linux-stable.git/drivers/s390/block, branch linux-3.18.y

s390/dasd: Fix capacity calculation for large volumes

2019-05-16T07:17:22+00:00

[ Upstream commit 2cc9637ce825f3a9f51f8f78af7474e9e85bfa5f ]

The DASD driver incorrectly limits the maximum number of blocks of ECKD
DASD volumes to 32 bit numbers. Volumes with a capacity greater than
2^32-1 blocks are incorrectly recognized as smaller volumes.

This results in the following volume capacity limits depending on the
formatted block size:

  BLKSIZE  MAX_GB   MAX_CYL
      512    2047   5843492
     1024    4095   8676701
     2048    8191  13634816
     4096   16383  23860929

The same problem occurs when a volume with more than 17895697 cylinders
is accessed in raw-track-access mode.

Fix this problem by adding an explicit type cast when calculating the
maximum number of blocks.

Signed-off-by: Peter Oberparleiter 
Reviewed-by: Stefan Haberland 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Sasha Levin

s390/dasd: fix using offset into zero size array error

2019-03-23T07:18:59+00:00

[ Upstream commit 4a8ef6999bce998fa5813023a9a6b56eea329dba ]

Dan Carpenter reported the following:

The patch 52898025cf7d: "[S390] dasd: security and PSF update patch
for EMC CKD ioctl" from Mar 8, 2010, leads to the following static
checker warning:

	drivers/s390/block/dasd_eckd.c:4486 dasd_symm_io()
	error: using offset into zero size array 'psf_data[]'

drivers/s390/block/dasd_eckd.c
  4458          /* Copy parms from caller */
  4459          rc = -EFAULT;
  4460          if (copy_from_user(&usrparm, argp, sizeof(usrparm)))
                                    ^^^^^^^
The user can specify any "usrparm.psf_data_len".  They choose zero by
mistake.

  4461                  goto out;
  4462          if (is_compat_task()) {
  4463                  /* Make sure pointers are sane even on 31 bit. */
  4464                  rc = -EINVAL;
  4465                  if ((usrparm.psf_data >> 32) != 0)
  4466                          goto out;
  4467                  if ((usrparm.rssd_result >> 32) != 0)
  4468                          goto out;
  4469                  usrparm.psf_data &= 0x7fffffffULL;
  4470                  usrparm.rssd_result &= 0x7fffffffULL;
  4471          }
  4472          /* alloc I/O data area */
  4473          psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL
  			   				 | GFP_DMA);
  4474          rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL
							       | GFP_DMA);
  4475          if (!psf_data || !rssd_result) {

kzalloc() returns a ZERO_SIZE_PTR (0x16).

  4476                  rc = -ENOMEM;
  4477                  goto out_free;
  4478          }
  4479
  4480          /* get syscall header from user space */
  4481          rc = -EFAULT;
  4482          if (copy_from_user(psf_data,
  4483                             (void __user *)(unsigned long)
  				   	 		 usrparm.psf_data,
  4484                             usrparm.psf_data_len))

That all works great.

  4485                  goto out_free;
  4486          psf0 = psf_data[0];
  4487          psf1 = psf_data[1];

But now we're assuming that "->psf_data_len" was at least 2 bytes.

Fix this by checking the user specified length psf_data_len.

Fixes: 52898025cf7d ("[S390] dasd: security and PSF update patch for EMC CKD ioctl")
Reported-by: Dan Carpenter 
Signed-off-by: Stefan Haberland 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Sasha Levin

s390/dasd: fix hanging offline processing due to canceled worker

2018-09-26T06:33:51+00:00

[ Upstream commit 669f3765b755fd8739ab46ce3a9c6292ce8b3d2a ]

During offline processing two worker threads are canceled without
freeing the device reference which leads to a hanging offline process.

Reviewed-by: Jan Hoeppner 
Signed-off-by: Stefan Haberland 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

s390/dasd: fix wrongly assigned configuration data

2018-03-03T09:17:09+00:00

[ Upstream commit 8a9bd4f8ebc6800bfc0596e28631ff6809a2f615 ]

We store per path and per device configuration data to identify the
path or device correctly. The per path configuration data might get
mixed up if the original request gets into error recovery and is
started with a random path mask.

This would lead to a wrong identification of a path in case of a CUIR
event for example.

Fix by copying the path mask from the original request to the error
recovery request in case it is a path verification request.

Signed-off-by: Stefan Haberland 
Reviewed-by: Jan Hoeppner 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

s390/dasd: prevent prefix I/O error

2018-02-25T10:01:20+00:00

[ Upstream commit da340f921d3454f1521671c7a5a43ad3331fbe50 ]

Prevent that a prefix flag is set based on invalid configuration data.
The validity.verify_base flag should only be set for alias devices.
Usually the unit address type is either one of base, PAV alias or
HyperPAV alias. But in cases where the unit address type is not set or
any other value the validity.verify_base flag might be set as well.
This would lead to follow on errors.
Explicitly check for alias devices and set the validity flag only for
them.

Signed-off-by: Stefan Haberland 
Reviewed-by: Jan Hoeppner 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

s390/dasd: check for device error pointer within state change interrupts

2017-11-08T09:03:50+00:00

[ Upstream commit 2202134e48a3b50320aeb9e3dd1186833e9d7e66 ]

Check if the device pointer is valid. Just a sanity check since we already
are in the int handler of the device.

Signed-off-by: Stefan Haberland 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

s390/dasd: fix hanging device after clear subchannel

2016-08-31T23:31:59+00:00

[ Upstream commit 9ba333dc55cbb9523553df973adb3024d223e905 ]

When a device is in a status where CIO has killed all I/O by itself the
interrupt for a clear request may not contain an irb to determine the
clear function. Instead it contains an error pointer -EIO.
This was ignored by the DASD int_handler leading to a hanging device
waiting for a clear interrupt.

Handle -EIO error pointer correctly for requests that are clear pending and
treat the clear as successful.

Signed-off-by: Stefan Haberland 
Reviewed-by: Sebastian Ott 
Cc: stable@vger.kernel.org
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Sasha Levin

s390/dasd: fix refcount for PAV reassignment

2016-03-04T15:18:40+00:00

[ Upstream commit 9d862ababb609439c5d6987f6d3ddd09e703aa0b ]

Add refcount to the DASD device when a summary unit check worker is
scheduled. This prevents that the device is set offline with worker
in place.

Cc: stable@vger.kernel.org
Signed-off-by: Stefan Haberland 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Sasha Levin

s390/dasd: prevent incorrect length error under z/VM after PAV changes

2016-03-04T15:18:40+00:00

[ Upstream commit 020bf042e5b397479c1174081b935d0ff15d1a64 ]

The channel checks the specified length and the provided amount of
data for CCWs and provides an incorrect length error if the size does
not match. Under z/VM with simulation activated the length may get
changed. Having the suppress length indication bit set is stated as
good CCW coding practice and avoids errors under z/VM.

Cc: stable@vger.kernel.org
Signed-off-by: Stefan Haberland 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Sasha Levin

Merge branch 'for-3.18/drivers' of git://git.kernel.dk/linux-block

2014-10-18T19:12:45+00:00

Pull block layer driver update from Jens Axboe:
 "This is the block driver pull request for 3.18.  Not a lot in there
  this round, and nothing earth shattering.

   - A round of drbd fixes from the linbit team, and an improvement in
     asender performance.

   - Removal of deprecated (and unused) IRQF_DISABLED flag in rsxx and
     hd from Michael Opdenacker.

   - Disable entropy collection from flash devices by default, from Mike
     Snitzer.

   - A small collection of xen blkfront/back fixes from Roger Pau Monné
     and Vitaly Kuznetsov"

* 'for-3.18/drivers' of git://git.kernel.dk/linux-block:
  block: disable entropy contributions for nonrot devices
  xen, blkfront: factor out flush-related checks from do_blkif_request()
  xen-blkback: fix leak on grant map error path
  xen/blkback: unmap all persistent grants when frontend gets disconnected
  rsxx: Remove deprecated IRQF_DISABLED
  block: hd: remove deprecated IRQF_DISABLED
  drbd: use RB_DECLARE_CALLBACKS() to define augment callbacks
  drbd: compute the end before rb_insert_augmented()
  drbd: Add missing newline in resync progress display in /proc/drbd
  drbd: reduce lock contention in drbd_worker
  drbd: Improve asender performance
  drbd: Get rid of the WORK_PENDING macro
  drbd: Get rid of the __no_warn and __cond_lock macros
  drbd: Avoid inconsistent locking warning
  drbd: Remove superfluous newline from "resync_extents" debugfs entry.
  drbd: Use consistent names for all the bi_end_io callbacks
  drbd: Use better variable names