linux-stable.git/drivers/power, branch v5.4.201

power: supply: axp288-charger: Set Vhold to 4.4V

2022-04-15T12:18:33+00:00

[ Upstream commit 5ac121b81b4051e7fc83d5b3456a5e499d5bd147 ]

The AXP288's recommended and factory default Vhold value (minimum
input voltage below which the input current draw will be reduced)
is 4.4V. This lines up with other charger IC's such as the TI
bq2419x/bq2429x series which use 4.36V or 4.44V.

For some reason some BIOS-es initialize Vhold to 4.6V or even 4.7V
which combined with the typical voltage drop over typically low
wire gauge micro-USB cables leads to the input-current getting
capped below 1A (with a 2A capable dedicated charger) based on Vhold.

This leads to slow charging, or even to the device slowly discharging
if the device is in heavy use.

As the Linux AXP288 drivers use the builtin BC1.2 charger detection
and send the input-current-limit according to the detected charger
there really is no reason not to use the recommended 4.4V Vhold.

Set Vhold to 4.4V to fix the slow charging issue on various devices.

There is one exception, the special-case of the HP X2 2-in-1s which
combine this BC1.2 capable PMIC with a Type-C port and a 5V/3A factory
provided charger with a Type-C plug which does not do BC1.2. These
have their input-current-limit hardcoded to 3A (like under Windows)
and use a higher Vhold on purpose to limit the current when used
with other chargers. To avoid touching Vhold on these HP X2 laptops
the code setting Vhold is added to an else branch of the if checking
for these models.

Note this also fixes the sofar unused VBUS_ISPOUT_VHOLD_SET_MASK
define, which was wrong.

Signed-off-by: Hans de Goede 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Sasha Levin

power: supply: axp20x_battery: properly report current when discharging

2022-04-15T12:18:32+00:00

[ Upstream commit d4f408cdcd26921c1268cb8dcbe8ffb6faf837f3 ]

As stated in [1], negative current values are used for discharging
batteries.

AXP PMICs internally have two different ADC channels for shunt current
measurement: one used during charging and one during discharging.
The values reported by these ADCs are unsigned.
While the driver properly selects ADC channel to get the data from,
it doesn't apply negative sign when reporting discharging current.

[1] Documentation/ABI/testing/sysfs-class-power

Signed-off-by: Evgeny Boger 
Acked-by: Chen-Yu Tsai 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Sasha Levin

power: supply: wm8350-power: Add missing free in free_charger_irq

2022-04-15T12:18:15+00:00

[ Upstream commit 6dee930f6f6776d1e5a7edf542c6863b47d9f078 ]

In free_charger_irq(), there is no free for 'WM8350_IRQ_CHG_FAST_RDY'.
Therefore, it should be better to add it in order to avoid the memory leak.

Fixes: 14431aa0c5a4 ("power_supply: Add support for WM8350 PMU")
Signed-off-by: Jiasheng Jiang 
Acked-by: Charles Keepax 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Sasha Levin

power: supply: wm8350-power: Handle error for wm8350_register_irq

2022-04-15T12:18:15+00:00

[ Upstream commit b0b14b5ba11bec56fad344a4a0b2e16449cc8b94 ]

As the potential failure of the wm8350_register_irq(),
it should be better to check it and return error if fails.
Also, use 'free_' in order to avoid same code.

Fixes: 14431aa0c5a4 ("power_supply: Add support for WM8350 PMU")
Signed-off-by: Jiasheng Jiang 
Acked-by: Charles Keepax 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Sasha Levin

power: supply: bq24190_charger: Fix bq24190_vbus_is_enabled() wrong false return

2022-04-15T12:18:14+00:00

[ Upstream commit f7731754fdce33dad19be746f647d6ac47c5d695 ]

The datasheet says that the BQ24190_REG_POC_CHG_CONFIG bits can
have a value of either 10(0x2) or 11(0x3) for OTG (5V boost regulator)
mode.

Sofar bq24190_vbus_is_enabled() was only checking for 10 but some BIOS-es
uses 11 when enabling the regulator at boot.

Make bq24190_vbus_is_enabled() also check for 11 so that it does not
wrongly returns false when the bits are set to 11.

Fixes: 66b6bef2c4e0 ("power: supply: bq24190_charger: Export 5V boost converter as regulator")
Cc: Bastien Nocera 
Signed-off-by: Hans de Goede 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Sasha Levin

power: supply: ab8500: Fix memory leak in ab8500_fg_sysfs_init

2022-04-15T12:18:12+00:00

[ Upstream commit 6a4760463dbc6b603690938c468839985189ce0a ]

kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()：

   If this function returns an error, kobject_put() must be called to
   properly clean up the memory associated with the object.

Fix memory leak by calling kobject_put().

Fixes: 8c0984e5a753 ("power: move power supply drivers to power/supply")
Signed-off-by: Miaoqian Lin 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Sasha Levin

power: reset: gemini-poweroff: Fix IRQ check in gemini_poweroff_probe

2022-04-15T12:18:11+00:00

[ Upstream commit ba18dad0fb880cd29aa97b6b75560ef14d1061ba ]

platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:

    int irq = platform_get_irq(pdev, 0);
    if (irq < 0)
        return irq;

Fix the check of return value to catch errors correctly.

Fixes: f7a388d6cd1c ("power: reset: Add a driver for the Gemini poweroff")
Signed-off-by: Miaoqian Lin 
Reviewed-by: Linus Walleij 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Sasha Levin

power: bq25890: Enable continuous conversion for ADC at charging

2022-01-27T08:19:49+00:00

[ Upstream commit 80211be1b9dec04cc2805d3d81e2091ecac289a1 ]

Instead of one shot run of ADC at beginning of charging, run continuous
conversion to ensure that all charging-related values are monitored
properly (input voltage, input current, themperature etc.).

Signed-off-by: Yauhen Kharuzhy 
Reviewed-by: Hans de Goede 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Sasha Levin

power: reset: ltc2952: Fix use of floating point literals

2022-01-11T14:23:32+00:00

commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156c00cc ("power: reset: add LTC2952 poweroff driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1497
Link: https://github.com/llvm/llvm-project/commit/a8083d42b1c346e21623a1d36d1f0cadd7801d83
Signed-off-by: Nathan Chancellor 
Reviewed-by: Nick Desaulniers 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Greg Kroah-Hartman

power: supply: core: Break capacity loop

2022-01-11T14:23:32+00:00

commit 51c7b6a0398f54b9120795796a4cff4fc9634f7d upstream.

We should not go on looking for more capacity tables after
we realize we have looked at the last one in
power_supply_find_ocv2cap_table().

Fixes: 3afb50d7125b ("power: supply: core: Add some helpers to use the battery OCV capacity table")
Cc: Chunyan Zhang 
Cc: Baolin Wang 
Signed-off-by: Linus Walleij 
Reviewed-by: Baolin Wang 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Greg Kroah-Hartman