linux-stable.git/drivers/s390, branch v5.5

s390/zcrypt: move ap device reset from bus to driver code

2020-01-09T15:59:18+00:00

This patch moves the reset invocation of an ap device when
fresh detected from the ap bus to the probe() function of
the driver responsible for this device.

The virtualisation of ap devices makes it necessary to
remove unconditioned resets on fresh appearing apqn devices.
It may be that such a device is already enabled for guest
usage. So there may be a race condition between host ap bus
and guest ap bus doing the reset. This patch moves the
reset from the ap bus to the zcrypt drivers. So if there
is no zcrypt driver bound to an ap device - for example
the ap device is bound to the vfio device driver - the
ap device is untouched passed to the vfio device driver.

Signed-off-by: Harald Freudenberger 
Signed-off-by: Vasily Gorbik

s390/zcrypt: Fix CCA cipher key gen with clear key value function

2020-01-09T15:59:18+00:00

Regression tests showed that the CCA cipher key function which
generates an CCA cipher key with given clear key value does not work
correctly. At parsing the reply CPRB two limits are wrong calculated
resulting in rejecting the reply as invalid with s390dbf message
"_ip_cprb_helper reply with invalid or unknown key block".

Fixes: f2bbc96e7cfa ("s390/pkey: add CCA AES cipher key support")
Cc: Stable 
Signed-off-by: Harald Freudenberger 
Signed-off-by: Vasily Gorbik

s390/qeth: fix initialization on old HW

2019-12-25T06:41:06+00:00

I stumbled over an old OSA model that claims to support DIAG_ASSIST,
but then rejects the cmd to query its DIAG capabilities.

In the old code this was ok, as the returned raw error code was > 0.
Now that we translate the raw codes to errnos, the "rc < 0" causes us
to fail the initialization of the device.

The fix is trivial: don't bail out when the DIAG query fails. Such an
error is not critical, we can still use the device (with a slightly
reduced set of features).

Fixes: 742d4d40831d ("s390/qeth: convert remaining legacy cmd callbacks")
Signed-off-by: Julian Wiedmann 
Signed-off-by: David S. Miller

s390/qeth: vnicc Fix init to default

2019-12-25T06:41:06+00:00

During vnicc_init wanted_char should be compared to cur_char and not
to QETH_VNICC_DEFAULT. Without this patch there is no way to enforce
the default values as desired values.

Note, that it is expected, that a card comes online with default values.
This patch was tested with private card firmware.

Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support")
Signed-off-by: Alexandra Winter 
Signed-off-by: Julian Wiedmann 
Signed-off-by: David S. Miller

s390/qeth: Fix vnicc_is_in_use if rx_bcast not set

2019-12-25T06:41:06+00:00

Symptom: After vnicc/rx_bcast has been manually set to 0,
	bridge_* sysfs parameters can still be set or written.
Only occurs on HiperSockets, as OSA doesn't support changing rx_bcast.

Vnic characteristics and bridgeport settings are mutually exclusive.
rx_bcast defaults to 1, so manually setting it to 0 should disable
bridge_* parameters.

Instead it makes sense here to check the supported mask. If the card
does not support vnicc at all, bridge commands are always allowed.

Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support")
Signed-off-by: Alexandra Winter 
Signed-off-by: Julian Wiedmann 
Signed-off-by: David S. Miller

s390/qeth: fix false reporting of VNIC CHAR config failure

2019-12-25T06:41:06+00:00

Symptom: Error message "Configuring the VNIC characteristics failed"
in dmesg whenever an OSA interface on z15 is set online.

The VNIC characteristics get re-programmed when setting a L2 device
online. This follows the selected 'wanted' characteristics - with the
exception that the INVISIBLE characteristic unconditionally gets
switched off.

For devices that don't support INVISIBLE (ie. OSA), the resulting
IO failure raises a noisy error message
("Configuring the VNIC characteristics failed").
For IQD, INVISIBLE is off by default anyways.

So don't unnecessarily special-case the INVISIBLE characteristic, and
thereby suppress the misleading error message on OSA devices.

Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support")
Signed-off-by: Alexandra Winter 
Reviewed-by: Julian Wiedmann 
Signed-off-by: Julian Wiedmann 
Signed-off-by: David S. Miller

s390/qeth: lock the card while changing its hsuid

2019-12-25T06:41:06+00:00

qeth_l3_dev_hsuid_store() initially checks the card state, but doesn't
take the conf_mutex to ensure that the card stays in this state while
being reconfigured.

Rework the code to take this lock, and drop a redundant state check in a
helper function.

Fixes: b333293058aa ("qeth: add support for af_iucv HiperSockets transport")
Signed-off-by: Julian Wiedmann 
Signed-off-by: David S. Miller

s390/qeth: fix qdio teardown after early init error

2019-12-25T06:41:06+00:00

qeth_l?_set_online() goes through a number of initialization steps, and
on any error uses qeth_l?_stop_card() to tear down the residual state.

The first initialization step is qeth_core_hardsetup_card(). When this
fails after having established a QDIO context on the device
(ie. somewhere after qeth_mpc_initialize()), qeth_l?_stop_card() doesn't
shut down this QDIO context again (since the card state hasn't
progressed from DOWN at this stage).

Even worse, we then call qdio_free() as final teardown step to free the
QDIO data structures - while some of them are still hooked into wider
QDIO infrastructure such as the IRQ list. This is inevitably followed by
use-after-frees and other nastyness.

Fix this by unconditionally calling qeth_qdio_clear_card() to shut down
the QDIO context, and also to halt/clear any pending activity on the
various IO channels.
Remove the naive attempt at handling the teardown in
qeth_mpc_initialize(), it clearly doesn't suffice and we're handling it
properly now in the wider teardown code.

Fixes: 4a71df50047f ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann 
Signed-off-by: David S. Miller

Merge tag 'block-5.5-20191221' of git://git.kernel.dk/linux-block

2019-12-22T18:36:55+00:00

Pull block fixes from Jens Axboe:
 "Let's try this one again, this time without the compat_ioctl changes.
  We've got those fixed up, but that can go out next week.

  This contains:

   - block queue flush lockdep annotation (Bart)

   - Type fix for bsg_queue_rq() (Bart)

   - Three dasd fixes (Stefan, Jan)

   - nbd deadlock fix (Mike)

   - Error handling bio user map fix (Yang)

   - iocost fix (Tejun)

   - sbitmap waitqueue addition fix that affects the kyber IO scheduler
     (David)"

* tag 'block-5.5-20191221' of git://git.kernel.dk/linux-block:
  sbitmap: only queue kyber's wait callback if not already active
  block: fix memleak when __blk_rq_map_user_iov() is failed
  s390/dasd: fix typo in copyright statement
  s390/dasd: fix memleak in path handling error case
  s390/dasd/cio: Interpret ccw_device_get_mdc return value correctly
  block: Fix a lockdep complaint triggered by request queue flushing
  block: Fix the type of 'sts' in bsg_queue_rq()
  block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT
  nbd: fix shutdown and recv work deadlock v2
  iocost: over-budget forced IOs should schedule async delay

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2019-12-22T17:54:33+00:00

Pull networking fixes from David Miller:

 1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso,
    including adding a missing ipv6 match description.

 2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi
    Bhat.

 3) Fix uninit value in bond_neigh_init(), from Eric Dumazet.

 4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold.

 5) Fix use after free in tipc_disc_rcv(), from Tuong Lien.

 6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul
    Chaignon.

 7) Multicast MAC limit test is off by one in qede, from Manish Chopra.

 8) Fix established socket lookup race when socket goes from
    TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening
    RCU grace period. From Eric Dumazet.

 9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet.

10) Fix active backup transition after link failure in bonding, from
    Mahesh Bandewar.

11) Avoid zero sized hash table in gtp driver, from Taehee Yoo.

12) Fix wrong interface passed to ->mac_link_up(), from Russell King.

13) Fix DSA egress flooding settings in b53, from Florian Fainelli.

14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost.

15) Fix double free in dpaa2-ptp code, from Ioana Ciornei.

16) Reject invalid MTU values in stmmac, from Jose Abreu.

17) Fix refcount leak in error path of u32 classifier, from Davide
    Caratti.

18) Fix regression causing iwlwifi firmware crashes on boot, from Anders
    Kaseorg.

19) Fix inverted return value logic in llc2 code, from Chan Shu Tak.

20) Disable hardware GRO when XDP is attached to qede, frm Manish
    Chopra.

21) Since we encode state in the low pointer bits, dst metrics must be
    at least 4 byte aligned, which is not necessarily true on m68k. Add
    annotations to fix this, from Geert Uytterhoeven.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits)
  sfc: Include XDP packet headroom in buffer step size.
  sfc: fix channel allocation with brute force
  net: dst: Force 4-byte alignment of dst_metrics
  selftests: pmtu: fix init mtu value in description
  hv_netvsc: Fix unwanted rx_table reset
  net: phy: ensure that phy IDs are correctly typed
  mod_devicetable: fix PHY module format
  qede: Disable hardware gro when xdp prog is installed
  net: ena: fix issues in setting interrupt moderation params in ethtool
  net: ena: fix default tx interrupt moderation interval
  net/smc: unregister ib devices in reboot_event
  net: stmmac: platform: Fix MDIO init for platforms without PHY
  llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)
  net: hisilicon: Fix a BUG trigered by wrong bytes_compl
  net: dsa: ksz: use common define for tag len
  s390/qeth: don't return -ENOTSUPP to userspace
  s390/qeth: fix promiscuous mode after reset
  s390/qeth: handle error due to unsupported transport mode
  cxgb4: fix refcount init for TC-MQPRIO offload
  tc-testing: initial tdc selftests for cls_u32
  ...