.
When I tested the V1 WQ_CREATE, the mailbox failed causing
the driver to unload.

Signed-off-by: Dick Kennedy 
Signed-off-by: James Smart 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: PLOGI failures during NPIV testing

2017-12-25T13:20:09+00:00

[ Upstream commit e8bcf0ae4c0346fdc78ebefe0eefcaa6a6622d38 ]

Local Reject/Invalid RPI errors seen during discovery.

Temporary RPI cleanup was occurring regardless of SLI rev. It's only
necessary on SLI-4.

Adjust the test for whether cleanup is necessary.

Signed-off-by: Dick Kennedy 
Signed-off-by: James Smart 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix secure firmware updates

2017-12-25T13:20:09+00:00

[ Upstream commit 184fc2b9a8bcbda9c14d0a1e7fbecfc028c7702e ]

Firmware update fails with: status x17 add_status x56 on the final write

If multiple DMA buffers are used for the download, some firmware revs
have difficulty with signatures and crcs split across the dma buffer
boundaries.  Resolve by making all writes be a single 4k page in length.

Signed-off-by: Dick Kennedy 
Signed-off-by: James Smart 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix PT2PT PRLI reject

2017-12-25T13:20:07+00:00

[ Upstream commit a71e3cdcfce4880a4578915e110e3eaed1659765 ]

lpfc cannot establish connection with targets that send PRLI in P2P
configurations.

If lpfc rejects a PRLI that is sent from a target the target will not
resend and will reject the PRLI send from the initiator.

[mkp: applied by hand]

Signed-off-by: Dick Kennedy 
Signed-off-by: James Smart 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adapters

2017-12-16T09:32:28+00:00

[ Upstream commit 5d181531bc6169e19a02a27d202cf0e982db9d0e ]

if REG_VPI fails, the driver was incorrectly issuing INIT_VFI
(a SLI4 command) on a SLI3 adapter.

Signed-off-by: Dick Kennedy 
Signed-off-by: James Smart 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Correct issue leading to oops during link reset

2017-11-21T08:01:06+00:00

[ Upstream commit e6c6acc0e0223ddaf867628d420ee196349c6fae ]

Correct issue leading to oops during link reset. Missing vport pointer.

[mkp: fixed typo]

Signed-off-by: Dick Kennedy 
Signed-off-by: James Smart 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman