This removes two cases of explicit NUL padding that now causes warnings
because of '-Wunterminated-string-initialization' being part of -Wextra
in gcc-15.

Gcc is being silly in this case when it says that it truncates a NUL
terminator, because in these cases there were _multiple_ NUL characters.

But we can get rid of the warning by just simplifying the two
initializers that trigger the warning for me, so this does exactly that.

I'm not sure why the power supply code did that odd

    .attr_name = #_name "\0",

pattern: it was introduced in commit 2cabeaf15129 ("power: supply: core:
Cleanup power supply sysfs attribute list"), but that 'attr_name[]'
field is an explicitly sized character array in a statically initialized
variable, and a string initializer always has a terminating NUL _and_
statically initialized character arrays are zero-padded anyway, so it
really seems to be rather extraneous belt-and-suspenders.

The zero_uuid[16] initialization in drivers/md/bcache/super.c makes
perfect sense, but it isn't necessary for the same reasons, and not
worth the new gcc warning noise.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull i2c updates from Wolfram Sang:
 "i2c-core updates (collected by Wolfram):
   - remove last user and unexport i2c_of_match_device()
   - irq usage cleanup from Jiri

  i2c-host updates (collected by Andi):

  Refactoring and cleanups:
   - octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
     refactorings
   - octeon: remove 10-bit address support

  Improvements:
   - amd-asf: improved error handling
   - designware: use guard(mutex)
   - amd-asf, designware: update naming to follow latest specs
   - cadence: fix cleanup path in probe
   - i801: use MMIO and I/O mapping helpers to access registers
   - pxa: handle error after clk_prepare_enable

  New features:
   - added i2c_10bit_addr_*_from_msg() and updated multiple drivers
   - omap: added multiplexer state handling
   - qcom-geni: update frequency configuration
   - qup: introduce DMA usage policy

  New hardware support:
   - exynos: add support for Samsung exynos7870
   - k1: add support for spacemit k1 (new driver)
   - imx: add support for i.mx94 lpi2c
   - rk3x: add support for rk3562
   - designware: add support for Renesas RZ/N1D

  Multiplexers:
   - ltc4306, reg: fix assignment in platform_driver structure

  at24 eeprom updates (collected by Bartosz):
   - add two new compatible entries to the DT binding document
   - drop of_match_ptr() and ACPI_PTR() macros"

* tag 'i2c-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits)
  dt-bindings: i2c: snps,designware-i2c: describe Renesas RZ/N1D variant
  irqdomain: i2c: Switch to irq_find_mapping()
  i2c: iproc: Refactor prototype and remove redundant error checks
  i2c: qcom-geni: Update i2c frequency table to match hardware guidance
  i2c: mlxbf: Use readl_poll_timeout_atomic() for polling
  i2c: pasemi: Add registers bits and switch to BIT()
  i2c: k1: Initialize variable before use
  i2c: spacemit: add support for SpacemiT K1 SoC
  dt-bindings: i2c: spacemit: add support for K1 SoC
  i2c: omap: Add support for setting mux
  dt-bindings: i2c: omap: Add mux-states property
  i2c: octeon: remove 10-bit addressing support
  i2c: octeon: fix return commenting
  i2c: i801: Use MMIO if available
  i2c: i801: Switch to iomapped register access
  i2c: i801: Improve too small kill wait time in i801_check_post
  i2c: i801: Move i801_wait_intr and i801_wait_byte_done in the code
  i2c: i801: Cosmetic improvements
  i2c: cadence: Move reset_control_assert after pm_runtime_set_suspended in probe error path
  i2c: cadence: Simplify using devm_clk_get_enabled()
  ...

Pull non-MM updates from Andrew Morton:

 - The series "powerpc/crash: use generic crashkernel reservation" from
   Sourabh Jain changes powerpc's kexec code to use more of the generic
   layers.

 - The series "get_maintainer: report subsystem status separately" from
   Vlastimil Babka makes some long-requested improvements to the
   get_maintainer output.

 - The series "ucount: Simplify refcounting with rcuref_t" from
   Sebastian Siewior cleans up and optimizing the refcounting in the
   ucount code.

 - The series "reboot: support runtime configuration of emergency
   hw_protection action" from Ahmad Fatoum improves the ability for a
   driver to perform an emergency system shutdown or reboot.

 - The series "Converge on using secs_to_jiffies() part two" from Easwar
   Hariharan performs further migrations from msecs_to_jiffies() to
   secs_to_jiffies().

 - The series "lib/interval_tree: add some test cases and cleanup" from
   Wei Yang permits more userspace testing of kernel library code, adds
   some more tests and performs some cleanups.

 - The series "hung_task: Dump the blocking task stacktrace" from Masami
   Hiramatsu arranges for the hung_task detector to dump the stack of
   the blocking task and not just that of the blocked task.

 - The series "resource: Split and use DEFINE_RES*() macros" from Andy
   Shevchenko provides some cleanups to the resource definition macros.

 - Plus the usual shower of singleton patches - please see the
   individual changelogs for details.

* tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
  mailmap: consolidate email addresses of Alexander Sverdlin
  fs/procfs: fix the comment above proc_pid_wchan()
  relay: use kasprintf() instead of fixed buffer formatting
  resource: replace open coded variant of DEFINE_RES()
  resource: replace open coded variants of DEFINE_RES_*_NAMED()
  resource: replace open coded variant of DEFINE_RES_NAMED_DESC()
  resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED()
  samples: add hung_task detector mutex blocking sample
  hung_task: show the blocker task if the task is hung on mutex
  kexec_core: accept unaccepted kexec segments' destination addresses
  watchdog/perf: optimize bytes copied and remove manual NUL-termination
  lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap()
  lib/interval_tree: skip the check before go to the right subtree
  lib/interval_tree: add test case for span iteration
  lib/interval_tree: add test case for interval_tree_iter_xxx() helpers
  lib/rbtree: add random seed
  lib/rbtree: split tests
  lib/rbtree: enable userland test suite for rbtree related data structure
  checkpatch: describe --min-conf-desc-length
  scripts/gdb/symbols: determine KASLR offset on s390
  ...

Pull power supply and reset updates from Sebastian Reichel:
 "Power-supply core:
   - remove unused set_charged infrastructure
   - drop of_node from power_supply struct

  Power-supply drivers:
   - axp717: support devices without thermistors
   - bq27xxx: support max design voltage for bq270x0 and bq27x10
   - pcf50633: drop charger driver
   - max1720x: add battery health support
   - switch all power-supply devices from of_node to fwnode
   - convert regmap users to maple tree register cache
   - convert drivers to devm_kmemdup_array
   - misc cleanups and fixes

  Reset drivers:
   - at91-sama5d2_shdwc: add sama7d65 support

* tag 'for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits)
  power: supply: mt6370: Remove redundant 'flush_workqueue()' calls
  Revert "power: supply: bq27xxx: do not report bogus zero values"
  power: supply: max77693: Fix wrong conversion of charge input threshold value
  power: supply: pcf50633: Remove charger
  power: supply: all: switch psy_cfg from of_node to fwnode
  power: supply: core: get rid of of_node
  power: reset: at91-sama5d2_shdwc: Add sama7d65 PMC
  power: supply: smb347: convert to use maple tree register cache
  power: supply: rt9455: convert to use maple tree register cache
  power: supply: max1720x: convert to use maple tree register cache
  power: supply: ltc4162l: convert to use maple tree register cache
  power: supply: bq25980: convert to use maple tree register cache
  power: supply: bq25890: convert to use maple tree register cache
  power: supply: bq2515x: convert to use maple tree register cache
  power: supply: bq24257: convert to use maple tree register cache
  power: supply: bd99954: convert to use maple tree register cache
  power: supply: Remove unused set_charged method
  power: supply: ds2760: Remove unused ds2760_battery_set_charged
  power: supply: core: Remove unused power_supply_set_battery_charged
  power: supply: sc27xx: use devm_kmemdup_array()
  ...

Pull MFD updates from Lee Jones:
 "Maxim MAX77705:
   - Added core MFD driver.
   - Added charger driver.
   - Added devicetree bindings for the charger and MFD core.
   - Added Haptic controller support via the input subsystem.
   - Added LED support.
   - Added support to simple-mfd-i2c for fuel gauge and hwmon.

  Samsung S2MPU05 (Exynos7870 PMIC):
   - Added core MFD support.
   - Added Regulator support for 21 LDOs and 5 BUCKs.
   - Added devicetree bindings for regulators and the PMIC core.

  TI TPS65215 & TPS65214:
   - Added support to the existing TPS65219 driver.
   - Added devicetree bindings.

  STMicroelectronics STM32MP25:
   - Added support to the stm32-timers MFD driver.
   - Added devicetree bindings.

  Congatec Board Controller (CGBC):
   - Added HWMON support for internal sensors.
   - Added support for the conga-SA8 module.

  Microchip LAN969X:
   - Enabled the at91-usart MFD driver for this architecture.

  MediaTek MT6359:
   - Added mfd_cell for mt6359-accdet to allow its driver to probe.

  Other misc driver updates:
   - AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable regs
     for temperature sensor configuration.
   - SM501: Switched to using BIT() macro to mitigate potential integer
     overflows in GPIO functions.
   - ENE KB3930: Added a NULL pointer check for off_gpios during probe
     to prevent potential dereference.
   - SYSCON: Added a check for invalid resource size to prevent issues
     from DT misconfiguration.
   - CGBC: Corrected signedness issues in cgbc_session_request
   - intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
     explicit assignment to REGCACHE_NONE.
   - ipaq-micro / tps65010: Switched to using str_enable_disable()
     helpers for clarity and potential size reduction.
   - upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
   - max8997: Removed unused max8997_irq_exit() function, using devm_*
     helpers instead.
   - lp3943: Dropped unused #include <linux/pwm.h> from the header file.
   - db8500-prcmu: Removed needless return statements in void APIs.
   - qnap-mcu: Replaced commas with semicolons between expressions for
     correctness.
   - STA2X11: Removed the core MFD driver as the underlying platform
     support was removed.
   - EZX-PCAP: Removed the unused pcap_adc_sync function.
   - PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
     gpio, irq) as the underlying s3c24xx platform support was removed.

  Devicetree updates:
   - Converted fsl,mcu-mpc8349emitx binding to YAML
   - Added qcom,msm8937-tcsr compatible
   - Added microchip,sama7d65-flexcom compatible
   - Added rockchip,rk3528-qos syscon compatible
   - Added airoha,en7581-pbus-csr syscon compatible
   - Added microchip,sama7d65-ddr3phy syscon compatible
   - Added microchip,sama7d65-sfrbu syscon compatible"

* tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
  mfd: cgbc-core: Add support for conga-SA8
  dt-bindings: mfd: syscon: Add microchip,sama7d65-sfrbu
  dt-bindings: mfd: syscon: Add microchip,sama7d65-ddr3phy
  mfd: cgbc: Add support for HWMON
  dt-bindings: mfd: syscon: Add the pbus-csr node for Airoha EN7581 SoC
  mfd: cgbc-core: Cleanup signedness in cgbc_session_request()
  mfd: pcf50633: Remove remaining PCF50633 support
  mfd: pcf50633: Remove unused platform IRQ code
  mfd: pcF50633-gpio: Remove unused driver
  mfd: pcf50633-adc: Remove unused driver
  mfd: qnap-mcu: Convert commas to semicolons in qnap_mcu_exec()
  mfd: mt6397-core: Add mfd_cell for mt6359-accdet
  dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
  dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,sama7d65-flexcom
  mfd: ezx-pcap: Remove unused pcap_adc_sync
  mfd: db8500-prcmu: Remove needless return in three void APIs
  mfd: Remove STA2x11 core driver
  mfd: max77620: Allow building as a module
  mfd: ene-kb3930: Fix a potential NULL pointer dereference
  dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8937
  ...

Pull timer cleanups from Thomas Gleixner:
 "A treewide hrtimer timer cleanup

  hrtimers are initialized with hrtimer_init() and a subsequent store to
  the callback pointer. This turned out to be suboptimal for the
  upcoming Rust integration and is obviously a silly implementation to
  begin with.

  This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
  with hrtimer_setup(T, cb);

  The conversion was done with Coccinelle and a few manual fixups.

  Once the conversion has completely landed in mainline, hrtimer_init()
  will be removed and the hrtimer::function becomes a private member"

* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
  wifi: rt2x00: Switch to use hrtimer_update_function()
  io_uring: Use helper function hrtimer_update_function()
  serial: xilinx_uartps: Use helper function hrtimer_update_function()
  ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
  RDMA: Switch to use hrtimer_setup()
  virtio: mem: Switch to use hrtimer_setup()
  drm/vmwgfx: Switch to use hrtimer_setup()
  drm/xe/oa: Switch to use hrtimer_setup()
  drm/vkms: Switch to use hrtimer_setup()
  drm/msm: Switch to use hrtimer_setup()
  drm/i915/request: Switch to use hrtimer_setup()
  drm/i915/uncore: Switch to use hrtimer_setup()
  drm/i915/pmu: Switch to use hrtimer_setup()
  drm/i915/perf: Switch to use hrtimer_setup()
  drm/i915/gvt: Switch to use hrtimer_setup()
  drm/i915/huc: Switch to use hrtimer_setup()
  drm/amdgpu: Switch to use hrtimer_setup()
  stm class: heartbeat: Switch to use hrtimer_setup()
  i2c: Switch to use hrtimer_setup()
  iio: Switch to use hrtimer_setup()
  ...

i2c-host updates for v6.15

Refactoring and cleanups
 - octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
   refactorings
 - octeon: remove 10-bit address support

Improvements
 - amd-asf: improved error handling
 - designware: use guard(mutex)
 - amd-asf, designware: update naming to follow latest specs
 - cadence: fix cleanup path in probe
 - i801: use MMIO and I/O mapping helpers to access registers
 - pxa: handle error after clk_prepare_enable

New features
 - added i2c_10bit_addr_*_from_msg() and updated multiple drivers
 - omap: added multiplexer state handling
 - qcom-geni: update frequency configuration
 - qup: introduce DMA usage policy

New hardware support
 - exynos: add support for Samsung exynos7870
 - k1: add support for spacemit k1 (new driver)
 - imx: add support for i.mx94 lpi2c
 - rk3x: add support for rk3562

Multiplexers
 - ltc4306, reg: fix assignment in platform_driver structure

Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies().  As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the
multiplication

This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:

@depends on patch@
expression E;
@@

-msecs_to_jiffies
+secs_to_jiffies
(E
- * \( 1000 \| MSEC_PER_SEC \)
)

Link: https://lkml.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-10-a43967e36c88@linux.microsoft.com
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Maol <dlemoal@kernel.org>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Dongsheng Yang <dongsheng.yang@easystack.cn>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Frank Li <frank.li@nxp.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: James Bottomley <james.bottomley@HansenPartnership.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Niklas Cassel <cassel@kernel.org>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Shyam-sundar S-k <Shyam-sundar.S-k@amd.com>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.

Remove the redundant 'flush_workqueue()' calls.

This was generated with coccinelle:

@@
expression E;
@@
- flush_workqueue(E);
  destroy_workqueue(E);

Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250312073729.1430053-1-nichen@iscas.ac.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Commit f3974aca381e ("power: supply: bq27xxx: do not report bogus zero
values") breaks property reporting on chips which are reporting normal
values. During testing, excessive emphasis was evidently placed on the
chip with non-working conditions, and not enough testing was done on a
battery that had normal state.

A correct fix will be submitted in a separate patch.

Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Closes: https://lore.kernel.org/linux-pm/CB5B8FE7-D619-4D30-BD2D-58B6CEF83D46@goldelico.com/
Fixes: f3974aca381e ("power: supply: bq27xxx: do not report bogus zero values")
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Link: https://lore.kernel.org/r/20250312121712.146109-2-absicsz@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>