linux-stable.git/drivers/rtc/Kconfig, branch linux-5.6.y

rtc: max8907: add missing select REGMAP_IRQ

2020-03-19T16:55:25+00:00

I have hit the following build error:

  armv7a-hardfloat-linux-gnueabi-ld: drivers/rtc/rtc-max8907.o: in function `max8907_rtc_probe':
  rtc-max8907.c:(.text+0x400): undefined reference to `regmap_irq_get_virq'

max8907 should select REGMAP_IRQ

Fixes: 94c01ab6d7544 ("rtc: add MAX8907 RTC driver")
Cc: stable 
Signed-off-by: Corentin Labbe 
Signed-off-by: Linus Torvalds

Merge tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2020-02-04T07:03:40+00:00

Pull RTC updates from Alexandre Belloni:
 "The VL_READ and VL_CLR ioctls have been reworked to be more useful.
  This will not break userspace as there are very few users and they are
  using the integer value as a boolean.

  Apart from that, two drivers were reworked and a few fixes here and
  there for a net reduction of number of lines.

  Summary:

  Subsystem:
   - the VL_READ and VL_CLR ioctls are now documented and their behavior
     is unified across all the drivers.
   - RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both
     REGMAP_I2C and REGMAP_SPI unecessarily.

  Drivers:
   - at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and
     sama5d2 compatibles.
   - cmos: solve lost interrupts issue on MS Surface 3
   - hym8563: return proper errno when time is invalid
   - rv3029: many fixes, nvram support"

* tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (63 commits)
  dt-bindings: rtc: at91rm9200: document clocks property
  rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
  rtc: Kconfig: select REGMAP_I2C when necessary
  rtc: Kconfig: properly indent sd3078 entry
  rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper
  rtc: cmos: Use predefined value for RTC IRQ on legacy x86
  rtc: cmos: Stop using shared IRQ
  rtc: tps6586x: Use IRQ_NOAUTOEN flag
  rtc: at91rm9200: use FIELD_PREP/FIELD_GET
  rtc: at91rm9200: avoid time readout in at91_rtc_setalarm
  rtc: at91rm9200: move register definitions to C file
  rtc: at91rm9200: add sama5d4 and sama5d2 compatibles
  dt-bindings: rtc: at91rm9200: convert bindings to json-schema
  rtc: at91rm9200: remove procfs information
  dt-bindings: atmel, at91rm9200-rtc: add microchip, sam9x60-rtc
  rtc: pcf8563: Use BIT
  rtc: moxart: Convert to SPDX identifier
  rtc: ds1343: Remove unused struct spi_device in struct ds1343_priv
  rtc: rx8025: Remove struct i2c_client from struct rx8025_data
  rtc: hym8563: Read the valid flag directly instead of caching it
  ...

rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed

2020-01-27T22:36:35+00:00

Merely enabling I2C and RTC selects REGMAP_I2C and REGMAP_SPI, even when
no driver needs it.  While the former can be moduler, the latter cannot,
and thus becomes built-in.

Fix this by moving the select statements for REGMAP_I2C and REGMAP_SPI
from the RTC_I2C_AND_SPI helper to the individual drivers that depend on
it.

Note that the comment for RTC_I2C_AND_SPI refers to SND_SOC_I2C_AND_SPI
for more information, but the latter does not select REGMAP_{I2C,SPI}
itself, and defers that to the individual drivers, too.

Fixes: 080481f54ef62121 ("rtc: merge ds3232 and ds3234")
Signed-off-by: Geert Uytterhoeven 
Reported-by: kbuild test robot 
Reported-by: kbuild test robot 
Link: https://lore.kernel.org/r/20200112171349.22268-1-geert@linux-m68k.org
Signed-off-by: Alexandre Belloni

rtc: Kconfig: select REGMAP_I2C when necessary

2020-01-27T22:36:19+00:00

Some i2c RTC drivers are using regmap but are not selecting REGMAP_I2C
which may lead to build failures.

Link: https://lore.kernel.org/r/20200127221724.10160-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni

rtc: Kconfig: properly indent sd3078 entry

2020-01-27T22:36:17+00:00

The RTC_DRV_SD3078 is indented using spaces, use tabs instead.

Link: https://lore.kernel.org/r/20200127221724.10160-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni

rtc: bd70528: add BD71828 support

2020-01-24T07:23:06+00:00

ROHM BD71828 PMIC RTC block is from many parts similar to one
on BD70528. Support BD71828 RTC using BD70528 RTC driver and
avoid re-inventing the wheel.

Signed-off-by: Matti Vaittinen 
Acked-by: Alexandre Belloni 
Signed-off-by: Lee Jones

rtc: Fix Kconfig indentation

2019-11-27T08:31:14+00:00

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
	$ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20191120133940.13881-1-krzk@kernel.org
Signed-off-by: Alexandre Belloni

rtc: fsl-ftm-alarm: remove select FSL_RCPM and default y from Kconfig

2019-11-15T12:59:29+00:00

The Flextimer alarm is primarily used as a wakeup source for system
power management.  But it shouldn't select the power management driver
as they don't really have dependency of each other.

Also remove the default y as it is not a critical feature for the
systems.

Signed-off-by: Li Yang 
Link: https://lore.kernel.org/r/1573252856-11759-1-git-send-email-leoyang.li@nxp.com
Signed-off-by: Alexandre Belloni

rtc: meson-vrtc: move config option to proper location

2019-10-16T08:39:00+00:00

The correct location for this option is under platform driver, not i2c
drivers.

Link: https://lore.kernel.org/r/20191014155840.22554-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni

rtc: at91rm9200: use of_device_get_match_data()

2019-10-03T19:50:47+00:00

Use of_device_get_match_data() since all platforms should now use DT
bindings. AVR32 architecture has been removed in
commit 26202873bb51 ("avr32: remove support for AVR32 architecture").

Signed-off-by: Claudiu Beznea 
Link: https://lore.kernel.org/r/1569500132-21164-1-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Alexandre Belloni