max597x is hot swap controller. This regulator driver controls the same & also configures fault protection features supported by the chip. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Link: https://lore.kernel.org/r/20220705122244.472894-4-Naresh.Solanki@9elements.com Signed-off-by: Mark Brown <broonie@kernel.org>
Add mt6370 DisplayBias and VibLDO support. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/20220623115631.22209-10-peterwu.pub@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Add RT5120 PMIC regulator support. It integrates 4 buck convertes, 1 LDO voltage regulator, 1 external enable signal to control the external power source. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1655892104-10874-4-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Regulators block of SM5703 controls several voltage regulators which are used to power various components. There are 3 LDO outputs ranging from 1.5 to 3.3V, a buck regulator ranging from 1V to 3V, two fixed voltage LDO regulators for powering the USB devices and one high-power fixed voltage LDO line (actually two lines) meant to power high-power USB devices. Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Link: https://lore.kernel.org/r/20220423085319.483524-6-markuss.broks@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for Richtek RT5759 high-performance DCDC converter. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1648294788-11758-3-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for Richtek RT5190A PMIC. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1646812903-32496-3-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
TI's TPS62864/TPS6286/TPS62868/TPS62869 are high-frequency synchronous step-down converters controlled via I2C. There are differences in the electrical characteristics and packaging between the variants, but the register interfaces are identical. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20220204155241.576342-3-vincent.whitchurch@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
The MAX20086-MAX20089 are dual/quad power protectors for cameras. Add a driver that supports controlling the outputs individually. Additional features, such as overcurrent detection, may be added later if needed. Signed-off-by: Watson Chow <watson.chow@avnet.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20220106224350.16957-3-laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Mark Brown <broonie@kernel.org>
The TPS68470 PMIC provides Clocks, GPIOs and Regulators. At present in the kernel the Regulators and Clocks are controlled by an OpRegion driver designed to work with power control methods defined in ACPI, but some platforms lack those methods, meaning drivers need to be able to consume the resources of these chips through the usual frameworks. This commit adds a driver for the regulators provided by the tps68470, and is designed to bind to the platform_device registered by the intel_skl_int3472 module. This is based on this out of tree driver written by Intel: https://github.com/intel/linux-intel-lts/blob/4.14/base/drivers/regulator/tps68470-regulator.c with various cleanups added. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211203102857.44539-6-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
Driver was upstreamed in 2013 and never got a user, remove it. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20211021192258.21968-3-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>