linux-stable.git/drivers/power, branch v5.3.7 Linux kernel stable tree power: supply: sbs-battery: only return health when battery present 2019-10-11T16:36:07+00:00 Michael Nosthoff committed@heine.so 2019-08-16T07:58:42+00:00 24969c5523271d56f48994c6b5fe79b4ad58b095 commit fe55e770327363304c4111423e6f7ff3c650136d upstream. when the battery is set to sbs-mode and no gpio detection is enabled "health" is always returning a value even when the battery is not present. All other fields return "not present". This leads to a scenario where the driver is constantly switching between "present" and "not present" state. This generates a lot of constant traffic on the i2c. This commit changes the response of "health" to an error when the battery is not responding leading to a consistent "not present" state. Fixes: 76b16f4cdfb8 ("power: supply: sbs-battery: don't assume MANUFACTURER_DATA formats") Cc: <stable@vger.kernel.org> Signed-off-by: Michael Nosthoff <committed@heine.so> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fe55e770327363304c4111423e6f7ff3c650136d upstream.

when the battery is set to sbs-mode and  no gpio detection is enabled
"health" is always returning a value even when the battery is not present.
All other fields return "not present".
This leads to a scenario where the driver is constantly switching between
"present" and "not present" state. This generates a lot of constant
traffic on the i2c.

This commit changes the response of "health" to an error when the battery
is not responding leading to a consistent "not present" state.

Fixes: 76b16f4cdfb8 ("power: supply: sbs-battery: don't assume MANUFACTURER_DATA formats")
Cc: <stable@vger.kernel.org>
Signed-off-by: Michael Nosthoff <committed@heine.so>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
power: supply: sbs-battery: use correct flags field 2019-10-11T16:36:06+00:00 Michael Nosthoff committed@heine.so 2019-08-16T07:37:42+00:00 24a6b4924f51bbe88b1538fe0c41b2dce733d9a3 commit 99956a9e08251a1234434b492875b1eaff502a12 upstream. the type flag is stored in the chip->flags field not in the client->flags field. This currently leads to never using the ti specific health function as client->flags doesn't use that bit. So it's always falling back to the general one. Fixes: 76b16f4cdfb8 ("power: supply: sbs-battery: don't assume MANUFACTURER_DATA formats") Cc: <stable@vger.kernel.org> Signed-off-by: Michael Nosthoff <committed@heine.so> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 99956a9e08251a1234434b492875b1eaff502a12 upstream.

the type flag is stored in the chip->flags field not in the
client->flags field. This currently leads to never using the ti
specific health function as client->flags doesn't use that bit.
So it's always falling back to the general one.

Fixes: 76b16f4cdfb8 ("power: supply: sbs-battery: don't assume MANUFACTURER_DATA formats")
Cc: <stable@vger.kernel.org>
Signed-off-by: Michael Nosthoff <committed@heine.so>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
power: supply: register HWMON devices with valid names 2019-10-07T17:01:36+00:00 Romain Izard romain.izard.pro@gmail.com 2019-08-30T13:15:56+00:00 d076d0facf7bc24469501fc9d29e38338df6ad70 [ Upstream commit f1b937cc86bedf94dbc3478c2c0dc79471081fff ] With the introduction of the HWMON compatibility layer to the power supply framework in Linux 5.3, all power supply devices' names can be used directly to create HWMON devices with the same names. But HWMON has rules on allowable names that are different from those used in the power supply framework. The dash character is forbidden, as it is used by the libsensors library in userspace as a separator, whereas this character is used in the device names in more than half of the existing power supply drivers. This last case is consistent with the typical naming usage with MFD and Device Tree. This leads to warnings in the kernel log, with the format: power_supply gpio-charger: hwmon: \ 'gpio-charger' is not a valid name attribute, please fix Add a protection to power_supply_add_hwmon_sysfs() that replaces any dash in the device name with an underscore when registering with the HWMON framework. Other forbidden characters (star, slash, space, tab, newline) are not replaced, as they are not in common use. Fixes: e67d4dfc9ff1 ("power: supply: Add HWMON compatibility layer") Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f1b937cc86bedf94dbc3478c2c0dc79471081fff ]

With the introduction of the HWMON compatibility layer to the power
supply framework in Linux 5.3, all power supply devices' names can be
used directly to create HWMON devices with the same names.

But HWMON has rules on allowable names that are different from those
used in the power supply framework. The dash character is forbidden, as
it is used by the libsensors library in userspace as a separator,
whereas this character is used in the device names in more than half of
the existing power supply drivers. This last case is consistent with the
typical naming usage with MFD and Device Tree.

This leads to warnings in the kernel log, with the format:

power_supply gpio-charger: hwmon: \
	'gpio-charger' is not a valid name attribute, please fix

Add a protection to power_supply_add_hwmon_sysfs() that replaces any
dash in the device name with an underscore when registering with the
HWMON framework. Other forbidden characters (star, slash, space, tab,
newline) are not replaced, as they are not in common use.

Fixes: e67d4dfc9ff1 ("power: supply: Add HWMON compatibility layer")
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
power: supply: ab8500_charger: Mark expected switch fall-through 2019-08-21T00:43:33+00:00 Gustavo A. R. Silva gustavo@embeddedor.com 2019-08-20T20:55:26+00:00 5274fdba8e3c04e9ac1ba457379afc8835f9aa0f Mark switch cases where we are expecting to fall through. Fix the following warning (Building: allmodconfig arm): drivers/power/supply/ab8500_charger.c: In function ‘ab8500_charger_max_usb_curr’: drivers/power/supply/ab8500_charger.c:738:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (di->vbus_detected) { ^ drivers/power/supply/ab8500_charger.c:745:2: note: here case USB_STAT_HM_IDGND: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> 
Mark switch cases where we are expecting to fall through.

Fix the following warning (Building: allmodconfig arm):

drivers/power/supply/ab8500_charger.c: In function ‘ab8500_charger_max_usb_curr’:
drivers/power/supply/ab8500_charger.c:738:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (di->vbus_detected) {
      ^
drivers/power/supply/ab8500_charger.c:745:2: note: here
  case USB_STAT_HM_IDGND:
  ^~~~

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Merge tag 'for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply 2019-07-16T04:06:15+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-07-16T04:06:15+00:00 5fe7b600a116187e10317d83fb56922c4ef6b76d Pull power supply and reset updates from Sebastian Reichel: "Core: - add HWMON compat layer - new properties: - input power limit - input voltage limit Drivers: - qcom-pon: add gen2 support - new driver for storing reboot move in NVMEM - new driver for Wilco EC charger configuration - simplify getting the adapter of a client" * tag 'for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: reset: nvmem-reboot-mode: add CONFIG_OF dependency power_supply: wilco_ec: Add charging config driver power: supply: cros: allow to set input voltage and current limit power: supply: add input power and voltage limit properties power: supply: fix semicolon.cocci warnings power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write interface dt-bindings: power: reset: add document for NVMEM based reboot-mode reset: qcom-pon: Add support for gen2 pon dt-bindings: power: reset: qcom: Add qcom,pm8998-pon compatibility line power: supply: Add HWMON compatibility layer power: supply: sbs-manager: simplify getting the adapter of a client power: supply: rt9455_charger: simplify getting the adapter of a client power: supply: rt5033_battery: simplify getting the adapter of a client power: supply: max17042_battery: simplify getting the adapter of a client power: supply: max17040_battery: simplify getting the adapter of a client power: supply: max14656_charger_detector: simplify getting the adapter of a client power: supply: bq25890_charger: simplify getting the adapter of a client power: supply: bq24257_charger: simplify getting the adapter of a client power: supply: bq24190_charger: simplify getting the adapter of a client 
Pull power supply and reset updates from Sebastian Reichel:
 "Core:
   - add HWMON compat layer
   - new properties:
       - input power limit
       - input voltage limit

  Drivers:
   - qcom-pon: add gen2 support
   - new driver for storing reboot move in NVMEM
   - new driver for Wilco EC charger configuration
   - simplify getting the adapter of a client"

* tag 'for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: reset: nvmem-reboot-mode: add CONFIG_OF dependency
  power_supply: wilco_ec: Add charging config driver
  power: supply: cros: allow to set input voltage and current limit
  power: supply: add input power and voltage limit properties
  power: supply: fix semicolon.cocci warnings
  power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write interface
  dt-bindings: power: reset: add document for NVMEM based reboot-mode
  reset: qcom-pon: Add support for gen2 pon
  dt-bindings: power: reset: qcom: Add qcom,pm8998-pon compatibility line
  power: supply: Add HWMON compatibility layer
  power: supply: sbs-manager: simplify getting the adapter of a client
  power: supply: rt9455_charger: simplify getting the adapter of a client
  power: supply: rt5033_battery: simplify getting the adapter of a client
  power: supply: max17042_battery: simplify getting the adapter of a client
  power: supply: max17040_battery: simplify getting the adapter of a client
  power: supply: max14656_charger_detector: simplify getting the adapter of a client
  power: supply: bq25890_charger: simplify getting the adapter of a client
  power: supply: bq24257_charger: simplify getting the adapter of a client
  power: supply: bq24190_charger: simplify getting the adapter of a client
Merge tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci 2019-07-16T03:44:49+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-07-16T03:44:49+00:00 fb4da215ed92f564f7ca090bb81a199b0d6cab8a Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Evaluate PCI Boot Configuration _DSM to learn if firmware wants us to preserve its resource assignments (Benjamin Herrenschmidt) - Simplify resource distribution (Nicholas Johnson) - Decode 32 GT/s link speed (Gustavo Pimentel) Virtualization: - Fix incorrect caching of VF config space size (Alex Williamson) - Fix VF driver probing sysfs knobs (Alex Williamson) Peer-to-peer DMA: - Fix dma_virt_ops check (Logan Gunthorpe) Altera host bridge driver: - Allow building as module (Ley Foon Tan) Armada 8K host bridge driver: - add PHYs support (Miquel Raynal) DesignWare host bridge driver: - Export APIs to support removable loadable module (Vidya Sagar) - Enable Relaxed Ordering erratum workaround only on Tegra20 & Tegra30 (Vidya Sagar) Hyper-V host bridge driver: - Fix use-after-free in eject (Dexuan Cui) Mobiveil host bridge driver: - Clean up and fix many issues, including non-identify mapped windows, 64-bit windows, multi-MSI, class code, INTx clearing (Hou Zhiqiang) Qualcomm host bridge driver: - Use clk bulk API for 2.4.0 controllers (Bjorn Andersson) - Add QCS404 support (Bjorn Andersson) - Assert PERST for at least 100ms (Niklas Cassel) R-Car host bridge driver: - Add r8a774a1 DT support (Biju Das) Tegra host bridge driver: - Add support for Gen2, opportunistic UpdateFC and ACK (PCIe protocol details) AER, GPIO-based PERST# (Manikanta Maddireddy) - Fix many issues, including power-on failure cases, interrupt masking in suspend, UPHY settings, AFI dynamic clock gating, pending DLL transactions (Manikanta Maddireddy) Xilinx host bridge driver: - Fix NWL Multi-MSI programming (Bharat Kumar Gogada) Endpoint support: - Fix 64bit BAR support (Alan Mikhak) - Fix pcitest build issues (Alan Mikhak, Andy Shevchenko) Bug fixes: - Fix NVIDIA GPU multi-function power dependencies (Abhishek Sahu) - Fix NVIDIA GPU HDA enablement issue (Lukas Wunner) - Ignore lockdep for sysfs "remove" (Marek Vasut) Misc: - Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)" * tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits) PCI: Enable NVIDIA HDA controllers tools: PCI: Fix installation when `make tools/pci_install` PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB PCI: Fix typos and whitespace errors PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr() PCI: mobiveil: Fix infinite-loop in the INTx handling function PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup PCI: mobiveil: Clear the control fields before updating it PCI: mobiveil: Add configured inbound windows counter PCI: mobiveil: Fix the valid check for inbound and outbound windows PCI: mobiveil: Clean-up program_{ib/ob}_windows() PCI: mobiveil: Remove an unnecessary return value check PCI: mobiveil: Fix error return values PCI: mobiveil: Refactor the MEM/IO outbound window initialization PCI: mobiveil: Make some register updates more readable PCI: mobiveil: Reformat the code for readability dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional ... 
Pull PCI updates from Bjorn Helgaas:
 "Enumeration changes:

   - Evaluate PCI Boot Configuration _DSM to learn if firmware wants us
     to preserve its resource assignments (Benjamin Herrenschmidt)

   - Simplify resource distribution (Nicholas Johnson)

   - Decode 32 GT/s link speed (Gustavo Pimentel)

  Virtualization:

   - Fix incorrect caching of VF config space size (Alex Williamson)

   - Fix VF driver probing sysfs knobs (Alex Williamson)

  Peer-to-peer DMA:

   - Fix dma_virt_ops check (Logan Gunthorpe)

  Altera host bridge driver:

   - Allow building as module (Ley Foon Tan)

  Armada 8K host bridge driver:

   - add PHYs support (Miquel Raynal)

  DesignWare host bridge driver:

   - Export APIs to support removable loadable module (Vidya Sagar)

   - Enable Relaxed Ordering erratum workaround only on Tegra20 &
     Tegra30 (Vidya Sagar)

  Hyper-V host bridge driver:

   - Fix use-after-free in eject (Dexuan Cui)

  Mobiveil host bridge driver:

   - Clean up and fix many issues, including non-identify mapped
     windows, 64-bit windows, multi-MSI, class code, INTx clearing (Hou
     Zhiqiang)

  Qualcomm host bridge driver:

   - Use clk bulk API for 2.4.0 controllers (Bjorn Andersson)

   - Add QCS404 support (Bjorn Andersson)

   - Assert PERST for at least 100ms (Niklas Cassel)

  R-Car host bridge driver:

   - Add r8a774a1 DT support (Biju Das)

  Tegra host bridge driver:

   - Add support for Gen2, opportunistic UpdateFC and ACK (PCIe protocol
     details) AER, GPIO-based PERST# (Manikanta Maddireddy)

   - Fix many issues, including power-on failure cases, interrupt
     masking in suspend, UPHY settings, AFI dynamic clock gating,
     pending DLL transactions (Manikanta Maddireddy)

  Xilinx host bridge driver:

   - Fix NWL Multi-MSI programming (Bharat Kumar Gogada)

  Endpoint support:

   - Fix 64bit BAR support (Alan Mikhak)

   - Fix pcitest build issues (Alan Mikhak, Andy Shevchenko)

  Bug fixes:

   - Fix NVIDIA GPU multi-function power dependencies (Abhishek Sahu)

   - Fix NVIDIA GPU HDA enablement issue (Lukas Wunner)

   - Ignore lockdep for sysfs "remove" (Marek Vasut)

  Misc:

   - Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)"

* tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits)
  PCI: Enable NVIDIA HDA controllers
  tools: PCI: Fix installation when `make tools/pci_install`
  PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB
  PCI: Fix typos and whitespace errors
  PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr()
  PCI: mobiveil: Fix infinite-loop in the INTx handling function
  PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine
  PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window
  PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window
  PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup
  PCI: mobiveil: Clear the control fields before updating it
  PCI: mobiveil: Add configured inbound windows counter
  PCI: mobiveil: Fix the valid check for inbound and outbound windows
  PCI: mobiveil: Clean-up program_{ib/ob}_windows()
  PCI: mobiveil: Remove an unnecessary return value check
  PCI: mobiveil: Fix error return values
  PCI: mobiveil: Refactor the MEM/IO outbound window initialization
  PCI: mobiveil: Make some register updates more readable
  PCI: mobiveil: Reformat the code for readability
  dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional
  ...
Merge tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd 2019-07-16T03:18:40+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-07-16T03:18:40+00:00 8de262531f5fbb7458463224a7587429800c24bf Pull MFD updates from Lee Jones: "Core Frameworks: - Set 'struct device' fwnode when registering a new device New Drivers: - Add support for ROHM BD70528 PMIC New Device Support: - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC - Add support for RK809 and RK817 to Rockchip RK808 - Add support for Lid Angle to ChromeOS core - Add support for CS47L15 CODEC to Madera core - Add support for CS47L92 CODEC to Madera core - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core - Add support for Add Intel Elkhart Lake PCH to Intel LPSS New Functionality: - Provide regulator supply information when registering; madera-core - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic - Allow over-riding power button press via Device Tree; rohm-bd718x7 - Differentiate between running processors; cros_ec_dev Fix-ups: - Big header file update; cros_ec_commands.h - Split header per-subsystem; rohm-bd718x7 - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables - Trivial; sorting, coding style; intel-lpss-pci - Only remove Power Off functionality if set locally; rk808 - Make use for Power Off Prepare(); rk808 - Fix spelling mistake in header guards; stmfx - Properly free IDA resources - SPDX fixups; cs47lXX-tables, madera - Error path fixups; hi655x-pmic Bug Fixes: - Add missing break in case() statement - Repair undefined behaviour when not initialising variables; arizona-core, madera-core - Fix reference to Device Tree documentation; madera" * tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits) mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk mfd: madera: Fixup SPDX headers mfd: madera: Remove some unused registers and fix some defaults mfd: intel-lpss: Release IDA resources mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs mfd: cs5535-mfd: Remove ifdef OLPC noise mfd: stmfx: Fix macro definition spelling dt-bindings: mfd: Add link to ROHM BD71847 Datasheet MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice mfd: rk808: Prepare rk805 for poweroff mfd: rk808: Check pm_power_off pointer mfd: cros_ec: differentiate SCP from EC by feature bit dt-bindings: Add binding for cros-ec-rpmsg mfd: madera: Add Madera core support for CS47L92 mfd: madera: Add Madera core support for CS47L15 mfd: madera: Update DT bindings to add additional CODECs mfd: madera: Add supply mapping for MICVDD mfd: madera: Fix potential uninitialised use of variable mfd: madera: Fix bad reference to pinctrl.txt file ... 
Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Set 'struct device' fwnode when registering a new device

  New Drivers:
   - Add support for ROHM BD70528 PMIC

  New Device Support:
   - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC
   - Add support for RK809 and RK817 to Rockchip RK808
   - Add support for Lid Angle to ChromeOS core
   - Add support for CS47L15 CODEC to Madera core
   - Add support for CS47L92 CODEC to Madera core
   - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core
   - Add support for Add Intel Elkhart Lake PCH to Intel LPSS

  New Functionality:
   - Provide regulator supply information when registering; madera-core
   - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic
   - Allow over-riding power button press via Device Tree; rohm-bd718x7
   - Differentiate between running processors; cros_ec_dev

  Fix-ups:
   - Big header file update; cros_ec_commands.h
   - Split header per-subsystem; rohm-bd718x7
   - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables
   - Trivial; sorting, coding style; intel-lpss-pci
   - Only remove Power Off functionality if set locally; rk808
   - Make use for Power Off Prepare(); rk808
   - Fix spelling mistake in header guards; stmfx
   - Properly free IDA resources
   - SPDX fixups; cs47lXX-tables, madera
   - Error path fixups; hi655x-pmic

  Bug Fixes:
   - Add missing break in case() statement
   - Repair undefined behaviour when not initialising variables; arizona-core, madera-core
   - Fix reference to Device Tree documentation; madera"

* tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits)
  mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk
  mfd: madera: Fixup SPDX headers
  mfd: madera: Remove some unused registers and fix some defaults
  mfd: intel-lpss: Release IDA resources
  mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs
  mfd: cs5535-mfd: Remove ifdef OLPC noise
  mfd: stmfx: Fix macro definition spelling
  dt-bindings: mfd: Add link to ROHM BD71847 Datasheet
  MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS
  mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice
  mfd: rk808: Prepare rk805 for poweroff
  mfd: rk808: Check pm_power_off pointer
  mfd: cros_ec: differentiate SCP from EC by feature bit
  dt-bindings: Add binding for cros-ec-rpmsg
  mfd: madera: Add Madera core support for CS47L92
  mfd: madera: Add Madera core support for CS47L15
  mfd: madera: Update DT bindings to add additional CODECs
  mfd: madera: Add supply mapping for MICVDD
  mfd: madera: Fix potential uninitialised use of variable
  mfd: madera: Fix bad reference to pinctrl.txt file
  ...
Merge tag 'platform-drivers-x86-v5.3-1' of git://git.infradead.org/linux-platform-drivers-x86 2019-07-14T23:51:47+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-07-14T23:51:47+00:00 55167453111d3a1e600e29ba6c8e63906bb4821b Pull x86 platform driver updates from Andy Shevchenko: "Gathered a bunch of x86 platform driver changes. It's rather big, since includes two big refactors and completely new driver: - ASUS WMI driver got a big refactoring in order to support the TUF Gaming laptops. Besides that, the regression with backlight being permanently off on various EeePC laptops has been fixed. - Accelerometer on HP ProBook 450 G0 shows wrong measurements due to X axis being inverted. This has been fixed. - Intel PMC core driver has been extended to be ACPI enumerated if the DSDT provides device with _HID "INT33A1". This allows to convert the driver to be pure platform and support new hardware purely based on ACPI DSDT. - From now on the Intel Speed Select Technology is supported thru a corresponding driver. This driver provides an access to the features of the ISST, such as Performance Profile, Core Power, Base frequency and Turbo Frequency. - Mellanox platform drivers has been refactored and now extended to support more systems, including new coming ones. - The OLPC XO-1.75 platform is now supported. - CB4063 Beckhoff Automation board is using PMC clocks, provided via pmc_atom driver, for ethernet controllers in a way that they can't be managed by the clock driver. The quirk has been extended to cover this case. - Touchscreen on Chuwi Hi10 Plus tablet has been enabled. Meanwhile the information of Chuwi Hi10 Air has been fixed to cover more models based on the same platform. - Xiaomi notebooks have WMI interface enabled. Thus, the driver to support it has been provided. It required some extension of the generic WMI library, which allows to propagate opaque context to the ->probe() of the individual drivers. This release includes debugfs clean up from Greg KH for several drivers that drop return code check and make debugfs absence or failure non-fatal. Also miscellaneous fixes here and there, mostly for Acer WMI and various Intel drivers" * tag 'platform-drivers-x86-v5.3-1' of git://git.infradead.org/linux-platform-drivers-x86: (74 commits) platform/x86: Fix PCENGINES_APU2 Kconfig warning tools/power/x86/intel-speed-select: Add .gitignore file platform/x86: mlx-platform: Fix error handling in mlxplat_init() platform/x86: intel_pmc_core: Attach using APCI HID "INT33A1" platform/x86: intel_pmc_core: transform Pkg C-state residency from TSC ticks into microseconds platform/x86: asus-wmi: Use dev_get_drvdata() Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces platform/x86: mlx-platform: Add more reset cause attributes platform/x86: mlx-platform: Modify DMI matching order platform/x86: mlx-platform: Add regmap structure for the next generation systems platform/x86: mlx-platform: Change API for i2c-mlxcpld driver activation platform/x86: mlx-platform: Move regmap initialization before all drivers activation MAINTAINERS: Update for Intel Speed Select Technology tools/power/x86: A tool to validate Intel Speed Select commands platform/x86: ISST: Restore state on resume platform/x86: ISST: Add Intel Speed Select PUNIT MSR interface platform/x86: ISST: Add Intel Speed Select mailbox interface via MSRs platform/x86: ISST: Add Intel Speed Select mailbox interface via PCI platform/x86: ISST: Add Intel Speed Select mmio interface platform/x86: ISST: Add IOCTL to Translate Linux logical CPU to PUNIT CPU number ... 
Pull x86 platform driver updates from Andy Shevchenko:
 "Gathered a bunch of x86 platform driver changes. It's rather big,
  since includes two big refactors and completely new driver:

   - ASUS WMI driver got a big refactoring in order to support the TUF
     Gaming laptops. Besides that, the regression with backlight being
     permanently off on various EeePC laptops has been fixed.

   - Accelerometer on HP ProBook 450 G0 shows wrong measurements due to
     X axis being inverted. This has been fixed.

   - Intel PMC core driver has been extended to be ACPI enumerated if
     the DSDT provides device with _HID "INT33A1". This allows to
     convert the driver to be pure platform and support new hardware
     purely based on ACPI DSDT.

   - From now on the Intel Speed Select Technology is supported thru a
     corresponding driver. This driver provides an access to the
     features of the ISST, such as Performance Profile, Core Power, Base
     frequency and Turbo Frequency.

   - Mellanox platform drivers has been refactored and now extended to
     support more systems, including new coming ones.

   - The OLPC XO-1.75 platform is now supported.

   - CB4063 Beckhoff Automation board is using PMC clocks, provided via
     pmc_atom driver, for ethernet controllers in a way that they can't
     be managed by the clock driver. The quirk has been extended to
     cover this case.

   - Touchscreen on Chuwi Hi10 Plus tablet has been enabled. Meanwhile
     the information of Chuwi Hi10 Air has been fixed to cover more
     models based on the same platform.

   - Xiaomi notebooks have WMI interface enabled. Thus, the driver to
     support it has been provided. It required some extension of the
     generic WMI library, which allows to propagate opaque context to
     the ->probe() of the individual drivers.

  This release includes debugfs clean up from Greg KH for several
  drivers that drop return code check and make debugfs absence or
  failure non-fatal.

  Also miscellaneous fixes here and there, mostly for Acer WMI and
  various Intel drivers"

* tag 'platform-drivers-x86-v5.3-1' of git://git.infradead.org/linux-platform-drivers-x86: (74 commits)
  platform/x86: Fix PCENGINES_APU2 Kconfig warning
  tools/power/x86/intel-speed-select: Add .gitignore file
  platform/x86: mlx-platform: Fix error handling in mlxplat_init()
  platform/x86: intel_pmc_core: Attach using APCI HID "INT33A1"
  platform/x86: intel_pmc_core: transform Pkg C-state residency from TSC ticks into microseconds
  platform/x86: asus-wmi: Use dev_get_drvdata()
  Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
  platform/x86: mlx-platform: Add more reset cause attributes
  platform/x86: mlx-platform: Modify DMI matching order
  platform/x86: mlx-platform: Add regmap structure for the next generation systems
  platform/x86: mlx-platform: Change API for i2c-mlxcpld driver activation
  platform/x86: mlx-platform: Move regmap initialization before all drivers activation
  MAINTAINERS: Update for Intel Speed Select Technology
  tools/power/x86: A tool to validate Intel Speed Select commands
  platform/x86: ISST: Restore state on resume
  platform/x86: ISST: Add Intel Speed Select PUNIT MSR interface
  platform/x86: ISST: Add Intel Speed Select mailbox interface via MSRs
  platform/x86: ISST: Add Intel Speed Select mailbox interface via PCI
  platform/x86: ISST: Add Intel Speed Select mmio interface
  platform/x86: ISST: Add IOCTL to Translate Linux logical CPU to PUNIT CPU number
  ...
power: reset: nvmem-reboot-mode: add CONFIG_OF dependency 2019-07-08T22:28:49+00:00 Arnd Bergmann arnd@arndb.de 2019-07-08T12:52:39+00:00 caa2b557841c8cedc1d4862cd31cf76ee940d105 Without CONFIG_OF, we get a build failure in the reboot-mode implementation: drivers/power/reset/reboot-mode.c: In function 'reboot_mode_register': drivers/power/reset/reboot-mode.c:72:2: error: implicit declaration of function 'for_each_property_of_node'; did you mean 'for_each_child_of_node'? [-Werror=implicit-function-declaration] for_each_property_of_node(np, prop) { Add a Kconfig dependency like we have for the other users of CONFIG_REBOOT_MODE. Fixes: 7a78a7f7695b ("power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write interface") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> 
Without CONFIG_OF, we get a build failure in the reboot-mode
implementation:

drivers/power/reset/reboot-mode.c: In function 'reboot_mode_register':
drivers/power/reset/reboot-mode.c:72:2: error: implicit declaration of function 'for_each_property_of_node'; did you mean 'for_each_child_of_node'? [-Werror=implicit-function-declaration]
  for_each_property_of_node(np, prop) {

Add a Kconfig dependency like we have for the other users of
CONFIG_REBOOT_MODE.

Fixes: 7a78a7f7695b ("power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Merge branches 'pm-opp', 'pm-misc', 'pm-avs' and 'pm-tools' 2019-07-08T08:59:38+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2019-07-08T08:59:38+00:00 13b06b78c772d64e2207e4a5a5329856fe2bf241 * pm-opp: opp: Don't use IS_ERR on invalid supplies opp: Make dev_pm_opp_set_rate() handle freq = 0 to drop performance votes opp: Don't overwrite rounded clk rate opp: Allocate genpd_virt_devs from dev_pm_opp_attach_genpd() opp: Attach genpds to devices from within OPP core * pm-misc: PM / clk: Remove error message on out-of-memory condition drivers: base: power: clock_ops: Use of_clk_get_parent_count() * pm-avs: power: avs: smartreflex: no need to check return value of debugfs_create functions * pm-tools: cpupower : frequency-set -r option misses the last cpu in related cpu list cpupower: correct spelling of interval Add README and update pm-graph and sleepgraph docs Update to pm-graph 5.4 Update to pm-graph 5.3 
* pm-opp:
  opp: Don't use IS_ERR on invalid supplies
  opp: Make dev_pm_opp_set_rate() handle freq = 0 to drop performance votes
  opp: Don't overwrite rounded clk rate
  opp: Allocate genpd_virt_devs from dev_pm_opp_attach_genpd()
  opp: Attach genpds to devices from within OPP core

* pm-misc:
  PM / clk: Remove error message on out-of-memory condition
  drivers: base: power: clock_ops: Use of_clk_get_parent_count()

* pm-avs:
  power: avs: smartreflex: no need to check return value of debugfs_create functions

* pm-tools:
  cpupower : frequency-set -r option misses the last cpu in related cpu list
  cpupower: correct spelling of interval
  Add README and update pm-graph and sleepgraph docs
  Update to pm-graph 5.4
  Update to pm-graph 5.3