linux-stable.git/drivers/regulator, branch v5.0.9 Linux kernel stable tree regulator: act8865: Fix act8600_sudcdc_voltage_ranges setting 2019-04-05T20:34:51+00:00 Axel Lin axel.lin@ingics.com 2019-01-10T09:26:16+00:00 1048bfd8bf67f889efd67090fdf08489a835a06b [ Upstream commit f01a7beb6791f1c419424c1a6958b7d0a289c974 ] The act8600_sudcdc_voltage_ranges setting does not match the datasheet. The problems in below entry: REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000), 1. The off-by-one min_sel causes wrong volatage calculation. The min_sel should be 192. 2. According to the datasheet[1] Table 7. (on page 43): The selector 248 (0b11111000) ~ 255 (0b11111111) are 41.400V. Also fix off-by-one for ACT8600_SUDCDC_VOLTAGE_NUM. [1] https://active-semi.com/wp-content/uploads/ACT8600_Datasheet.pdf Fixes: df3a950e4e73 ("regulator: act8865: Add act8600 support") Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f01a7beb6791f1c419424c1a6958b7d0a289c974 ]

The act8600_sudcdc_voltage_ranges setting does not match the datasheet.

The problems in below entry:
  REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000),

1. The off-by-one min_sel causes wrong volatage calculation.
   The min_sel should be 192.
2. According to the datasheet[1] Table 7. (on page 43):
   The selector 248 (0b11111000) ~ 255 (0b11111111) are 41.400V.

Also fix off-by-one for ACT8600_SUDCDC_VOLTAGE_NUM.

[1] https://active-semi.com/wp-content/uploads/ACT8600_Datasheet.pdf

Fixes: df3a950e4e73 ("regulator: act8865: Add act8600 support")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
regulator: mcp16502: Include linux/gpio/consumer.h to fix build error 2019-04-05T20:34:47+00:00 Axel Lin axel.lin@ingics.com 2019-01-27T08:51:22+00:00 bce56838a25d9fd4aade72874e28c741d7cc9c14 [ Upstream commit f3c6a1a194317f3a31ee2b2067bb0a41de64bc8b ] Fix below build error: drivers/regulator/mcp16502.c: In function ‘mcp16502_gpio_set_mode’: drivers/regulator/mcp16502.c:135:3: error: implicit declaration of function ‘gpiod_set_value’; did you mean ‘gpio_set_value’? [-Werror=implicit-function-declaration] gpiod_set_value(mcp->lpm, 0); ^~~~~~~~~~~~~~~ gpio_set_value drivers/regulator/mcp16502.c: In function ‘mcp16502_probe’: drivers/regulator/mcp16502.c:486:13: error: implicit declaration of function ‘devm_gpiod_get’; did you mean ‘devm_gpio_free’? [-Werror=implicit-function-declaration] mcp->lpm = devm_gpiod_get(dev, "lpm", GPIOD_OUT_LOW); ^~~~~~~~~~~~~~ devm_gpio_free drivers/regulator/mcp16502.c:486:40: error: ‘GPIOD_OUT_LOW’ undeclared (first use in this function); did you mean ‘GPIOF_INIT_LOW’? mcp->lpm = devm_gpiod_get(dev, "lpm", GPIOD_OUT_LOW); ^~~~~~~~~~~~~ GPIOF_INIT_LOW Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f3c6a1a194317f3a31ee2b2067bb0a41de64bc8b ]

Fix below build error:
drivers/regulator/mcp16502.c: In function ‘mcp16502_gpio_set_mode’:
drivers/regulator/mcp16502.c:135:3: error: implicit declaration of function ‘gpiod_set_value’; did you mean ‘gpio_set_value’? [-Werror=implicit-function-declaration]
   gpiod_set_value(mcp->lpm, 0);
   ^~~~~~~~~~~~~~~
   gpio_set_value
drivers/regulator/mcp16502.c: In function ‘mcp16502_probe’:
drivers/regulator/mcp16502.c:486:13: error: implicit declaration of function ‘devm_gpiod_get’; did you mean ‘devm_gpio_free’? [-Werror=implicit-function-declaration]
  mcp->lpm = devm_gpiod_get(dev, "lpm", GPIOD_OUT_LOW);
             ^~~~~~~~~~~~~~
             devm_gpio_free
drivers/regulator/mcp16502.c:486:40: error: ‘GPIOD_OUT_LOW’ undeclared (first use in this function); did you mean ‘GPIOF_INIT_LOW’?
  mcp->lpm = devm_gpiod_get(dev, "lpm", GPIOD_OUT_LOW);
                                        ^~~~~~~~~~~~~
                                        GPIOF_INIT_LOW

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
regulator: core: Take lock before applying system load 2019-04-05T20:34:36+00:00 Niklas Cassel niklas.cassel@linaro.org 2019-02-15T10:55:33+00:00 9489ac42680c7dc5ea1a4410bf136336397b1fee [ Upstream commit e5e21f70bfd3a201e627b48aed82793d1bcd6f78 ] Take the regulator lock before applying system load. Fixes the following lockdep splat: [ 5.583581] WARNING: CPU: 1 PID: 16 at drivers/regulator/core.c:925 drms_uA_update+0x114/0x360 [ 5.588467] Modules linked in: [ 5.596833] CPU: 1 PID: 16 Comm: kworker/1:0 Not tainted 5.0.0-rc6-next-20190213-00002-g0fce66ab480f #18 [ 5.599933] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 5.609544] Workqueue: events qcom_channel_state_worker [ 5.616209] pstate: 60000005 (nZCv daif -PAN -UAO) [ 5.621152] pc : drms_uA_update+0x114/0x360 [ 5.626006] lr : drms_uA_update+0x110/0x360 [ 5.630084] sp : ffff0000124b3490 [ 5.634242] x29: ffff0000124b3490 x28: ffff800005326e00 [ 5.637735] x27: ffff0000124b35f8 x26: 000000000032bc48 [ 5.643117] x25: ffff800004c7e800 x24: ffff800004c6d500 [ 5.648411] x23: ffff800004c38a80 x22: 00000000000000d1 [ 5.653706] x21: 00000000001ab3f0 x20: ffff800004c7e800 [ 5.659001] x19: ffff0000114c3000 x18: ffffffffffffffff [ 5.664297] x17: 0000000000000000 x16: 0000000000000000 [ 5.669592] x15: ffff0000114c3808 x14: 0720072007200720 [ 5.674888] x13: 00000000199c9b28 x12: ffff80002bcccc40 [ 5.680183] x11: ffff000012286000 x10: ffff0000114c3808 [ 5.685477] x9 : 0720072007200720 x8 : ffff000010e9e808 [ 5.690772] x7 : ffff0000106da568 x6 : 0000000000000000 [ 5.696067] x5 : 0000000000000000 x4 : 0000000000000000 [ 5.701362] x3 : 0000000000000004 x2 : 0000000000000000 [ 5.706658] x1 : 0000000000000000 x0 : 0000000000000000 [ 5.711952] Call trace: [ 5.717223] drms_uA_update+0x114/0x360 [ 5.719405] regulator_register+0xb30/0x1140 [ 5.723230] devm_regulator_register+0x4c/0xa8 [ 5.727745] rpm_reg_probe+0xfc/0x1b0 [ 5.731992] platform_drv_probe+0x50/0xa0 [ 5.735727] really_probe+0x20c/0x2b8 [ 5.739718] driver_probe_device+0x58/0x100 [ 5.743368] __device_attach_driver+0x90/0xd0 [ 5.747363] bus_for_each_drv+0x64/0xc8 [ 5.751870] __device_attach+0xd8/0x138 [ 5.755516] device_initial_probe+0x10/0x18 [ 5.759341] bus_probe_device+0x98/0xa0 [ 5.763502] device_add+0x3d0/0x640 [ 5.767319] of_device_add+0x48/0x58 [ 5.770793] of_platform_device_create_pdata+0xb0/0x128 [ 5.774629] of_platform_bus_create+0x174/0x370 [ 5.779569] of_platform_populate+0x78/0xe0 [ 5.784082] qcom_smd_rpm_probe+0x80/0xa0 [ 5.788245] rpmsg_dev_probe+0x114/0x1a0 [ 5.792411] really_probe+0x20c/0x2b8 [ 5.796401] driver_probe_device+0x58/0x100 [ 5.799964] __device_attach_driver+0x90/0xd0 [ 5.803960] bus_for_each_drv+0x64/0xc8 [ 5.808468] __device_attach+0xd8/0x138 [ 5.812115] device_initial_probe+0x10/0x18 [ 5.815936] bus_probe_device+0x98/0xa0 [ 5.820099] device_add+0x3d0/0x640 [ 5.823916] device_register+0x1c/0x28 [ 5.827391] rpmsg_register_device+0x4c/0x90 [ 5.831216] qcom_channel_state_worker+0x170/0x298 [ 5.835651] process_one_work+0x294/0x6e8 [ 5.840241] worker_thread+0x40/0x450 [ 5.844318] kthread+0x11c/0x120 [ 5.847961] ret_from_fork+0x10/0x18 [ 5.851260] irq event stamp: 9090 [ 5.854820] hardirqs last enabled at (9089): [<ffff000010160798>] console_unlock+0x3e0/0x5b0 [ 5.858086] hardirqs last disabled at (9090): [<ffff0000100817cc>] do_debug_exception+0x104/0x140 [ 5.866596] softirqs last enabled at (9086): [<ffff000010082024>] __do_softirq+0x474/0x574 [ 5.875446] softirqs last disabled at (9079): [<ffff0000100f2254>] irq_exit+0x13c/0x148 [ 5.883598] ---[ end trace 6984ef7f081afa21 ]--- Fixes: fa94e48e13a1 ("regulator: core: Apply system load even if no consumer loads") Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e5e21f70bfd3a201e627b48aed82793d1bcd6f78 ]

Take the regulator lock before applying system load.

Fixes the following lockdep splat:

[    5.583581] WARNING: CPU: 1 PID: 16 at drivers/regulator/core.c:925 drms_uA_update+0x114/0x360
[    5.588467] Modules linked in:
[    5.596833] CPU: 1 PID: 16 Comm: kworker/1:0 Not tainted 5.0.0-rc6-next-20190213-00002-g0fce66ab480f #18
[    5.599933] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    5.609544] Workqueue: events qcom_channel_state_worker
[    5.616209] pstate: 60000005 (nZCv daif -PAN -UAO)
[    5.621152] pc : drms_uA_update+0x114/0x360
[    5.626006] lr : drms_uA_update+0x110/0x360
[    5.630084] sp : ffff0000124b3490
[    5.634242] x29: ffff0000124b3490 x28: ffff800005326e00
[    5.637735] x27: ffff0000124b35f8 x26: 000000000032bc48
[    5.643117] x25: ffff800004c7e800 x24: ffff800004c6d500
[    5.648411] x23: ffff800004c38a80 x22: 00000000000000d1
[    5.653706] x21: 00000000001ab3f0 x20: ffff800004c7e800
[    5.659001] x19: ffff0000114c3000 x18: ffffffffffffffff
[    5.664297] x17: 0000000000000000 x16: 0000000000000000
[    5.669592] x15: ffff0000114c3808 x14: 0720072007200720
[    5.674888] x13: 00000000199c9b28 x12: ffff80002bcccc40
[    5.680183] x11: ffff000012286000 x10: ffff0000114c3808
[    5.685477] x9 : 0720072007200720 x8 : ffff000010e9e808
[    5.690772] x7 : ffff0000106da568 x6 : 0000000000000000
[    5.696067] x5 : 0000000000000000 x4 : 0000000000000000
[    5.701362] x3 : 0000000000000004 x2 : 0000000000000000
[    5.706658] x1 : 0000000000000000 x0 : 0000000000000000
[    5.711952] Call trace:
[    5.717223]  drms_uA_update+0x114/0x360
[    5.719405]  regulator_register+0xb30/0x1140
[    5.723230]  devm_regulator_register+0x4c/0xa8
[    5.727745]  rpm_reg_probe+0xfc/0x1b0
[    5.731992]  platform_drv_probe+0x50/0xa0
[    5.735727]  really_probe+0x20c/0x2b8
[    5.739718]  driver_probe_device+0x58/0x100
[    5.743368]  __device_attach_driver+0x90/0xd0
[    5.747363]  bus_for_each_drv+0x64/0xc8
[    5.751870]  __device_attach+0xd8/0x138
[    5.755516]  device_initial_probe+0x10/0x18
[    5.759341]  bus_probe_device+0x98/0xa0
[    5.763502]  device_add+0x3d0/0x640
[    5.767319]  of_device_add+0x48/0x58
[    5.770793]  of_platform_device_create_pdata+0xb0/0x128
[    5.774629]  of_platform_bus_create+0x174/0x370
[    5.779569]  of_platform_populate+0x78/0xe0
[    5.784082]  qcom_smd_rpm_probe+0x80/0xa0
[    5.788245]  rpmsg_dev_probe+0x114/0x1a0
[    5.792411]  really_probe+0x20c/0x2b8
[    5.796401]  driver_probe_device+0x58/0x100
[    5.799964]  __device_attach_driver+0x90/0xd0
[    5.803960]  bus_for_each_drv+0x64/0xc8
[    5.808468]  __device_attach+0xd8/0x138
[    5.812115]  device_initial_probe+0x10/0x18
[    5.815936]  bus_probe_device+0x98/0xa0
[    5.820099]  device_add+0x3d0/0x640
[    5.823916]  device_register+0x1c/0x28
[    5.827391]  rpmsg_register_device+0x4c/0x90
[    5.831216]  qcom_channel_state_worker+0x170/0x298
[    5.835651]  process_one_work+0x294/0x6e8
[    5.840241]  worker_thread+0x40/0x450
[    5.844318]  kthread+0x11c/0x120
[    5.847961]  ret_from_fork+0x10/0x18
[    5.851260] irq event stamp: 9090
[    5.854820] hardirqs last  enabled at (9089): [<ffff000010160798>] console_unlock+0x3e0/0x5b0
[    5.858086] hardirqs last disabled at (9090): [<ffff0000100817cc>] do_debug_exception+0x104/0x140
[    5.866596] softirqs last  enabled at (9086): [<ffff000010082024>] __do_softirq+0x474/0x574
[    5.875446] softirqs last disabled at (9079): [<ffff0000100f2254>] irq_exit+0x13c/0x148
[    5.883598] ---[ end trace 6984ef7f081afa21 ]---

Fixes: fa94e48e13a1 ("regulator: core: Apply system load even if no consumer loads")
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
regulator: s2mpa01: Fix step values for some LDOs 2019-03-23T19:11:19+00:00 Stuart Menefy stuart.menefy@mathembedded.com 2019-02-12T21:51:18+00:00 6b65a01d2dcc6ff096d5db0d9ced5354b5b86a52 commit 28c4f730d2a44f2591cb104091da29a38dac49fe upstream. The step values for some of the LDOs appears to be incorrect, resulting in incorrect voltages (or at least, ones which are different from the Samsung 3.4 vendor kernel). Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 28c4f730d2a44f2591cb104091da29a38dac49fe upstream.

The step values for some of the LDOs appears to be incorrect, resulting
in incorrect voltages (or at least, ones which are different from the
Samsung 3.4 vendor kernel).

Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
regulator: max77620: Initialize values for DT properties 2019-03-23T19:11:19+00:00 Mark Zhang markz@nvidia.com 2019-01-10T04:11:16+00:00 60cb8b444fbf641b8ca36be3a6f99e51d3e213f6 commit 0ab66b3c326ef8f77dae9f528118966365757c0c upstream. If regulator DT node doesn't exist, its of_parse_cb callback function isn't called. Then all values for DT properties are filled with zero. This leads to wrong register update for FPS and POK settings. Signed-off-by: Jinyoung Park <jinyoungp@nvidia.com> Signed-off-by: Mark Zhang <markz@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0ab66b3c326ef8f77dae9f528118966365757c0c upstream.

If regulator DT node doesn't exist, its of_parse_cb callback
function isn't called. Then all values for DT properties are
filled with zero. This leads to wrong register update for
FPS and POK settings.

Signed-off-by: Jinyoung Park <jinyoungp@nvidia.com>
Signed-off-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
regulator: s2mps11: Fix steps for buck7, buck8 and LDO35 2019-03-23T19:11:19+00:00 Krzysztof Kozlowski krzk@kernel.org 2019-02-09T17:14:14+00:00 4527a24a8f518edf6ad8f74c0ca4fdf6f027b2ad commit 56b5d4ea778c1b0989c5cdb5406d4a488144c416 upstream. LDO35 uses 25 mV step, not 50 mV. Bucks 7 and 8 use 12.5 mV step instead of 6.25 mV. Wrong step caused over-voltage (LDO35) or under-voltage (buck7 and 8) if regulators were used (e.g. on Exynos5420 Arndale Octa board). Cc: <stable@vger.kernel.org> Fixes: cb74685ecb39 ("regulator: s2mps11: Add samsung s2mps11 regulator driver") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 56b5d4ea778c1b0989c5cdb5406d4a488144c416 upstream.

LDO35 uses 25 mV step, not 50 mV.  Bucks 7 and 8 use 12.5 mV step
instead of 6.25 mV.  Wrong step caused over-voltage (LDO35) or
under-voltage (buck7 and 8) if regulators were used (e.g. on Exynos5420
Arndale Octa board).

Cc: <stable@vger.kernel.org>
Fixes: cb74685ecb39 ("regulator: s2mps11: Add samsung s2mps11 regulator driver")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge remote-tracking branch 'regulator/topic/coupled' into regulator-next 2018-12-21T13:43:35+00:00 Mark Brown broonie@kernel.org 2018-12-21T13:43:35+00:00 c3b5725965228014215de553eed3492dbd80a4bd 






regulator: tps65910: fix a missing check of return value
2018-12-21T11:04:59+00:00

Kangjie Lu
kjlu@umn.edu

2018-12-21T06:29:19+00:00

cd07e3701fa6a4c68f8493ee1d12caa18d46ec6a

tps65910_reg_set_bits() may fail. The fix checks if it fails, and if so,
returns with its error code.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Mark Brown <broonie@kernel.org>





tps65910_reg_set_bits() may fail. The fix checks if it fails, and if so,
returns with its error code.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Mark Brown <broonie@kernel.org>







regulator: mcp16502: Select REGMAP_I2C to fix build error
2018-12-21T11:02:24+00:00

Axel Lin
axel.lin@ingics.com

2018-12-21T02:49:29+00:00

77ea906082dcfa63ad8a07ace6d5033d30c4175b

Fix build error when CONFIG_REGMAP_I2C=m && CONFIG_REGULATOR_MCP16502=y.

drivers/regulator/mcp16502.o: In function `mcp16502_probe':
mcp16502.c:(.text+0xca): undefined reference to `__devm_regmap_init_i2c'

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>





Fix build error when CONFIG_REGMAP_I2C=m && CONFIG_REGULATOR_MCP16502=y.

drivers/regulator/mcp16502.o: In function `mcp16502_probe':
mcp16502.c:(.text+0xca): undefined reference to `__devm_regmap_init_i2c'

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>







regulator: convert to DEFINE_SHOW_ATTRIBUTE
2018-12-20T14:38:42+00:00

Yangtao Li
tiny.windzz@gmail.com

2018-12-15T08:21:48+00:00

3e60b4fc86710cd2095628c67b296e7cc4b239c1

Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>





Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>