commit 86b9182df8bb12610d4d6feac45a69f3ed57bfd2 upstream.

The ADC in the JZ4740 can work either in high-precision mode with a 2.5V
range, or in low-precision mode with a 7.5V range. The code in place in
this driver will select the proper scale according to the maximum
voltage of the battery.

The JZ4770 however only has one mode, with a 6.6V range. If only one
scale is available, there's no need to change it (and nothing to change
it to), and trying to do so will fail with -EINVAL.

Fixes: fb24ccfbe1e0 ("power: supply: add Ingenic JZ47xx battery driver.")

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Artur Rojek <contact@artur-rojek.eu>
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull additional power management updates from Rafael Wysocki:
 "These fix an ACPI EC driver bug exposed by the recent rework of the
  suspend-to-idle code flow, reintroduce frequency constraints into
  device PM QoS (in preparation for adding QoS support to devfreq), drop
  a redundant field from struct cpuidle_state and clean up Kconfig in
  some places.

  Specifics:

   - Avoid a race condition in the ACPI EC driver that may cause systems
     to be unable to leave suspend-to-idle (Rafael Wysocki)

   - Drop the "disabled" field, which is redundant, from struct
     cpuidle_state (Rafael Wysocki)

   - Reintroduce device PM QoS frequency constraints (temporarily
     introduced and than dropped during the 5.4 cycle) in preparation
     for adding QoS support to devfreq (Leonard Crestez)

   - Clean up indentation (in multiple places) and the cpuidle drivers
     help text in Kconfig (Krzysztof Kozlowski, Randy Dunlap)"

* tag 'pm-5.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: PM: s2idle: Rework ACPI events synchronization
  ACPI: EC: Rework flushing of pending work
  PM / devfreq: Add missing locking while setting suspend_freq
  PM / QoS: Restore DEV_PM_QOS_MIN/MAX_FREQUENCY
  PM / QoS: Reorder pm_qos/freq_qos/dev_pm_qos structs
  PM / QoS: Initial kunit test
  PM / QoS: Redefine FREQ_QOS_MAX_DEFAULT_VALUE to S32_MAX
  power: avs: Fix Kconfig indentation
  cpufreq: Fix Kconfig indentation
  cpuidle: minor Kconfig help text fixes
  cpuidle: Drop disabled field from struct cpuidle_state
  cpuidle: Fix Kconfig indentation

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Add support for a "resource managed strongly uncachable ioremap"
     call
   - Provide a collection of MFD helper macros
   - Remove mfd_clone_cell() from MFD core
   - Add NULL de-reference protection in MFD core
   - Remove superfluous function fd_platform_add_cell() from MFD core
   - Honour Device Tree's request to disable a device

  New Drivers:
   - Add support for MediaTek MT6323 PMIC

  New Device Support:
   - Add support for Gemini Lake to Intel LPSS PCI
   - Add support for Cherry Trail Crystal Cover PMIC to Intel SoC PMIC
     CRC
   - Add support for PM{I}8950 to Qualcomm SPMI PMIC
   - Add support for U8420 to ST-Ericsson DB8500
   - Add support for Comet Lake PCH-H to Intel LPSS PCI

  New Functionality:
   - Add support for requested supply clocks; madera-core

  Fix-ups:
   - Lower interrupt priority; rk808
   - Use provided helpers (macros, group functions, defines); rk808,
     ipaq-micro, ab8500-core, db8500-prcmu, mt6397-core, cs5535-mfd
   - Only allocate IRQs on request; max77620
   - Use simplified API; arizona-core
   - Remove redundant and/or duplicated code; wm8998-tables, arizona,
     syscon
   - Device Tree binding fix-ups; madera, max77650, max77693
   - Remove mfd_cell->id abuse hack; cs5535-mfd
   - Remove only user of mfd_clone_cell(); cs5535-mfd
   - Make resources static; rohm-bd70528

  Bug Fixes:
   - Fix product ID for RK818; rk808
   - Fix Power Key; rk808
   - Fix booting on the BananaPi; mt6397-core
   - Endian fix-ups; twl.h
   - Fix static error checker warnings; ti_am335x_tscadc"

* tag 'mfd-next-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (47 commits)
  Revert "mfd: syscon: Set name of regmap_config"
  mfd: ti_am335x_tscadc: Fix static checker warning
  mfd: bd70528: Staticize bit value definitions
  mfd: mfd-core: Honour Device Tree's request to disable a child-device
  dt-bindings: mfd: max77693: Fix missing curly brace
  mfd: intel-lpss: Add Intel Comet Lake PCH-H PCI IDs
  mfd: db8500-prcmu: Support U8420-sysclk firmware
  dt-bindings: mfd: max77650: Convert the binding document to yaml
  mfd: mfd-core: Move pdev->mfd_cell creation back into mfd_add_device()
  mfd: mfd-core: Remove usage counting for .{en,dis}able() call-backs
  x86: olpc-xo1-sci: Remove invocation of MFD's .enable()/.disable() call-backs
  x86: olpc-xo1-pm: Remove invocation of MFD's .enable()/.disable() call-backs
  mfd: mfd-core: Remove mfd_clone_cell()
  mfd: mfd-core: Protect against NULL call-back function pointer
  mfd: cs5535-mfd: Register clients using their own dedicated MFD cell entries
  mfd: cs5535-mfd: Request shared IO regions centrally
  mfd: cs5535-mfd: Remove mfd_cell->id hack
  mfd: cs5535-mfd: Use PLATFORM_DEVID_* defines and tidy error message
  mfd: intel_soc_pmic_crc: Add "cht_crystal_cove_pmic" cell to CHT cells
  mfd: madera: Add support for requesting the supply clocks
  ...

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
	$ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull power supply and reset updates from Sebastian Reichel:

 - test_power: add support for current and charge_counter

 - cpcap-charger: improve charge calculation and limit default charge
   voltage

 - ab8500: convert to IIO

 - misc small fixes all over drivers

* tag 'for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (29 commits)
  power: supply: bd70528: Add MODULE_ALIAS to allow module auto loading
  power: supply: ab8500_charger: Fix inconsistent IS_ERR and PTR_ERR
  power: supply: cpcap-charger: cpcap_charger_voltage_to_regval() can be static
  power: supply: cpcap-battery: Add basic coulomb counter calibrate support
  power: supply: cpcap-battery: Read and save integrator register CCI
  power: supply: cpcap-battery: Simplify short term power average calculation
  power: supply: cpcap-battery: Simplify coulomb counter calculation with div_s64
  power: supply: cpcap-battery: Move coulomb counter units per lsb to ddata
  power: supply: cpcap-charger: Allow changing constant charge voltage
  power: supply: cpcap-battery: Fix handling of lowered charger voltage
  power: supply: cpcap-charger: Improve battery detection
  power: supply: cpcap-battery: Check voltage before orderly_poweroff
  power: supply: cpcap-charger: Limit voltage to 4.2V for battery
  power: supply: ab8500: Handle invalid IRQ from platform_get_irq_byname()
  power: supply: ab8500_fg: Do not free non-requested IRQs in probe's error path
  power: supply: ab8500: Cleanup probe in reverse order
  power: reset: at91: fix __le32 cast in reset code
  power: supply: abx500_chargalg: Fix code indentation
  mfd: Switch the AB8500 GPADC to IIO
  iio: adc: New driver for the AB8500 GPADC
  ...

There is no need to cast a typed pointer to a void pointer when calling
a function that accepts the latter.  Remove it, as the cast prevents
further compiler checks.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The bd70528 charger driver is probed by MFD driver. Add MODULE_ALIAS
in order to allow udev to load the module when MFD sub-device cell for
charger is added.

Fixes: f8c7f7ddd8ef0 ("power: supply: Initial support for ROHM BD70528 PMIC charger block")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Fix inconsistent IS_ERR and PTR_ERR in ab8500_charger_probe().

The proper pointer to be passed as argument is di->adc_main_charger_c

This bug was detected with the help of Coccinelle.

Fixes: 97ab78bac5d0 ("power: supply: ab8500_charger: Convert to IIO ADC")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

add poweroff driver for mt6323 and make Makefile and Kconfig-Entries

Suggested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Add 'static' keyword to internal function as reported by sparse
using the following configuration:

make ARCH=x86_64 allmodconfig
make C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'

Fixes: d4ee021c410f ("power: supply: cpcap-charger: Limit voltage to 4.2V for battery")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>