Pull block fixes from Jens Axboe:
 "A few fixes that should go into this release. This contains:

   - Fix for a corruption issue with the s390 dasd driver (Stefan)

   - Fixup/improvement for the flush insertion change that we had in
     this series (Ming)

   - Fix for the partition suppor for host aware zoned devices
     (Shin'ichiro)

   - Fix incorrect blk-iocost comparison (Tejun)

  The diffstat looks large, but that's a) mostly dasd, and b) the flush
  fix from Ming adds a big comment"

* tag 'block-5.6-2020-03-13' of git://git.kernel.dk/linux-block:
  block: Fix partition support for host aware zoned block devices
  blk-mq: insert flush request to the front of dispatch queue
  s390/dasd: fix data corruption for thin provisioned devices
  blk-iocost: fix incorrect vtime comparison in iocg_is_idle()

Pull networking fixes from David Miller:
 "It looks like a decent sized set of fixes, but a lot of these are one
  liner off-by-one and similar type changes:

   1) Fix netlink header pointer to calcular bad attribute offset
      reported to user. From Pablo Neira Ayuso.

   2) Don't double clear PHY interrupts when ->did_interrupt is set,
      from Heiner Kallweit.

   3) Add missing validation of various (devlink, nl802154, fib, etc.)
      attributes, from Jakub Kicinski.

   4) Missing *pos increments in various netfilter seq_next ops, from
      Vasily Averin.

   5) Missing break in of_mdiobus_register() loop, from Dajun Jin.

   6) Don't double bump tx_dropped in veth driver, from Jiang Lidong.

   7) Work around FMAN erratum A050385, from Madalin Bucur.

   8) Make sure ARP header is pulled early enough in bonding driver,
      from Eric Dumazet.

   9) Do a cond_resched() during multicast processing of ipvlan and
      macvlan, from Mahesh Bandewar.

  10) Don't attach cgroups to unrelated sockets when in interrupt
      context, from Shakeel Butt.

  11) Fix tpacket ring state management when encountering unknown GSO
      types. From Willem de Bruijn.

  12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend()
      only in the suspend context. From Heiner Kallweit"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
  net: systemport: fix index check to avoid an array out of bounds access
  tc-testing: add ETS scheduler to tdc build configuration
  net: phy: fix MDIO bus PM PHY resuming
  net: hns3: clear port base VLAN when unload PF
  net: hns3: fix RMW issue for VLAN filter switch
  net: hns3: fix VF VLAN table entries inconsistent issue
  net: hns3: fix "tc qdisc del" failed issue
  taprio: Fix sending packets without dequeueing them
  net: mvmdio: avoid error message for optional IRQ
  net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register
  net: memcg: fix lockdep splat in inet_csk_accept()
  s390/qeth: implement smarter resizing of the RX buffer pool
  s390/qeth: refactor buffer pool code
  s390/qeth: use page pointers to manage RX buffer pool
  seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number
  net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed
  net/packet: tpacket_rcv: do not increment ring index on drop
  sxgbe: Fix off by one in samsung driver strncpy size arg
  net: caif: Add lockdep expression to RCU traversal primitive
  MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer
  ...

Devices are formatted in multiple of tracks.
For an Extent Space Efficient (ESE) volume we get errors when accessing
unformatted tracks. In this case the driver either formats the track on
the flight for write requests or returns zero data for read requests.

In case a request spans multiple tracks, the indication of an unformatted
track presented for the first track is incorrectly applied to all tracks
covered by the request. As a result, tracks containing data will be handled
as empty, resulting in zero data being returned on read, or overwriting
existing data with zero on write.

Fix by determining the track that gets the NRF error.
For write requests only format the track that is surely not formatted.
For Read requests all tracks before have returned valid data and should not
be touched.
All tracks after the unformatted track might be formatted or not. Those are
returned to the blocklayer to build a new request.

When using alias devices there is a chance that multiple write requests
trigger a format of the same track which might lead to data loss. Ensure
that a track is formatted only once by maintaining a list of currently
processed tracks.

Fixes: 5e2b17e712cf ("s390/dasd: Add dynamic formatting support for ESE volumes")
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The RX buffer pool is allocated in qeth_alloc_qdio_queues().
A subsequent pool resizing is then handled in a very simple way:
first free the current pool, then allocate a new pool of the requested
size.

There's two ways where this can go wrong:
1. if the resize action happens _before_ the initial pool was allocated,
   then a subsequent initialization will call qeth_alloc_qdio_queues()
   and fill the pool with a second(!) set of pages. We consume twice the
   planned amount of memory.
   This is easy to fix - just skip the resizing if the queues haven't
   been allocated yet.
2. if the initial pool was created by qeth_alloc_qdio_queues() but a
   subsequent resizing fails, then the device has no(!) RX buffer pool.
   The next initialization will _not_ call qeth_alloc_qdio_queues(), and
   attempting to back the RX buffers with pages in
   qeth_init_qdio_queues() will fail.
   Not very difficult to fix either - instead of re-allocating the whole
   pool, just allocate/free as many entries to match the desired size.

Fixes: 4a71df50047f ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation for a subsequent fix, split out helpers to allocate/free
individual pool entries.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The RX buffer elements are always backed with full pages, reflect this
in the pointer type.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When qeth's napi poll code fails to refill an entirely empty RX ring, it
kicks off buffer_reclaim_work to try again later.

Make sure that this worker is cancelled when setting the qeth device
offline. Otherwise a RX refill action can unexpectedly end up running
concurrently to bigger re-configurations (eg. resizing the buffer pool),
without any locking.

Fixes: b333293058aa ("qeth: add support for af_iucv HiperSockets transport")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qeth_init_qdio_queues() fills the RX ring with an initial set of
RX buffers. If qeth_init_input_buffer() fails to back one of the RX
buffers with memory, we need to bail out and report the error.

Fixes: 4a71df50047f ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When an OSA device in prio-queue setup is reduced to 1 TX queue due to
HW restrictions, we reset its the default_out_queue to 0.

In the old code this was needed so that qeth_get_priority_queue() gets
the queue selection right. But with proper multiqueue support we already
reduced dev->real_num_tx_queues to 1, and so the stack puts all traffic
on txq 0 without even calling .ndo_select_queue.

Thus we can preserve the user's configuration, and apply it if the OSA
device later re-gains support for multiple TX queues.

Fixes: 73dc2daf110f ("s390/qeth: add TX multiqueue support for OSA devices")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull SCSI fixes from James Bottomley:
 "Four small fixes.

  Three are in drivers for fairly obvious bugs. The fourth is a set of
  regressions introduced by the compat_ioctl changes because some of the
  compat updates wrongly replaced .ioctl instead of .compat_ioctl"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: compat_ioctl: cdrom: Replace .ioctl with .compat_ioctl in four appropriate places
  scsi: zfcp: fix wrong data and display format of SFP+ temperature
  scsi: sd_sbc: Fix sd_zbc_report_zones()
  scsi: libfc: free response frame from GPN_ID