linux-stable.git/drivers/s390, branch v3.0.6

qdio: clear shared DSCI before scheduling the queue handler

2011-10-03T18:40:44+00:00

commit b02f0c2ea25781e0f94b4fc8f6f85582057857b3 upstream.

The following race can occur with qdio devices that use the shared device
state change indicator:

Device (Shared DSCI)    CPU0                            CPU1
===============================================================================

1. DSCI 0 => 1,
   INT pending
                        2. Thinint handler
                        * si_used = 1
                        * Inbound tasklet_schedule
                        * DSCI 1 => 0

3. DSCI 0 => 1,
   INT pending

                                                        4. Thinint handler
                                                        * si_used = 1
                                                        * Inbound tasklet_schedu
le
                                                           => NOP

                        5. Inbound tasklet run

6. DSCI = 1,
   INT surpressed

                                                        7. DSCI 1 => 0

The race would lead to a stall where new data in the input queue is
not recognized so the device stops working in case of no further traffic.

Fix the race by resetting the DSCI before scheduling the inbound tasklet
so the device generates an interrupt if new data arrives in the above
scenario in step 6.

Reviewed-by: Ursula Braun 
Signed-off-by: Jan Glauber 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Greg Kroah-Hartman

[S390] qdio: Split SBAL entry flags

2011-06-06T12:14:56+00:00

The qdio SBAL entry flag is made-up of four different values that are
independent of one another. Some of the bits are reserved by the
hardware and should not be changed by qdio. Currently all four values
are overwritten since the SBAL entry flag is defined as an u32.

Split the SBAL entry flag into four u8's as defined by the hardware
and don't touch the reserved bits.

Signed-off-by: Jan Glauber 
Signed-off-by: Martin Schwidefsky

[S390] irq: merge irq.c and s390_ext.c

2011-05-26T07:48:24+00:00

Merge irq.c and s390_ext.c into irq.c. That way all external interrupt
related functions are together.

Signed-off-by: Heiko Carstens 
Signed-off-by: Martin Schwidefsky

[S390] irq: fix service signal external interrupt handling

2011-05-26T07:48:24+00:00

Interrupt sources like pfault, sclp, dasd_diag and virtio all use the
service signal external interrupt subclass mask in control register 0
to enable and disable the corresponding interrupt.
Because no reference counting is implemented each subsystem thinks it
is the only user of subclass and sets and clears the bit like it wants.
This leads to case that unloading the dasd diag module under z/VM
causes both sclp and pfault interrupts to be masked. The result will
be locked up system sooner or later.
Fix this by introducing a new way to set (register) and clear
(unregister) the service signal subclass mask bit in cr0.
Also convert all drivers.

Signed-off-by: Heiko Carstens 
Signed-off-by: Martin Schwidefsky

[S390] get CPC image name

2011-05-23T08:24:32+00:00

Provide sysfs attributes that contain the CPC name and the HMC network
name of the machine the operating system is running on. This information
is retrieved with the operation communication parameters (OCF) sclp
interface.

Signed-off-by: Martin Schwidefsky

[S390] sclp: event buffer dissection

2011-05-23T08:24:31+00:00

Move gds vector/subvector find functions to the sclp header file.
Simplify event buffer dissection in sclp tty code.

Signed-off-by: Martin Schwidefsky

[S390] chsc: process channel-path-availability information

2011-05-23T08:24:31+00:00

Update affected channel path descriptors when receiving channel path
availability information.

Signed-off-by: Sebastian Ott 
Signed-off-by: Martin Schwidefsky

[S390] qdio: prevent compile warning

2011-05-23T08:24:31+00:00

Prevent the following compile warning for !CONFIG_64BIT:

  CC      drivers/s390/cio/qdio_main.o
drivers/s390/cio/qdio_main.c: In function ‘handle_outbound’:
drivers/s390/cio/qdio_main.c:1449: warning: ‘state’ may be used uninitialized in this function

Signed-off-by: Jan Glauber 
Signed-off-by: Martin Schwidefsky

[S390] sclp: remove unnecessary sendmask check

2011-05-23T08:24:31+00:00

The sendmask check is not needed. Remove it.

Signed-off-by: Heiko Carstens 
Signed-off-by: Martin Schwidefsky

[S390] ap: skip device registration on type probe failure

2011-05-23T08:24:29+00:00

The registration of an ap device will be skipped, if the device type
probing fails.
Add names of current crypto adapters to the Kconfig help.

Signed-off-by: Holger Dengler 
Signed-off-by: Martin Schwidefsky