linux-stable.git/drivers/power, branch v4.9.282

power: supply: rt5033_battery: Fix device tree enumeration

2021-07-20T14:21:14+00:00

[ Upstream commit f3076cd8d1d5fa64b5e1fa5affc045c2fc123baa ]

The fuel gauge in the RT5033 PMIC has its own I2C bus and interrupt
line. Therefore, it is not actually part of the RT5033 MFD and needs
its own of_match_table to probe properly.

Also, given that it's independent of the MFD, there is actually
no need to make the Kconfig depend on MFD_RT5033. Although the driver
uses the shared  header, there is no compile
or runtime dependency on the RT5033 MFD driver.

Cc: Beomho Seo 
Cc: Chanwoo Choi 
Fixes: b847dd96e659 ("power: rt5033_battery: Add RT5033 Fuel gauge device driver")
Signed-off-by: Stephan Gerhold 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Sasha Levin

power: supply: ab8500: add missing MODULE_DEVICE_TABLE

2021-07-20T14:21:13+00:00

[ Upstream commit dfe52db13ab8d24857a9840ec7ca75eef800c26c ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot 
Signed-off-by: Zou Wei 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Sasha Levin

power: supply: charger-manager: add missing MODULE_DEVICE_TABLE

2021-07-20T14:21:13+00:00

[ Upstream commit 073b5d5b1f9cc94a3eea25279fbafee3f4f5f097 ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot 
Signed-off-by: Zou Wei 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Sasha Levin

power: reset: gpio-poweroff: add missing MODULE_DEVICE_TABLE

2021-07-20T14:21:13+00:00

[ Upstream commit ed3443fb4df4e140a22f65144546c8a8e1e27f4e ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot 
Signed-off-by: Bixuan Cui 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Sasha Levin

power: supply: ab8500: Avoid NULL pointers

2021-07-20T14:21:13+00:00

[ Upstream commit 5bcb5087c9dd3dca1ff0ebd8002c5313c9332b56 ]

Sometimes the code will crash because we haven't enabled
AC or USB charging and thus not created the corresponding
psy device. Fix it by checking that it is there before
notifying.

Signed-off-by: Linus Walleij 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Sasha Levin

power: supply: s3c_adc_battery: fix possible use-after-free in s3c_adc_bat_remove()

2021-05-22T08:40:18+00:00

[ Upstream commit 68ae256945d2abe9036a7b68af4cc65aff79d5b7 ]

This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.

Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.

Reported-by: Hulk Robot 
Signed-off-by: Yang Yingliang 
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Sasha Levin

power: supply: generic-adc-battery: fix possible use-after-free in gab_remove()

2021-05-22T08:40:17+00:00

[ Upstream commit b6cfa007b3b229771d9588970adb4ab3e0487f49 ]

This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.

Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.

Reported-by: Hulk Robot 
Signed-off-by: Yang Yingliang 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Sasha Levin

power: supply: Use IRQF_ONESHOT

2021-05-22T08:40:17+00:00

[ Upstream commit 2469b836fa835c67648acad17d62bc805236a6ea ]

Fixes coccicheck error:

drivers/power/supply/pm2301_charger.c:1089:7-27: ERROR:
drivers/power/supply/lp8788-charger.c:502:8-28: ERROR:
drivers/power/supply/tps65217_charger.c:239:8-33: ERROR:
drivers/power/supply/tps65090-charger.c:303:8-33: ERROR:

Threaded IRQ with no primary handler requested without IRQF_ONESHOT

Signed-off-by: dongjian 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Sasha Levin

power: reset: at91-sama5d2_shdwc: fix wkupdbc mask

2021-03-03T16:44:37+00:00

[ Upstream commit 95aa21a3f1183260db1b0395e03df5bebc5ed641 ]

According to datasheet WKUPDBC mask is b/w bits 26..24.

Fixes: f80cb48843987 ("power: reset: at91-shdwc: add new shutdown controller driver")
Signed-off-by: Claudiu Beznea 
Reviewed-by: Alexandre Belloni 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Sasha Levin

power: supply: test_power: add missing newlines when printing parameters by sysfs

2020-11-10T09:23:54+00:00

[ Upstream commit c07fa6c1631333f02750cf59f22b615d768b4d8f ]

When I cat some module parameters by sysfs, it displays as follows.
It's better to add a newline for easy reading.

root@syzkaller:~# cd /sys/module/test_power/parameters/
root@syzkaller:/sys/module/test_power/parameters# cat ac_online
onroot@syzkaller:/sys/module/test_power/parameters# cat battery_present
trueroot@syzkaller:/sys/module/test_power/parameters# cat battery_health
goodroot@syzkaller:/sys/module/test_power/parameters# cat battery_status
dischargingroot@syzkaller:/sys/module/test_power/parameters# cat battery_technology
LIONroot@syzkaller:/sys/module/test_power/parameters# cat usb_online
onroot@syzkaller:/sys/module/test_power/parameters#

Signed-off-by: Xiongfeng Wang 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Sasha Levin