Currently .get_state() and .apply() use dev_get_drvdata() on the struct
device related to the pwm chip.  This only works after .probe() called
platform_set_drvdata() which in this driver happens only after
pwmchip_add() and so comes possibly too late.

Instead of setting the driver data earlier use the traditional
container_of approach as this way the driver data is conceptually and
computational nearer.

Fixes: 9db33d221efc ("pwm: Add support for sl28cpld PWM controller")
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM SoC platform updates from Olof Johansson:
 "SoC changes, a substantial part of this is cleanup of some of the
  older platforms that used to have a bunch of board files.

  In particular:

   - Remove non-DT i.MX platforms that haven't seen activity in years,
     it's time to remove them.

   - A bunch of cleanup and removal of platform data for TI/OMAP
     platforms, moving over to genpd for power/reset control (yay!)

   - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
     closer to multiplatform support (not quite there yet, but getting
     close).

  There are a few other changes too, smaller fixlets, etc. For new
  platform support, the primary ones are:

   - New SoC: Hisilicon SD5203, ARM926EJ-S platform.

   - Cpufreq support for i.MX7ULP"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
  ARM: mstar: Select MStar intc
  ARM: stm32: Replace HTTP links with HTTPS ones
  ARM: debug: add UART early console support for SD5203
  ARM: hisi: add support for SD5203 SoC
  ARM: omap3: enable off mode automatically
  clk: imx: imx35: Remove mx35_clocks_init()
  clk: imx: imx31: Remove mx31_clocks_init()
  clk: imx: imx27: Remove mx27_clocks_init()
  ARM: imx: Remove unused definitions
  ARM: imx35: Retrieve the IIM base address from devicetree
  ARM: imx3: Retrieve the AVIC base address from devicetree
  ARM: imx3: Retrieve the CCM base address from devicetree
  ARM: imx31: Retrieve the IIM base address from devicetree
  ARM: imx27: Retrieve the CCM base address from devicetree
  ARM: imx27: Retrieve the SYSCTRL base address from devicetree
  ARM: s3c64xx: bring back notes from removed debug-macro.S
  ARM: s3c24xx: fix Wunused-variable warning on !MMU
  ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
  MAINTAINERS: mark linux-samsung-soc list non-moderated
  ARM: imx: Remove remnant board file support pieces
  ...

Pull chrome platform updates from Benson Leung:
 "cros-ec:
   - Error code cleanup across cros-ec by Guenter
   - Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status

  cros_ec_typec:
   - Landed initial USB4 support in typec connector class driver for
     cros_ec
   - Role switch bugfix on disconnect, and reordering configuration
     steps

  cros_ec_lightbar:
   - Fix buffer outsize and result for get_lightbar_version

  misc:
   - Remove config MFD_CROS_EC, now that transition from MFD is complete
   - Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard
     keymap"

* tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA
  platform/chrome: Use kobj_to_dev() instead of container_of()
  platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer()
  platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites
  platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config
  platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command
  platform/chrome: cros_ec_trace: Add fields to command traces
  platform/chrome: cros_ec_typec: Re-order connector configuration steps
  platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect
  platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role()
  platform/chrome: cros_ec_typec: USB4 support
  pwm: cros-ec: Simplify EC error handling
  platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes
  platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT
  pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status
  platform/chrome: cros_ec_sysfs: Report range of error codes from EC
  cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status
  iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code

Pull pwm updates from Thierry Reding:
 "This release cycle's updates are mostly cleanup and some minor fixes"

* tag 'pwm/for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  dt-bindings: pwm: renesas,pwm-rcar: Add r8a7742 support
  dt-bindings: pwm: renesas,tpu-pwm: Document r8a7742 support
  pwm: Allow store 64-bit duty cycle from sysfs interface
  pwm: img: Fix null pointer access in probe
  pwm: pca9685: Disable unused alternative addresses
  pwm: pca9685: Use BIT() macro instead of shift
  pwm: pca9685: Make comments more consistent
  pwm: sun4i: Simplify with dev_err_probe()
  pwm: sprd: Simplify with dev_err_probe()
  pwm: sifive: Simplify with dev_err_probe()
  pwm: rockchip: Simplify with dev_err_probe()
  pwm: jz4740: Simplify with dev_err_probe()
  pwm: bcm2835: Simplify with dev_err_probe()
  pwm: Convert to use DEFINE_SEQ_ATTRIBUTE macro
  pwm: rockchip: Keep enabled PWMs running while probing
  dt-bindings: pwm: renesas,pwm-rcar: Add r8a774e1 support

Pull drm updates from Dave Airlie:
 "Not a major amount of change, the i915 trees got split into display
  and gt trees to better facilitate higher level review, and there's a
  major refactoring of i915 GEM locking to use more core kernel concepts
  (like ww-mutexes). msm gets per-process pagetables, older AMD SI cards
  get DC support, nouveau got a bump in displayport support with common
  code extraction from i915.

  Outside of drm this contains a couple of patches for hexint
  moduleparams which you've acked, and a virtio common code tree that
  you should also get via it's regular path.

  New driver:
   - Cadence MHDP8546 DisplayPort bridge driver

  core:
   - cross-driver scatterlist cleanups
   - devm_drm conversions
   - remove drm_dev_init
   - devm_drm_dev_alloc conversion

  ttm:
   - lots of refactoring and cleanups

  bridges:
   - chained bridge support in more drivers

  panel:
   - misc new panels

  scheduler:
   - cleanup priority levels

  displayport:
   - refactor i915 code into helpers for nouveau

  i915:
   - split into display and GT trees
   - WW locking refactoring in GEM
   - execbuf2 extension mechanism
   - syncobj timeline support
   - GEN 12 HOBL display powersaving
   - Rocket Lake display additions
   - Disable FBC on Tigerlake
   - Tigerlake Type-C + DP improvements
   - Hotplug interrupt refactoring

  amdgpu:
   - Sienna Cichlid updates
   - Navy Flounder updates
   - DCE6 (SI) support for DC
   - Plane rotation enabled
   - TMZ state info ioctl
   - PCIe DPC recovery support
   - DC interrupt handling refactor
   - OLED panel fixes

  amdkfd:
   - add SMI events for thermal throttling
   - SMI interface events ioctl update
   - process eviction counters

  radeon:
   - move to dma_ for allocations
   - expose sclk via sysfs

  msm:
   - DSI support for sm8150/sm8250
   - per-process GPU pagetable support
   - Displayport support

  mediatek:
   - move HDMI phy driver to PHY
   - convert mtk-dpi to bridge API
   - disable mt2701 tmds

  tegra:
   - bridge support

  exynos:
   - misc cleanups

  vc4:
   - dual display cleanups

  ast:
   - cleanups

  gma500:
   - conversion to GPIOd API

  hisilicon:
   - misc reworks

  ingenic:
   - clock handling and format improvements

  mcde:
   - DSI support

  mgag200:
   - desktop g200 support

  mxsfb:
   - i.MX7 + i.MX8M
   - alpha plane support

  panfrost:
   - devfreq support
   - amlogic SoC support

  ps8640:
   - EDID from eDP retrieval

  tidss:
   - AM65xx YUV workaround

  virtio:
   - virtio-gpu exported resources

  rcar-du:
   - R8A7742, R8A774E1 and R8A77961 support
   - YUV planar format fixes
   - non-visible plane handling
   - VSP device reference count fix
   - Kconfig fix to avoid displaying disabled options in .config"

* tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits)
  drm/ingenic: Fix bad revert
  drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init
  drm/amdgpu: Remove warning for virtual_display
  drm/amdgpu: kfd_initialized can be static
  drm/amd/pm: setup APU dpm clock table in SMU HW initialization
  drm/amdgpu: prevent spurious warning
  drm/amdgpu/swsmu: fix ARC build errors
  drm/amd/display: Fix OPTC_DATA_FORMAT programming
  drm/amd/display: Don't allow pstate if no support in blank
  drm/panfrost: increase readl_relaxed_poll_timeout values
  MAINTAINERS: Update entry for st7703 driver after the rename
  Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached"
  drm/amd/display: HDMI remote sink need mode validation for Linux
  drm/amd/display: Change to correct unit on audio rate
  drm/amd/display: Avoid set zero in the requested clk
  drm/amdgpu: align frag_end to covered address space
  drm/amdgpu: fix NULL pointer dereference for Renoir
  drm/vmwgfx: fix regression in thp code due to ttm init refactor.
  drm/amdgpu/swsmu: add interrupt work handler for smu11 parts
  drm/amdgpu/swsmu: add interrupt work function
  ...

PWM core was converted to u64 by the commit a9d887dc1c60 ("pwm: Convert
period and duty cycle to u64") but did not change the duty_cycle_store()
so it will error out if trying to pass a numeric string bigger than
2^32-1.

Fix this by using u64 and kstrtou64() in duty_cycle_store().

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Guru Das Srinagesh <gurus@codeaurora.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

dev_get_drvdata() is called in img_pwm_runtime_resume() before the
driver data is set.
When pm_runtime_enabled() returns false in img_pwm_probe() it calls
img_pwm_runtime_resume() which results in a null pointer access.

This patch fixes the problem by setting the driver data earlier in the
img_pwm_probe() function.

This crash was seen when booting the Imagination Technologies Creator
Ci40 (Marduk) with kernel 5.4 in OpenWrt.

Fixes: e690ae526216 ("pwm: img: Add runtime PM")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

The PCA9685 supports listening to 1 or more alternative I2C chip addresses
for some special features that this driver does not support.
By default the LED ALLCALL address is active (default 0x70), which causes
this chip to respond to address 0x70 in addition to its main address
(0x41). This is not desireable if there is another device on the same bus
that uses this address (like a TMP103 for example).
Since this feature is not supported by this driver, it is best to disable
these addresses in the chip to avoid unsuspected bus collisions.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Make all explanatory comments start with an uppercase char.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>