linux-stable.git/drivers/rtc/rtc-bfin.c, branch linux-3.8.y

Drivers: rtc: remove __dev* attributes.

2013-01-03T23:57:02+00:00

CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton 
Cc: Alessandro Zummo 
Cc: Srinidhi Kasagar 
Cc: Linus Walleij 
Cc: Mike Frysinger 
Cc: Wan ZongShun 
Cc: Guan Xuetao 
Cc: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

rtc: convert drivers/rtc/* to use module_platform_driver()

2012-01-11T00:30:53+00:00

This patch converts the drivers in drivers/rtc/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.

Signed-off-by: Axel Lin 
Acked-by: Mark Brown 
Acked-by: Mike Frysinger 
Acked-by: Guan Xuetao 
Acked-by: Linus Walleij 
Acked-by: Haojian Zhuang 
Cc: Alessandro Zummo 
Cc: Srinidhi Kasagar 
Cc: Lars-Peter Clausen 
Cc: Ben Dooks 
Cc: John Stultz 
Acked-by: Jean-Christophe PLAGNIOL-VILLARD 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'fortglx/39/tip/timers/rtc' of git://git.linaro.org/people/jstultz/linux into timers/urgent

2011-04-12T23:54:09+00:00

Fix common misspellings

2011-03-31T14:26:23+00:00

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi

RTC: add missing "return 0" in new alarm func for rtc-bfin.c

2011-03-30T01:47:57+00:00

The new bfin_rtc_alarm_irq_enable function forgot to add a "return 0" to
the end leading to the build warning:
	drivers/rtc/rtc-bfin.c: In function 'bfin_rtc_alarm_irq_enable':
	drivers/rtc/rtc-bfin.c:253: warning: control reaches end of non-void function

CC: stable@kernel.org
CC: Thomas Gleixner 
CC: Alessandro Zummo 
Signed-off-by: Mike Frysinger 
Signed-off-by: John Stultz

RTC: Clean out UIE icotl implementations

2011-03-09T19:24:54+00:00

With the generic RTC rework, the UIE mode irqs are handled
in the generic layer, and only hardware specific ioctls
get passed down to the rtc driver layer.

So this patch removes the UIE mode ioctl handling in the rtc
driver layer, which never get used.

CC: Thomas Gleixner 
CC: Alessandro Zummo 
CC: Marcelo Roberto Jimenez 
CC: rtc-linux@googlegroups.com
Signed-off-by: John Stultz

RTC: Convert rtc drivers to use the alarm_irq_enable method

2011-02-03T21:02:35+00:00

Some rtc drivers use the ioctl method instead of the alarm_irq_enable
method for enabling alarm interupts. With the new virtualized RTC
rework, its important for drivers to use the alarm_irq_enable instead.

This patch converts the drivers that use the AIE ioctl method to
use the alarm_irq_enable method. Other ioctl cmds are left untouched.

I have not been able to test or even compile most of these drivers.
Any help to make sure this change is correct would be appreciated!

CC: Alessandro Zummo 
CC: Thomas Gleixner 
CC: Marcelo Roberto Jimenez 
Reported-by: Marcelo Roberto Jimenez 
Tested-by: Marcelo Roberto Jimenez 
Signed-off-by: John Stultz

rtc-bfin: add debug markers to suspend/resume paths

2010-10-28T01:03:05+00:00

The rest of the driver had debug markings already.  This also standardizes
the usage of "dev" a bit.

Signed-off-by: Mike Frysinger 
Acked-by: Alessandro Zummo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc-bfin: shrink/optimize interrupt handler a bit

2010-10-28T01:03:05+00:00

By unifying the RTC_ISTAT clearing steps, we shrink the interrupt handler
and avoid multiple writes to the hardware registers.

Signed-off-by: Mike Frysinger 
Acked-by: Alessandro Zummo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc-bfin: fix state restoration when resuming

2010-09-10T01:57:22+00:00

Much (but not all) of the RTC state is kept in the RTC peripheral which
has its own power domain.  Periodically (1 HZ), that state is synced from
one power domain to the other (peripheral->core).  When we are resuming,
we need to wait for the sync to occur so that we don't get a mismatch of
reading undefined state in the rest of the driver.

Further, once the externally maintained bits have been synced back into
the core, we then need to restore the bits maintained in the core.  In our
particular case, that is just the write completion interrupt bit.

If we don't do any of this, working with the RTC causes ~5 second delays
from time to time after waking up due to the write completion interrupt
never firing.

Reported-by: Michael Dean 
Reported-by: Michael Hennerich 
Signed-off-by: Mike Frysinger 
Acked-by: Alessandro Zummo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds