linux-stable.git/drivers/power/reset, branch v6.8

power: reset: at91: Drop '__init' from at91_wakeup_status()

2023-12-24T22:43:10+00:00

When building with clang, there are two section mismatch warnings:

  WARNING: modpost: vmlinux: section mismatch in reference: at91_poweroff_probe+0x7c (section: .text) -> at91_wakeup_status (section: .init.text)
  WARNING: modpost: vmlinux: section mismatch in reference: at91_shdwc_probe+0xcc (section: .text) -> at91_wakeup_status (section: .init.text)

Drop '__init' from at91_wakeup_status() to clear up the mismatch.

Fixes: dde74a5de817 ("power: reset: at91-sama5d2_shdwc: Stop using module_platform_driver_probe()")
Fixes: 099806de68b7 ("power: reset: at91-poweroff: Stop using module_platform_driver_probe()")
Signed-off-by: Nathan Chancellor 
Acked-by: Nicolas Ferre 
Reviewed-by: Uwe Kleine-König 
Signed-off-by: Sebastian Reichel

power: reset: gpio-restart: Use devm_register_sys_off_handler()

2023-12-24T21:54:01+00:00

Use device life-cycle managed register function to simplify probe error
path and eliminate need for explicit remove function.

Signed-off-by: Andrew Davis 
Signed-off-by: Sebastian Reichel

power: reset: at91-sama5d2_shdwc: Convert to platform remove callback returning void

2023-11-15T22:15:40+00:00

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König 
Reviewed-by: Claudiu Beznea 
Link: https://lore.kernel.org/r/20231105094712.3706799-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel

power: reset: at91-reset: Convert to platform remove callback returning void

2023-11-15T22:15:40+00:00

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König 
Reviewed-by: Claudiu Beznea 
Link: https://lore.kernel.org/r/20231105094712.3706799-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel

power: reset: tps65086-restart: Convert to platform remove callback returning void

2023-11-15T22:15:40+00:00

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Returning an error if unregister_restart_handler() failed has no effect
but triggering another error message. So converting this driver to
.remove_new() has no effect but to suppress the duplicated error message.

Signed-off-by: Uwe Kleine-König 
Link: https://lore.kernel.org/r/20231104211501.3676352-30-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel

power: reset: syscon-poweroff: Convert to platform remove callback returning void

2023-11-15T22:15:39+00:00

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König 
Link: https://lore.kernel.org/r/20231104211501.3676352-29-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel

power: reset: rmobile-reset: Convert to platform remove callback returning void

2023-11-15T22:15:39+00:00

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König 
Link: https://lore.kernel.org/r/20231104211501.3676352-28-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel

power: reset: restart-poweroff: Convert to platform remove callback returning void

2023-11-15T22:15:39+00:00

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König 
Link: https://lore.kernel.org/r/20231104211501.3676352-27-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel

power: reset: regulator-poweroff: Convert to platform remove callback returning void

2023-11-15T22:15:39+00:00

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König 
Link: https://lore.kernel.org/r/20231104211501.3676352-26-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel

power: reset: qnap-poweroff: Convert to platform remove callback returning void

2023-11-15T22:15:39+00:00

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König 
Link: https://lore.kernel.org/r/20231104211501.3676352-25-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel