[ Upstream commit 8d8e16592022c9650df8aedfe6552ed478d7135b ]

By using a ratio of delay to poll_enabled_time that is not integer
time_remaining underflows and does not exit the loop as expected.
As delay could be derived from DT and poll_enabled_time is defined
in the driver this can easily happen.

Use a signed iterator to make sure that the loop exits once
the remaining time is negative.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://lore.kernel.org/r/20220909125954.577669-1-patrick.rudolph@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 8478ed5844588703a1a4c96a004b1525fbdbdd5e upstream.

On recent kernels, the PM8058 L16 (or any other PM8058 LDO-regulator)
does not come up if they are supplied by an SMPS-regulator. This
is not very strange since the regulators are registered in a long
array and the L-regulators are registered before the S-regulators,
and if an L-regulator defers, it will never get around to registering
the S-regulator that it needs.

See arch/arm/boot/dts/qcom-apq8060-dragonboard.dts:

pm8058-regulators {
    (...)
    vdd_l13_l16-supply = <&pm8058_s4>;
    (...)

Ooops.

Fix this by moving the PM8058 S-regulators first in the array.

Do the same for the PM8901 S-regulators (though this is currently
not causing any problems with out device trees) so that the pattern
of registration order is the same on all PMnnnn chips.

Fixes: 087a1b5cdd55 ("regulator: qcom: Rework to single platform device")
Cc: stable@vger.kernel.org
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220909112529.239143-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull regulator fixes from Mark Brown:
 "One core fix here improving the error handling on enable failure, plus
  smaller fixes for the pfuze100 drive and the SPMI DT bindings"

* tag 'regulator-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: Fix qcom,spmi-regulator schema
  regulator: pfuze100: Fix the global-out-of-bounds access in pfuze100_regulator_probe()
  regulator: core: Clean up on enable failure

The pfuze_chip::regulator_descs is an array of size
PFUZE100_MAX_REGULATOR, the pfuze_chip::pfuze_regulators
is the pointer to the real regulators of a specific device.
The number of real regulator is supposed to be less than
the PFUZE100_MAX_REGULATOR, so we should use the size of
'regulator_num * sizeof(struct pfuze_regulator)' in memcpy().
This fixes the out of bounds access bug reported by KASAN.

Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20220825111922.1368055-1-xiaolei.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>

If regulator_enable() fails, enable_count is incremented still.
A consumer, assuming no matching regulator_disable() is necessary on
failure, will then get this error message upon regulator_put()
since enable_count is non-zero:

    [    1.277418] WARNING: CPU: 3 PID: 1 at drivers/regulator/core.c:2304 _regulator_put.part.0+0x168/0x170

The consumer could try to fix this in their driver by cleaning up on
error from regulator_enable() (i.e. call regulator_disable()), but that
results in the following since regulator_enable() failed and didn't
increment user_count:

    [    1.258112] unbalanced disables for vreg_l17c
    [    1.262606] WARNING: CPU: 4 PID: 1 at drivers/regulator/core.c:2899 _regulator_disable+0xd4/0x190

Fix this by decrementing enable_count upon failure to enable.

With this in place, just the reason for failure to enable is printed
as expected and developers can focus on the root cause of their issue
instead of thinking their usage of the regulator consumer api is
incorrect. For example, in my case:

    [    1.240426] vreg_l17c: invalid input voltage found

Fixes: 5451781dadf8 ("regulator: core: Only count load for enabled consumers")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20220819194336.382740-1-ahalaney@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Pull regulator fixes from Mark Brown:
 "A couple of small fixes that came in since my pull request, nothing
  major here"

* tag 'regulator-fix-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: core: Fix missing error return from regulator_bulk_get()
  regulator: pca9450: Remove restrictions for regulator-name

In commit 6eabfc018e8d ("regulator: core: Allow specifying an initial
load w/ the bulk API") I changed the error handling but had a subtle
that caused us to always return no error even if there was an
error. Fix it.

Fixes: 6eabfc018e8d ("regulator: core: Allow specifying an initial load w/ the bulk API")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220809142738.1.I91625242f137c707bb345c51c80c5ecee02eeff3@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>

Pull chrome platform updates from Tzung-Bi Shih:
 "cros_ec_proto:
   - Leverage Kunit and add Kunit test cases
   - Clean-ups
   - Fix typo

  cros_ec_commands:
   - Fix typo
   - Fix compile errors

  cros_kbd_led_backlight:
   - Support OF match
   - Support EC PWM backend

  cros_ec:
   - Always expose the last resume result to fix sleep hang detection on
     ARM-based chromebooks

  wilco_ec:
   - Fix typo

  cros_ec_typec:
   - Clean-ups
   - Use Type-C framework utilities to manage altmode structs"

* tag 'tag-chrome-platform-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (59 commits)
  platform/chrome: cros_kunit_util: add default value for `msg->result`
  platform/chrome: merge Kunit utils and test cases
  platform/chrome: cros_kbd_led_backlight: fix build warning
  platform/chrome: cros_ec_proto: add Kunit test for cros_ec_cmd()
  platform/chrome: cros_ec_proto: add Kunit tests for get_sensor_count
  platform/chrome: cros_ec_proto: add Kunit tests for check_features
  platform/chrome: cros_ec_proto: add Kunit tests for get_host_event
  platform/chrome: cros_ec_proto: add Kunit tests for get_next_event
  platform/chrome: cros_ec_proto: add Kunit test for cros_ec_map_error()
  platform/chrome: cros_ec_proto: add Kunit tests for cmd_xfer_status
  platform/chrome: cros_ec_proto: return -EPROTO if empty payload
  platform/chrome: cros_ec_proto: add Kunit test for empty payload
  platform/chrome: cros_ec_proto: return -EAGAIN when retries timed out
  platform/chrome: cros_ec_proto: change Kunit expectation when timed out
  platform/chrome: cros_ec_proto: separate cros_ec_wait_until_complete()
  platform/chrome: cros_ec_proto: separate cros_ec_xfer_command()
  platform/chrome: cros_ec_proto: add Kunit tests for cros_ec_send_command()
  platform/chrome: cros_ec_proto: add Kunit tests for cros_ec_cmd_xfer()
  platform/chrome: cros_ec_proto: add "cros_ec_" prefix to send_command()
  platform/chrome: cros_ec_typec: Register port altmodes
  ...

Pull SPDX updates from Greg KH:
 "Here is the set of SPDX comment updates for 6.0-rc1.

  Nothing huge here, just a number of updated SPDX license tags and
  cleanups based on the review of a number of common patterns in GPLv2
  boilerplate text.

  Also included in here are a few other minor updates, two USB files,
  and one Documentation file update to get the SPDX lines correct.

  All of these have been in the linux-next tree for a very long time"

* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
  Documentation: samsung-s3c24xx: Add blank line after SPDX directive
  x86/crypto: Remove stray comment terminator
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
  ...

Merge series from Douglas Anderson <dianders@chromium.org>:

The main goal of this series is to make a small dent in cleaning up
the way we deal with regulator loads. The idea is to add some extra
functionality to the regulator "bulk" API so that consumers can
specify the load using that.