linux-stable.git/drivers/rapidio, branch linux-3.14.y

rapidio/tsi721_dma: fix failure to obtain transaction descriptor

2014-08-07T21:52:37+00:00

commit 0193ed8225e1a79ed64632106ec3cc81798cb13c upstream.

This is a bug fix for the situation when function tsi721_desc_get() fails
to obtain a free transaction descriptor.

The bug usually results in a memory access crash dump when data transfer
scatter-gather list has more entries than size of hardware buffer
descriptors ring.  This fix ensures that error is properly returned to a
caller instead of an invalid entry.

This patch is applicable to kernel versions starting from v3.5.

Signed-off-by: Alexandre Bounine 
Cc: Matt Porter 
Cc: Andre van Herk 
Cc: Stef van Os 
Cc: Vinod Koul 
Cc: Dan Williams 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

rapidio/tsi721: fix tasklet termination in dma channel release

2014-03-04T15:55:49+00:00

This patch is a modification of the patch originally proposed by
Xiaotian Feng : https://lkml.org/lkml/2012/11/5/413
This new version disables DMA channel interrupts and ensures that the
tasklet wil not be scheduled again before calling tasklet_kill().

Unfortunately the updated patch was not released at that time due to
planned rework of Tsi721 mport driver to use threaded interrupts (which
has yet to happen).  Recently the issue was reported again:
https://lkml.org/lkml/2014/2/19/762.

Description from the original Xiaotian's patch:

 "Some drivers use tasklet_disable in device remove/release process,
  tasklet_disable will inc tasklet->count and return.  If the tasklet is
  not handled yet under some softirq pressure, the tasklet will be
  placed on the tasklet_vec, never have a chance to be excuted.  This
  might lead to a heavy loaded ksoftirqd, wakeup with pending_softirq,
  but tasklet is disabled.  tasklet_kill should be used in this case."

This patch is applicable to kernel versions starting from v3.5.

Signed-off-by: Alexandre Bounine 
Cc: Matt Porter 
Cc: Xiaotian Feng 
Reviewed-by: Thomas Gleixner 
Cc: Mike Galbraith 
Cc: 	[3.5+]
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rapidio: convert bus code to use dev_groups

2013-10-17T01:36:03+00:00

The dev_attrs field of struct bus_type is going away soon, dev_groups
should be used instead.  This converts the rapidio bus code to use the
correct field.

Cc: Matt Porter 
Cc: Alexandre Bounine 
Signed-off-by: Greg Kroah-Hartman

rapidio: convert bus code to use bus_groups

2013-09-26T22:49:42+00:00

The bus_attrs field of struct bus_type is going away soon, dev_groups
should be used instead.  This converts the rapidio bus code to use the
correct field.

Cc: Matt Porter 
Cc: Alexandre Bounine 
Signed-off-by: Greg Kroah-Hartman

rapidio: fix use after free in rio_unregister_scan()

2013-07-31T21:41:02+00:00

We're freeing the list iterator so we can't move to the next entry.
Since there is only one matching mport_id, we can just break after
finding it.

Signed-off-by: Dan Carpenter 
Reviewed-by: Ryan Mallon 
Acked-by: Alexandre Bounine 
Cc: Matt Porter 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2013-07-13T21:52:21+00:00

Pull MIPS updates from Ralf Baechle:
 "MIPS updates:

   - All the things that didn't make 3.10.
   - Removes the Windriver PPMC platform.  Nobody will miss it.
   - Remove a workaround from kernel/irq/irqdomain.c which was there
     exclusivly for MIPS.  Patch by Grant Likely.
   - More small improvments for the SEAD 3 platform
   - Improvments on the BMIPS / SMP support for the BCM63xx series.
   - Various cleanups of dead leftovers.
   - Platform support for the Cavium Octeon-based EdgeRouter Lite.

  Two large KVM patchsets didn't make it for this pull request because
  their respective authors are vacationing"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits)
  MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER
  MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions
  MIPS: SEAD3: Disable L2 cache on SEAD-3.
  MIPS: BCM63xx: Enable second core SMP on BCM6328 if available
  MIPS: BCM63xx: Add SMP support to prom.c
  MIPS: define write{b,w,l,q}_relaxed
  MIPS: Expose missing pci_io{map,unmap} declarations
  MIPS: Malta: Update GCMP detection.
  Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET"
  MIPS: APSP: Remove 
  SSB: Kconfig: Amend SSB_EMBEDDED dependencies
  MIPS: microMIPS: Fix improper definition of ISA exception bit.
  MIPS: Don't try to decode microMIPS branch instructions where they cannot exist.
  MIPS: Declare emulate_load_store_microMIPS as a static function.
  MIPS: Fix typos and cleanup comment
  MIPS: Cleanup indentation and whitespace
  MIPS: BMIPS: support booting from physical CPU other than 0
  MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS
  MIPS: GIC: Fix gic_set_affinity infinite loop
  MIPS: Don't save/restore OCTEON wide multiplier state on syscalls.
  ...

rapidio: change endpoint device name format

2013-07-03T23:08:05+00:00

Change endpoint device name format to use a component tag value instead of
device destination ID.

RapidIO specification defines a component tag to be a unique identifier
for devices in a network.  RapidIO switches already use component tag as
part of their device name and also use it for device identification when
processing error management event notifications.

Forming an endpoint's device name using its component tag instead of
destination ID allows to keep sysfs device directories unchanged in case
if a routing process dynamically changes endpoint's destination ID as a
result of route optimization.

This change should not affect any existing users because a valid device
destination ID always should be obtained by reading "destid" attribute and
not by parsing device name.

This patch also removes switchid member from struct rio_switch because it
simply duplicates the component tag and does not have other use than in
device name generation.

Signed-off-by: Alexandre Bounine 
Cc: Matt Porter 
Cc: Li Yang 
Cc: Kumar Gala 
Cc: Andre van Herk 
Cc: Micha Nelissen 
Cc: Stef van Os 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rapidio: add udev notification

2013-07-03T23:08:05+00:00

Add RapidIO-specific modalias generation to enable udev notifications
about RapidIO-specific events.

The RapidIO modalias string format is shown below:

"rapidio:vNNNNdNNNNavNNNNadNNNN"

Where:
v  - Device Vendor ID (16 bit),
d  - Device ID (16 bit),
av - Assembly Vendor ID (16 bit),
ad - Assembly ID (16 bit),

as they are reported in corresponding Capability Registers (CARs)
of each RapidIO device.

Signed-off-by: Alexandre Bounine 
Cc: Matt Porter 
Cc: Li Yang 
Cc: Kumar Gala 
Cc: Andre van Herk 
Cc: Micha Nelissen 
Cc: Stef van Os 
Cc: Jean Delvare 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rapidio: add modular build option for the subsystem core

2013-07-03T23:08:05+00:00

Add a configuration option to build RapidIO subsystem core code as a
loadable kernel module.  Currently this option is available only for
x86-based platforms, with the additional patch for PowerPC planned to be
provided later.

This patch replaces kernel command line parameter "riohdid=" with its
module-specific analog "rapidio.hdid=".

Signed-off-by: Alexandre Bounine 
Cc: Matt Porter 
Cc: Li Yang 
Cc: Kumar Gala 
Cc: Andre van Herk 
Cc: Micha Nelissen 
Cc: Stef van Os 
Cc: Jean Delvare 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rapidio/tsi721: convert to modular mport driver

2013-07-03T23:08:04+00:00

This patch adds an option to build device driver for Tsi721 PCIe-to-SRIO
bridge device as a kernel module.

Currently this module cannot be unloaded because the existing RapidIO
subsystem code does not support dynamic removal of local RapidIO
controllers (TODO).

Signed-off-by: Alexandre Bounine 
Cc: Matt Porter 
Cc: Li Yang 
Cc: Kumar Gala 
Cc: Andre van Herk 
Cc: Micha Nelissen 
Cc: Stef van Os 
Cc: Jean Delvare 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds