linux-stable.git/drivers/regulator, branch v4.14.166 Linux kernel stable tree regulator: rn5t618: fix module aliases 2020-01-12T11:11:58+00:00 Andreas Kemnade andreas@kemnade.info 2019-12-11T22:16:00+00:00 2dfde10dda0e0939ae4f29aff02327962f9ef9f3 [ Upstream commit 62a1923cc8fe095912e6213ed5de27abbf1de77e ] platform device aliases were missing, preventing autoloading of module. Fixes: 811b700630ff ("regulator: rn5t618: add driver for Ricoh RN5T618 regulators") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20191211221600.29438-1-andreas@kemnade.info Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 62a1923cc8fe095912e6213ed5de27abbf1de77e ]

platform device aliases were missing, preventing
autoloading of module.

Fixes: 811b700630ff ("regulator: rn5t618: add driver for Ricoh RN5T618 regulators")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20191211221600.29438-1-andreas@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
regulator: ab8500: Remove AB8505 USB regulator 2020-01-09T09:17:58+00:00 Stephan Gerhold stephan@gerhold.net 2019-11-06T17:31:24+00:00 0902316524bf0d0e6de17263f9e02a3dd4e1d0ae commit 99c4f70df3a6446c56ca817c2d0f9c12d85d4e7c upstream. The USB regulator was removed for AB8500 in commit 41a06aa738ad ("regulator: ab8500: Remove USB regulator"). It was then added for AB8505 in commit 547f384f33db ("regulator: ab8500: add support for ab8505"). However, there was never an entry added for it in ab8505_regulator_match. This causes all regulators after it to be initialized with the wrong device tree data, eventually leading to an out-of-bounds array read. Given that it is not used anywhere in the kernel, it seems likely that similar arguments against supporting it exist for AB8505 (it is controlled by hardware). Therefore, simply remove it like for AB8500 instead of adding an entry in ab8505_regulator_match. Fixes: 547f384f33db ("regulator: ab8500: add support for ab8505") Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191106173125.14496-1-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 99c4f70df3a6446c56ca817c2d0f9c12d85d4e7c upstream.

The USB regulator was removed for AB8500 in
commit 41a06aa738ad ("regulator: ab8500: Remove USB regulator").
It was then added for AB8505 in
commit 547f384f33db ("regulator: ab8500: add support for ab8505").

However, there was never an entry added for it in
ab8505_regulator_match. This causes all regulators after it
to be initialized with the wrong device tree data, eventually
leading to an out-of-bounds array read.

Given that it is not used anywhere in the kernel, it seems
likely that similar arguments against supporting it exist for
AB8505 (it is controlled by hardware).

Therefore, simply remove it like for AB8500 instead of adding
an entry in ab8505_regulator_match.

Fixes: 547f384f33db ("regulator: ab8500: add support for ab8505")
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191106173125.14496-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
regulator: max8907: Fix the usage of uninitialized variable in max8907_regulator_probe() 2019-12-31T11:36:58+00:00 Yizhuo yzhai003@ucr.edu 2019-10-03T17:58:13+00:00 d8233bd84b2ba05aeb8739bd394c65b5f9168c02 [ Upstream commit 472b39c3d1bba0616eb0e9a8fa3ad0f56927c7d7 ] Inside function max8907_regulator_probe(), variable val could be uninitialized if regmap_read() fails. However, val is used later in the if statement to decide the content written to "pmic", which is potentially unsafe. Signed-off-by: Yizhuo <yzhai003@ucr.edu> Link: https://lore.kernel.org/r/20191003175813.16415-1-yzhai003@ucr.edu Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 472b39c3d1bba0616eb0e9a8fa3ad0f56927c7d7 ]

Inside function max8907_regulator_probe(), variable val could
be uninitialized if regmap_read() fails. However, val is used
later in the if statement to decide the content written to
"pmic", which is potentially unsafe.

Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Link: https://lore.kernel.org/r/20191003175813.16415-1-yzhai003@ucr.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Revert "regulator: Defer init completion for a while after late_initcall" 2019-12-21T09:47:40+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2019-12-18T14:10:24+00:00 350a0cba90e1bd40b1fe5b396923d2f3a61d1056 This reverts commit d7ce17fba6c8e316ca9a554a87edddce6f862435 which is commit 55576cf1853798e86f620766e23b604c9224c19c upstream. It's causing "odd" interactions with older kernels, so it probably isn't a good idea to cause timing changes there. This has been reported to cause oopses on Pixel devices. Reported-by: Siddharth Kapoor <ksiddharth@google.com> Cc: Mark Brown <broonie@kernel.org> Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This reverts commit d7ce17fba6c8e316ca9a554a87edddce6f862435 which is
commit 55576cf1853798e86f620766e23b604c9224c19c upstream.

It's causing "odd" interactions with older kernels, so it probably isn't
a good idea to cause timing changes there.  This has been reported to
cause oopses on Pixel devices.

Reported-by: Siddharth Kapoor <ksiddharth@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
regulator: tps65910: fix a missing check of return value 2019-12-05T14:37:47+00:00 Kangjie Lu kjlu@umn.edu 2018-12-21T06:29:19+00:00 2a8fb5b9fd37157b5017e1a8a5a6fe7946aa4df6 [ Upstream commit cd07e3701fa6a4c68f8493ee1d12caa18d46ec6a ] tps65910_reg_set_bits() may fail. The fix checks if it fails, and if so, returns with its error code. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit cd07e3701fa6a4c68f8493ee1d12caa18d46ec6a ]

tps65910_reg_set_bits() may fail. The fix checks if it fails, and if so,
returns with its error code.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/regulator: fix a missing check of return value 2019-12-05T14:37:36+00:00 Kangjie Lu kjlu@umn.edu 2018-12-19T05:04:13+00:00 b63cd67875dda7d041f0febc2bb5453361b8b101 [ Upstream commit 966e927bf8cc6a44f8b72582a1d6d3ffc73b12ad ] If palmas_smps_read() fails, we should not use the read data in "reg" which may contain random value. The fix inserts a check for the return value of palmas_smps_read(): If it fails, we return the error code upstream and stop using "reg". Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 966e927bf8cc6a44f8b72582a1d6d3ffc73b12ad ]

If palmas_smps_read() fails, we should not use the read data in "reg"
which may contain random value. The fix inserts a check for the return
value of palmas_smps_read(): If it fails, we return the error code
upstream and stop using "reg".

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
regulator: pfuze100-regulator: Variable "val" in pfuze100_regulator_probe() could be uninitialized 2019-11-10T10:25:05+00:00 Yizhuo yzhai003@ucr.edu 2019-09-29T17:09:57+00:00 e48c52747169e4a98a8efe589a24dfb7a08f704b [ Upstream commit 1252b283141f03c3dffd139292c862cae10e174d ] In function pfuze100_regulator_probe(), variable "val" could be initialized if regmap_read() fails. However, "val" is used to decide the control flow later in the if statement, which is potentially unsafe. Signed-off-by: Yizhuo <yzhai003@ucr.edu> Link: https://lore.kernel.org/r/20190929170957.14775-1-yzhai003@ucr.edu Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1252b283141f03c3dffd139292c862cae10e174d ]

In function pfuze100_regulator_probe(), variable "val" could be
initialized if regmap_read() fails. However, "val" is used to
decide the control flow later in the if statement, which is
potentially unsafe.

Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Link: https://lore.kernel.org/r/20190929170957.14775-1-yzhai003@ucr.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
regulator: ti-abb: Fix timeout in ti_abb_wait_txdone/ti_abb_clear_all_txdone 2019-11-10T10:25:04+00:00 Axel Lin axel.lin@ingics.com 2019-09-29T09:58:48+00:00 16bacd2121cd91a92fbe0e2479dc71a31946e437 [ Upstream commit f64db548799e0330897c3203680c2ee795ade518 ] ti_abb_wait_txdone() may return -ETIMEDOUT when ti_abb_check_txdone() returns true in the latest iteration of the while loop because the timeout value is abb->settling_time + 1. Similarly, ti_abb_clear_all_txdone() may return -ETIMEDOUT when ti_abb_check_txdone() returns false in the latest iteration of the while loop. Fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20190929095848.21960-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f64db548799e0330897c3203680c2ee795ade518 ]

ti_abb_wait_txdone() may return -ETIMEDOUT when ti_abb_check_txdone()
returns true in the latest iteration of the while loop because the timeout
value is abb->settling_time + 1. Similarly, ti_abb_clear_all_txdone() may
return -ETIMEDOUT when ti_abb_check_txdone() returns false in the latest
iteration of the while loop. Fix it.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20190929095848.21960-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
regulator: Defer init completion for a while after late_initcall 2019-10-05T10:48:08+00:00 Mark Brown broonie@kernel.org 2019-09-04T12:42:50+00:00 d7ce17fba6c8e316ca9a554a87edddce6f862435 commit 55576cf1853798e86f620766e23b604c9224c19c upstream. The kernel has no way of knowing when we have finished instantiating drivers, between deferred probe and systems that build key drivers as modules we might be doing this long after userspace has booted. This has always been a bit of an issue with regulator_init_complete since it can power off hardware that's not had it's driver loaded which can result in user visible effects, the main case is powering off displays. Practically speaking it's not been an issue in real systems since most systems that use the regulator API are embedded and build in key drivers anyway but with Arm laptops coming on the market it's becoming more of an issue so let's do something about it. In the absence of any better idea just defer the powering off for 30s after late_initcall(), this is obviously a hack but it should mask the issue for now and it's no more arbitrary than late_initcall() itself. Ideally we'd have some heuristics to detect if we're on an affected system and tune or skip the delay appropriately, and there may be some need for a command line option to be added. Link: https://lore.kernel.org/r/20190904124250.25844-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Tested-by: Lee Jones <lee.jones@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 55576cf1853798e86f620766e23b604c9224c19c upstream.

The kernel has no way of knowing when we have finished instantiating
drivers, between deferred probe and systems that build key drivers as
modules we might be doing this long after userspace has booted. This has
always been a bit of an issue with regulator_init_complete since it can
power off hardware that's not had it's driver loaded which can result in
user visible effects, the main case is powering off displays. Practically
speaking it's not been an issue in real systems since most systems that
use the regulator API are embedded and build in key drivers anyway but
with Arm laptops coming on the market it's becoming more of an issue so
let's do something about it.

In the absence of any better idea just defer the powering off for 30s
after late_initcall(), this is obviously a hack but it should mask the
issue for now and it's no more arbitrary than late_initcall() itself.
Ideally we'd have some heuristics to detect if we're on an affected
system and tune or skip the delay appropriately, and there may be some
need for a command line option to be added.

Link: https://lore.kernel.org/r/20190904124250.25844-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Lee Jones <lee.jones@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
regulator: lm363x: Fix off-by-one n_voltages for lm3632 ldo_vpos/ldo_vneg 2019-10-05T10:47:44+00:00 Axel Lin axel.lin@ingics.com 2019-06-26T13:26:31+00:00 14c28fad8a52f0bf556e81529b37924bbd8b5998 [ Upstream commit 1e2cc8c5e0745b545d4974788dc606d678b6e564 ] According to the datasheet https://www.ti.com/lit/ds/symlink/lm3632a.pdf Table 20. VPOS Bias Register Field Descriptions VPOS[5:0] Sets the Positive Display Bias (LDO) Voltage (50 mV per step) 000000: 4 V 000001: 4.05 V 000010: 4.1 V .................... 011101: 5.45 V 011110: 5.5 V (Default) 011111: 5.55 V .................... 100111: 5.95 V 101000: 6 V Note: Codes 101001 to 111111 map to 6 V The LM3632_LDO_VSEL_MAX should be 0b101000 (0x28), so the maximum voltage can match the datasheet. Fixes: 3a8d1a73a037 ("regulator: add LM363X driver") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20190626132632.32629-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1e2cc8c5e0745b545d4974788dc606d678b6e564 ]

According to the datasheet https://www.ti.com/lit/ds/symlink/lm3632a.pdf
Table 20. VPOS Bias Register Field Descriptions VPOS[5:0]
Sets the Positive Display Bias (LDO) Voltage (50 mV per step)
000000: 4 V
000001: 4.05 V
000010: 4.1 V
....................
011101: 5.45 V
011110: 5.5 V (Default)
011111: 5.55 V
....................
100111: 5.95 V
101000: 6 V
Note: Codes 101001 to 111111 map to 6 V

The LM3632_LDO_VSEL_MAX should be 0b101000 (0x28), so the maximum voltage
can match the datasheet.

Fixes: 3a8d1a73a037 ("regulator: add LM363X driver")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20190626132632.32629-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>