linux-stable.git/drivers/rtc, branch v7.2.5

rtc: rzn1: Disable alarm interrupt before reprogramming alarm registers

2026-09-11T09:50:53+00:00

commit 51458d5b0a1cfb1b6013400abc95aadf16ed2a57 upstream.

rzn1_rtc_set_alarm() updates RZN1_RTC_ALM, RZN1_RTC_ALH and
RZN1_RTC_ALW using separate MMIO writes without first disabling the
alarm interrupt. If a previous alarm is still enabled, the interrupt
can fire while the alarm registers contain a mixture of old and newly
written values.

Fix this by disabling the alarm interrupt before reprogramming ALM, ALH
and ALW with a call to rzn1_rtc_alarm_irq_enable().

Fixes: b5ad1bf00d2c4 ("rtc: rzn1: Add alarm support")
Cc: stable@vger.kernel.org
Signed-off-by: Lad Prabhakar 
Reviewed-by: Wolfram Sang 
Tested-by: Wolfram Sang 
Link: https://patch.msgid.link/20260821211032.13554-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni 
Signed-off-by: Greg Kroah-Hartman

rtc: rzn1: Handle unset alarm weekday in rzn1_rtc_read_alarm

2026-09-11T09:50:53+00:00

commit 457b5dbce31209e65e1184716ed3af59cb1c0372 upstream.

RZN1_RTC_ALW is a weekday bitmask where bit N represents weekday N.
When no alarm has been configured, the register has its power-on-reset
value of zero.

rzn1_rtc_read_alarm() uses fls() to convert the weekday bitmask into a
weekday number. When RZN1_RTC_ALW is zero, fls(0) returns zero and
fls(wday) - 1 evaluates to -1. This invalid weekday is then used to
calculate the alarm date and can either leave tm_wday set to -1 or
produce a fabricated alarm date.

Treat a zero RZN1_RTC_ALW value as an unset alarm weekday and return
without calculating the alarm date. Move reading RZN1_RTC_CTL1 before
this check so that alrm->enabled is updated for both configured and
unconfigured alarms.

Fixes: b5ad1bf00d2c4 ("rtc: rzn1: Add alarm support")
Cc: stable@vger.kernel.org
Signed-off-by: Lad Prabhakar 
Reviewed-by: Wolfram Sang 
Tested-by: Wolfram Sang 
Link: https://patch.msgid.link/20260821211032.13554-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni 
Signed-off-by: Greg Kroah-Hartman

rtc: rzn1: Fix weekday underflow when alarm crosses month boundary

2026-09-11T09:50:53+00:00

commit 022a2839a52006531804a8db55d3228084400b48 upstream.

rzn1_rtc_set_alarm() calculates the alarm weekday from the difference
between the alarm day and the current day of the month. When the alarm
crosses a month boundary, this difference can become negative. Since
days_ahead is unsigned, it underflows and results in an incorrect
weekday being programmed into RZN1_RTC_ALW.

The RTC core already provides a fully populated struct rtc_time for
the alarm, including the correct tm_wday. Use tm->tm_wday directly
instead of recalculating the weekday from the day-of-month.

This avoids the underflow and ensures alarms scheduled across a month
boundary use the correct weekday.

Fixes: b5ad1bf00d2c4 ("rtc: rzn1: Add alarm support")
Cc: stable@vger.kernel.org
Signed-off-by: Lad Prabhakar 
Suggested-by: Wolfram Sang 
Reviewed-by: Wolfram Sang 
Tested-by: Wolfram Sang 
Link: https://patch.msgid.link/20260821211032.13554-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni 
Signed-off-by: Greg Kroah-Hartman

rtc: rzn1: Handle EPROBE_DEFER for optional pps interrupt

2026-09-11T09:50:53+00:00

commit 708546aa39560a11cf44c7ba99492c8395a6c2fb upstream.

Check for -EPROBE_DEFER from platform_get_irq_byname_optional() and handle
the deferred probe request properly.

Although the "pps" interrupt is optional, an error code of -EPROBE_DEFER
indicates that the interrupt subsystem is not yet ready. Intercept this
specific error condition, assign it to the return value, and jump to the
dis_runtime_pm label to avoid ignoring a valid probe deferral.

Fixes: eea7791e00f33 ("rtc: rzn1: implement one-second accuracy for alarms")
Cc: stable@vger.kernel.org
Signed-off-by: Lad Prabhakar 
Reviewed-by: Wolfram Sang 
Tested-by: Wolfram Sang 
Link: https://patch.msgid.link/20260821211032.13554-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni 
Signed-off-by: Greg Kroah-Hartman

Replace by more specific (c files)

2026-07-03T05:38:17+00:00

Replace the #include of  by the more specific
 where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.

Acked-by: Danilo Krummrich 
Acked-by: Takashi Sakamoto 
Acked-by: Bjorn Helgaas 
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub)

Merge tag 'rtc-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2026-06-27T18:00:18+00:00

Pull RTC updates from Alexandre Belloni:
 "Most of the work and improvements are for features of the m41t93.

  The ds1307 also gets support for OSF (Oscillator Stop Flag) for
  new variants.

  The pcap driver is being removed as the Motorola EZX support was
  removed a while ago.

  Subsystem:
   - add rtc_read_next_alarm() to read next expiring timer

  Drivers:
   - ds1307: handle OSF for ds1337/ds1339/ds3231, add clock provider for
     ds1307, fix wday for rx8130
   - m41t93: DT support, alarm, clock provider, watchdog support
   - mv: add suspend/resume support for wakeup
   - pcap: remove driver
   - renesas-rtca3: many fixes"

* tag 'rtc-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (36 commits)
  rtc: ds1307: update reference to removed CONFIG_RTC_DRV_DS1307_HWMON
  platform/x86: amd-pmc: Fix S0i3 wakeup with alarmtimer
  rtc: s35390a: fix typo in comment
  rtc: cmos: unregister HPET IRQ handler on probe failure
  rtc: ds1307: Fix off-by-one issue with wday for rx8130
  dt-bindings: rtc: ds1307: Add epson,rx8901
  rtc: bq32000: add delay between RTC reads
  rtc: m41t93: Add watchdog support
  rtc: m41t93: Add square wave clock provider support
  rtc: m41t93: Add alarm support
  rtc: m41t93: migrate to regmap api for register access
  rtc: m41t93: add device tree support
  dt-bindings: rtc: Add ST m41t93
  rtc: ds1307: add support for clock provider in ds1307
  rtc: mv: add suspend/resume support for wakeup
  rtc: aspeed: add AST2700 compatible
  dt-bindings: rtc: add ASPEED AST2700 compatible
  rtc: interface: fix typos in rtc_handle_legacy_irq() documentation
  rtc: msc313: fix NULL deref in shared IRQ handler at probe
  rtc: remove unused pcap driver
  ...

rtc: ds1307: update reference to removed CONFIG_RTC_DRV_DS1307_HWMON

2026-06-25T12:44:39+00:00

The CONFIG_RTC_DRV_DS1307_HWMON macro was removed in favor of
CONFIG_HWMON in commit 6b583a64fd1e ("rtc: ds1307: simplify hwmon
config"), but a reference to it remained in a comment. Correct this
reference.

Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.

Signed-off-by: Ethan Nelson-Moore 
Link: https://patch.msgid.link/20260610054723.261008-1-enelsonmoore@gmail.com
Signed-off-by: Alexandre Belloni

rtc: s35390a: fix typo in comment

2026-06-25T06:57:52+00:00

Fix trivial typo

Link: https://patch.msgid.link/20260624204223.1479003-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni

rtc: cmos: unregister HPET IRQ handler on probe failure

2026-06-24T21:49:00+00:00

cmos_do_probe() registers cmos_interrupt() as the HPET RTC IRQ
handler before requesting the RTC IRQ and registering the RTC
device. If either request_irq() or devm_rtc_register_device()
fails afterwards, the error path leaves the HPET RTC IRQ handler
installed. This leaves a stale handler behind and make a later
hpet_register_irq_handler() fail with -EBUSY.

Track whether the HPET handler was registered successfully and
undo the registration on the probe error path. Also mask the HPET
RTC IRQ bits to match the normal shutdown cleanup.

Fixes: 9d8af78b0797 ("rtc: add HPET RTC emulation to RTC_DRV_CMOS")
Signed-off-by: Haoxiang Li 
Link: https://patch.msgid.link/20260623100848.2127281-1-haoxiang_li2024@163.com
Signed-off-by: Alexandre Belloni

rtc: ds1307: Fix off-by-one issue with wday for rx8130

2026-06-24T21:40:10+00:00

The RTC represent each weekday with a individual bit set in the WDAY
register, where the 0th bit represent the first day of the week and the
6th bit represents the last day of the week. For each passed day the
chip performs a rotary-left-shift by one to advance the weekday by one.

The tm_wday field represent weekdays by a value in the range of 0-6.

The fls() function return the bit index of the last bit set. To handle
when there are no bits set it will return 0, and if the 0th bit is set
it will return 1, and if the 1st bit is set it will return 2, and so on.

In order to make the result of the fls() function fall into the expected
range of 0-6 (instead of 1-7) this patch subtracts one from the result
(which matches how the value is written in ds1307_set_time()).

Fixes: 204756f016726 ("rtc: ds1307: Fix wday settings for rx8130")
Reviewed-by: Nobuhiro Iwamatsu 
Signed-off-by: Fredrik M Olsson 
Link: https://patch.msgid.link/20260520-ds1307-rx8901-add-v2-2-e069ea32e1db@axis.com
Signed-off-by: Alexandre Belloni