The LDO 12 is NLDO 515 low voltage type, so fix accordingly.
Fixes: e6e3776d682d ("regulator: qcom-rpmh: Add support for PM8550 regulators")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230801095702.2891127-1-abel.vesa@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Two versions of the original patch were sent but V1 was merged instead
of V2 due to a mistake.
So update to V2.
The advantage of V2 is that it completely avoids dereferencing the pointer,
even just to take the address, which may fix problems with some compilers.
Both versions work on my gcc 9.4 but use the safer one.
Fixes: 98e2dd5f7a8b ("regulator: da9063: fix null pointer deref with partial DT config")
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Tested-by: Benjamin Bara <benjamin.bara@skidata.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230804083514.1887124-1-martin.fuzzey@flowbird.group
Signed-off-by: Mark Brown <broonie@kernel.org>
After syncing the enable status of VCN33_WIFI to VCN33_BT, the driver
will disable VCN33_WIFI. If it fails it will error out with a message.
However the error message incorrectly refers to VCN33_BT.
Fix the error message so that it correctly refers to VCN33_WIFI.
Suggested-by: Fei Shao <fshao@chromium.org>
Fixes: 65bae54e08c1 ("regulator: mt6358: Merge VCN33_* regulators")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721082903.2038975-4-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Syncing VCN33_* enable status should be done after checking the PMIC's
ID, to avoid setting random bits on other PMICs.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: 65bae54e08c1 ("regulator: mt6358: Merge VCN33_* regulators")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721082903.2038975-3-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When some of the da9063 regulators do not have corresponding DT nodes
a null pointer dereference occurs on boot because such regulators have
no init_data causing the pointers calculated in
da9063_check_xvp_constraints() to be invalid.
Do not dereference them in this case.
Fixes: b8717a80e6ee ("regulator: da9063: implement setter for voltage monitoring")
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Link: https://lore.kernel.org/r/20230616143736.2946173-1-martin.fuzzey@flowbird.group
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull regulator fix from Mark Brown: "A simple dependency fix for a newly added driver" * tag 'regulator-fix-v6.5-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: raa215300: Add build dependency with COMMON_CLK
Pull MFD updates from Lee Jones: "New Drivers: - Add support for TI TPS6594/TPS6593/LP8764 PMICs - Add support for Samsung RT5033 Battery Charger - Add support for Analog Devices MAX77540 and MAX77541 PMICs New Device Support: - Add support for SPI to Rockchip RK808 (and friends) - Add support for AXP192 PMIC to X-Powers AXP20X - Add support for AXP313a PMIC to X-Powers AXP20X - Add support for RK806 to Rockchip RK8XX Removed Device Support: - Removed MFD support for Richtek RT5033 Battery Fix-ups: - Remove superfluous code - Switch I2C drivers from .probe_new() to .probe() - Convert over to managed resources (devm_*(), etc) - Use dev_err_probe() for returning errors from .probe() - Add lots of Device Tree bindings / support - Improve cache efficiency by switching to Maple - Use own exported namespaces (NS) - Include missing and remove superfluous headers - Start using / convert to the new shutdown sys-off API - Trivial: variable / define renaming - Make use of of_property_read_reg() when requesting DT 'reg's Bug Fixes: - Fix chip revision readout due to incorrect data masking - Amend incorrect register and mask values used for charger state - Hide unused functionality at compile time - Fix resource leaks following error handling routines - Return correct error values and fix error handling in general - Repair incorrect device names - used for device matching - Remedy broken module auto-loading" * tag 'mfd-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (51 commits) dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540 iio: adc: max77541: Add ADI MAX77541 ADC Support regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator mfd: Switch two more drivers back to use struct i2c_driver::probe dt-bindings: mfd: samsung,s5m8767: Simplify excluding properties mfd: stmpe: Only disable the regulators if they are enabled mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support dt-bindings: mfd: gateworks-gsc: Remove unnecessary fan-controller nodes mfd: core: Use of_property_read_reg() to parse "reg" mfd: stmfx: Nullify stmfx->vdd in case of error mfd: stmfx: Fix error path in stmfx_chip_init mfd: intel-lpss: Add missing check for platform_get_resource mfd: stpmic1: Add PMIC poweroff via sys-off handler mfd: stpmic1: Fixup main control register and bits naming dt-bindings: mfd: qcom,tcsr: Add the compatible for IPQ8074 mfd: tps65219: Add support for soft shutdown via sys-off API mfd: pm8008: Drop bogus i2c module alias mfd: pm8008: Fix module autoloading mfd: tps65219: Add GPIO cell instance ...
The COMMON_CLK config is not enabled in some of the architectures. This causes build issues. Fix these issues by adding build dependency. ERROR: modpost: "clk_unregister_fixed_rate" [drivers/regulator/raa215300.ko] undefined! ERROR: modpost: "clk_register_fixed_rate" [drivers/regulator/raa215300.ko] undefined! Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306282012.sPQAuAN7-lkp@intel.com/ Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230628174004.63984-1-biju.das.jz@bp.renesas.com Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
Regulator driver for both MAX77541 and MAX77540. The MAX77541 is a high-efficiency step-down converter with two 3A switching phases for single-cell Li+ battery and 5VDC systems. The MAX77540 is a high-efficiency step-down converter with two 3A switching phases. Signed-off-by: Okan Sahin <okan.sahin@analog.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230412111256.40013-3-okan.sahin@analog.com Signed-off-by: Lee Jones <lee@kernel.org>
Merge series from Biju Das <biju.das.jz@bp.renesas.com>: This patch series aims to add support for Renesas PMIC RAA215300 and built-in RTC found on this PMIC device. The details of PMIC can be found here[1]. Renesas PMIC RAA215300 exposes two separate i2c devices, one for the main device and another for rtc device.