linux-stable.git/drivers/rtc/rtc-ds1307.c, branch linux-5.7.y

rtc: ds1307: check for failed memory allocation on wdt

2020-04-03T11:38:24+00:00

Currently a failed memory allocation will lead to a null pointer
dereference on point wdt.  Fix this by checking for a failed
allocation and just returning.

Addresses-Coverity: ("Dereference null return")
Fixes: fd90d48db037 ("rtc: ds1307: add support for watchdog timer on ds1388")

Signed-off-by: Colin Ian King 
Link: https://lore.kernel.org/r/20200403110437.57420-1-colin.king@canonical.com
Signed-off-by: Alexandre Belloni

rtc: ds1307: add support for watchdog timer on ds1388

2020-04-01T10:33:44+00:00

The DS1388 variant has watchdog timer capabilities. When using a DS1388
and having enabled CONFIG_WATCHDOG_CORE register a watchdog device for
the DS1388.

Signed-off-by: Chris Packham 
Reviewed-by: Guenter Roeck 
Link: https://lore.kernel.org/r/20200330025500.6991-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Alexandre Belloni

rtc: ds1307: handle oscillator failure flags for ds1388 variant

2020-03-22T20:40:01+00:00

The FLAG register is at a different location to the other supported RTCs
so this requires an extra case in the existing switch statement.

Signed-off-by: Chris Packham 
Link: https://lore.kernel.org/r/20200207031812.14424-2-chris.packham@alliedtelesis.co.nz
Signed-off-by: Alexandre Belloni

Merge tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2019-07-17T17:03:50+00:00

Pull RTC updates from Alexandre Belloni:
 "A quiet cycle this time.

   - ds1307: properly handle oscillator failure flags

   - imx-sc: alarm support

   - pcf2123: alarm support, correct offset handling

   - sun6i: add R40 support

   - simplify getting the adapter of an i2c client"

* tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (37 commits)
  rtc: wm831x: Add IRQF_ONESHOT flag
  rtc: stm32: remove one condition check in stm32_rtc_set_alarm()
  rtc: pcf2123: Fix build error
  rtc: interface: Change type of 'count' from int to u64
  rtc: pcf8563: Clear event flags and disable interrupts before requesting irq
  rtc: pcf8563: Fix interrupt trigger method
  rtc: pcf2123: fix negative offset rounding
  rtc: pcf2123: add alarm support
  rtc: pcf2123: use %ptR
  rtc: pcf2123: port to regmap
  rtc: pcf2123: remove sysfs register view
  rtc: rx8025: simplify getting the adapter of a client
  rtc: rx8010: simplify getting the adapter of a client
  rtc: rv8803: simplify getting the adapter of a client
  rtc: m41t80: simplify getting the adapter of a client
  rtc: fm3130: simplify getting the adapter of a client
  rtc: tegra: Drop MODULE_ALIAS
  rtc: sun6i: Add R40 compatible
  dt-bindings: rtc: sun6i: Add the R40 RTC compatible
  dt-bindings: rtc: Convert Allwinner A31 RTC to a schema
  ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Enrico Weigelt 
Reviewed-by: Kate Stewart 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman

rtc: ds1307: properly handle oscillator failure flags

2019-05-23T15:53:03+00:00

Stop enabling the oscillator and removing the oscillator failure flags in
probe. Instead, return -EINVAL in .read_time when the oscillaotr is not
start or when it failed at some point. The oscillator gets enabled on the
first .set_time after failure and the failure flags are cleared.

This also removes the possibility of an infinite loop at probe where a
failing RTC will make the goto read_rtc to be taken every time.

Tested on mcp79411.

Reported-by: Mastro Gippo 
Signed-off-by: Alexandre Belloni

rtc: ds1307: rx8130: Fix alarm handling

2019-02-07T19:55:48+00:00

When the EXTENSION.WADA bit is set, register 0x19 contains a bitmap of
week days, not a day of month. As Linux only handles a single alarm
without repetition using day of month is more flexible, so clear this
bit. (Otherwise a value depending on time.tm_wday would have to be
written to register 0x19.)

Also optimize setting the AIE bit to use a single register write instead
of a bulk write of three registers.

Fixes: ee0981be7704 ("rtc: ds1307: Add support for Epson RX8130CE")
Signed-off-by: Uwe Kleine-König 
Signed-off-by: Alexandre Belloni

rtc: ds1307: rx8130: honor Voltage Loss Flag when reading the time

2019-02-07T19:55:46+00:00

When voltage dropped since the RTC was last set the reported time is not
reliable. In this case return an error indicator instead of a bogus
time.

Signed-off-by: Uwe Kleine-König 
Signed-off-by: Alexandre Belloni

rtc: ds1307: correct register offset for rx8130

2019-02-07T19:55:44+00:00

While rx8130 has a register offset of 0x10 in its chip_desc, this isn't
used when regmap accesses are done. So add 0x10 to access the right
locations.

Fixes: ee0981be7704 ("rtc: ds1307: Add support for Epson RX8130CE")
Signed-off-by: Uwe Kleine-König 
Signed-off-by: Alexandre Belloni

rtc: ds1307: forward declare chips array instead of a bunch of functions

2019-02-07T19:55:41+00:00

There used to be 16 declarations for static functions. By just adding a
declaration for the chips array and reordering the functions the 16
function declarations can be dropped.

Signed-off-by: Uwe Kleine-König 
Signed-off-by: Alexandre Belloni