commit a2262e5a12e05389ab4c7fc5cf60016b041dd8dc upstream.
The minium voltage of 1800mV is a copy and paste error from the axp20x
regulator info. The correct minimum voltage for the ldo_io regulators
on the axp22x is 700mV.
Fixes: 1b82b4e4f954 ("regulator: axp20x: Add support for AXP22X regulators")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b672623079bb3e5685b8549e514f2dfaa564406 upstream. The buck9 regulator of S2MPS11 PMIC had incorrect vsel_mask (0xff instead of 0x1f) thus reading entire register as buck9's voltage. This effectively caused regulator core to interpret values as higher voltages than they were and then to set real voltage much lower than intended. The buck9 provides power to other regulators, including LDO13 and LDO19 which supply the MMC2 (SD card). On Odroid XU3/XU4 the lower voltage caused SD card detection errors on Odroid XU3/XU4: mmc1: card never left busy state mmc1: error -110 whilst initialising SD card During driver probe the regulator core was checking whether initial voltage matches the constraints. With incorrect vsel_mask of 0xff and default value of 0x50, the core interpreted this as 5 V which is outside of constraints (3-3.775 V). Then the regulator core was adjusting the voltage to match the constraints. With incorrect vsel_mask this new voltage mapped to a vere low voltage in the driver. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e07ff9434167981c993a26d2edbbcb8e13801dbb upstream.
The s5m8767_pmic_probe() function calls s5m8767_get_register() to
read data without checking the return code, which produces a compile-time
warning when that data is accessed:
drivers/regulator/s5m8767.c: In function 's5m8767_pmic_probe':
drivers/regulator/s5m8767.c:924:7: error: 'enable_reg' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/regulator/s5m8767.c:944:30: error: 'enable_val' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This changes the s5m8767_get_register() function to return a -EINVAL
not just for an invalid register number but also for an invalid
regulator number, as both would result in returning uninitialized
data. The s5m8767_pmic_probe() function is then changed accordingly
to fail on a read error, as all the other callers of s5m8767_get_register()
already do.
In practice this probably cannot happen, as we don't call
s5m8767_get_register() with invalid arguments, but the gcc
warning seems valid in principle, in terms writing safe
error checking.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 9c4c60554acf ("regulator: s5m8767: Convert to use regulator_[enable|disable|is_enabled]_regmap")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull regulator updates from Mark Brown: "Aside from a fix for a spurious warning (which caused more problems than it fixed in the fixing really) this is all driver updates, including new drivers for Dialog PV88060/90 and TI LM363x and TPS65086 devices. The qcom_smd driver has had PM8916 and PMA8084 support added" * tag 'regulator-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (36 commits) regulator: core: remove some dead code regulator: core: use dev_to_rdev regulator: lp872x: Get rid of duplicate reference to DVS GPIO regulator: lp872x: Add missing of_match in regulators descriptions regulator: axp20x: Fix GPIO LDO enable value for AXP22x regulator: lp8788: constify regulator_ops structures regulator: wm8*: constify regulator_ops structures regulator: da9*: constify regulator_ops structures regulator: mt6311: Use REGCACHE_RBTREE regulator: tps65917/palmas: Add bypass ops for LDOs with bypass capability regulator: qcom-smd: Add support for PMA8084 regulator: qcom-smd: Add PM8916 support soc: qcom: documentation: Update SMD/RPM Docs regulator: pv88090: logical vs bitwise AND typo regulator: pv88090: Fix irq leak regulator: pv88090: new regulator driver regulator: wm831x-ldo: Use platform_register/unregister_drivers() regulator: wm831x-dcdc: Use platform_register/unregister_drivers() regulator: lp8788-ldo: Use platform_register/unregister_drivers() regulator: core: Fix nested locking of supplies ...