linux-stable.git/drivers/power/reset, branch linux-6.16.y

power: reset: POWER_RESET_TORADEX_EC should depend on ARCH_MXC

2025-08-15T14:38:59+00:00

[ Upstream commit 22e4d29f081df8a10f1c062d3d952bb876eb9bdc ]

The Toradex Embedded Controller is currently only present on Toradex
SMARC iMX8MP and iMX95 SoMs.  Hence add a dependency on ARCH_MXC, to
prevent asking the user about this driver when configuring a kernel
without NXP i.MX SoC family support.

Fixes: 18672fe12367ed44 ("power: reset: add Toradex Embedded Controller")
Signed-off-by: Geert Uytterhoeven 
Link: https://lore.kernel.org/r/1ef0beb1e09bf914650f9f9885a33af06772540d.1746536287.git.geert+renesas@glider.be
Signed-off-by: Sebastian Reichel 
Signed-off-by: Sasha Levin

power: reset: syscon-reboot: add gs101-specific reset

2025-04-30T22:41:31+00:00

Linux supports a couple different reset modes, but this driver here
doesn't distinguish between them and issues the same syscon register
write irrespective of the reset mode requested by the kernel.

Since DTs should not encode register writes (see e.g. [1]), update this
driver to support different reset modes based on DT compatible match.

At the same time, add support for Google GS101, which does support
cold, hard, warm, and soft.

As an example why this is useful, other than properly supporting the
Linux reboot= kernel command line option or sysfs entry, this change
allows gs101-platforms to default to a more secure cold-reset, but also
to warm-reset in case RAM contents needs to be retained across the
reset.

Link: https://lore.kernel.org/all/20250227132644.GA1924628-robh@kernel.org/ [1]
Signed-off-by: André Draszik 
Link: https://lore.kernel.org/r/20250401-syscon-reboot-reset-mode-v5-2-5b9357442363@linaro.org
Signed-off-by: Sebastian Reichel

power: reset: add Toradex Embedded Controller

2025-04-28T23:13:10+00:00

Toradex SMARC iMX8MP and SMARC iMX95 SoM modules use a small Embedded
Controller (EC) to manage power and reset functions and related SMARC
signals.

This driver implements power-off and reboot handlers, communicating with
the EC via I2C to issue the appropriate power management commands.

During probe, the driver logs the Embedded Controller ID (unique ID for
each SMARC board supported) in hex format along with the firmware version.

Signed-off-by: Emanuele Ghidoli 
Signed-off-by: Francesco Dolcini 
Link: https://lore.kernel.org/r/20250414171455.155155-3-francesco@dolcini.it
Signed-off-by: Sebastian Reichel

power: reset: reboot-mode: better compatibility with DT (replace ' ,/')

2025-04-27T22:05:31+00:00

This driver's purpose is to parse boot modes described in DT, via key
(node name) / value pairs, and to match them to a reboot mode requested
by the kernel. Unfortunately, DT node names can not contain certain
characters, like space ' ' or comma ',' or slash '/', while the
requested reboot mode may.

This is a problem because it makes it impossible to match reboot modes
containing any of those characters.

For example, this makes it impossible to communicate DM verity errors
to the boot loader - DM verity errors trigger a reboot with mode
"dm-verity device corrupted" in drivers/md/dm-verity-target.c and
devices typically have to take action in that case [1]. Changing this
string itself is not feasible, see e.g. discussion in [2], but would
also just cover this one case.

Another example is Android, which may use comma in the reboot mode
string, e.g. as "shutdown,thermal" in [3].

The kernel also shouldn't prescribe what characters are allowed inside
the boot mode string for a user to set. It hasn't done this so far, and
introducing such a restriction would be an interface break and
arbitrarily enforce a random new policy.

Therefore, update this driver to do another round of string matching,
after replacing the common characters mentioned above with dash '-', if
a match hasn't been found without doing said replacement.
This now allows us to have DT entries of e.g.:

mode-dm-verity-device-corrupted = <...>

and so on.

Link: https://cs.android.com/android/kernel/superproject/+/android14-gs-pixel-6.1:private/google-modules/power/reset/exynos-gs101-reboot.c;l=144 [1]
Link: https://lore.kernel.org/all/CAAFS_9FuSb7PZwQ2itUh_H7ZdhvAEiiX7fhxJ4kmmv9JCaHmkA@mail.gmail.com/ [2]
Link: https://cs.android.com/android/platform/superproject/main/+/main:system/core/init/reboot_utils.cpp;drc=79ad1e2e9bf1628c141c8cd2fbb4f3df61a6ba75;l=122 [3]
Signed-off-by: André Draszik
Link: https://lore.kernel.org/r/20250307-reboot-mode-chars-v1-1-d83ff95da524@linaro.org
Signed-off-by: Sebastian Reichel

power: reset: at91-reset: Optimize at91_reset()

2025-04-27T21:59:08+00:00

This patch adds a small optimization to the low-level at91_reset()
function, which includes:
- Removes the extra branch, since the following store operations
  already have proper condition checks.
- Removes the definition of the clobber register r4, since it is
  no longer used in the code.

Fixes: fcd0532fac2a ("power: reset: at91-reset: make at91sam9g45_restart() generic")
Signed-off-by: Alexander Shiyan 
Reviewed-by: Alexandre Belloni 
Link: https://lore.kernel.org/r/20250307053809.20245-1-eagle.alexander923@gmail.com
Signed-off-by: Sebastian Reichel

Merge tag 'for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

2025-03-30T01:11:12+00:00

Pull power supply and reset updates from Sebastian Reichel:
 "Power-supply core:
   - remove unused set_charged infrastructure
   - drop of_node from power_supply struct

  Power-supply drivers:
   - axp717: support devices without thermistors
   - bq27xxx: support max design voltage for bq270x0 and bq27x10
   - pcf50633: drop charger driver
   - max1720x: add battery health support
   - switch all power-supply devices from of_node to fwnode
   - convert regmap users to maple tree register cache
   - convert drivers to devm_kmemdup_array
   - misc cleanups and fixes

  Reset drivers:
   - at91-sama5d2_shdwc: add sama7d65 support

* tag 'for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits)
  power: supply: mt6370: Remove redundant 'flush_workqueue()' calls
  Revert "power: supply: bq27xxx: do not report bogus zero values"
  power: supply: max77693: Fix wrong conversion of charge input threshold value
  power: supply: pcf50633: Remove charger
  power: supply: all: switch psy_cfg from of_node to fwnode
  power: supply: core: get rid of of_node
  power: reset: at91-sama5d2_shdwc: Add sama7d65 PMC
  power: supply: smb347: convert to use maple tree register cache
  power: supply: rt9455: convert to use maple tree register cache
  power: supply: max1720x: convert to use maple tree register cache
  power: supply: ltc4162l: convert to use maple tree register cache
  power: supply: bq25980: convert to use maple tree register cache
  power: supply: bq25890: convert to use maple tree register cache
  power: supply: bq2515x: convert to use maple tree register cache
  power: supply: bq24257: convert to use maple tree register cache
  power: supply: bd99954: convert to use maple tree register cache
  power: supply: Remove unused set_charged method
  power: supply: ds2760: Remove unused ds2760_battery_set_charged
  power: supply: core: Remove unused power_supply_set_battery_charged
  power: supply: sc27xx: use devm_kmemdup_array()
  ...

power: reset: at91-sama5d2_shdwc: Add sama7d65 PMC

2025-03-08T00:36:33+00:00

Add sama7d65-pmc compatible string to the list of valid PMC IDs.

Signed-off-by: Ryan Wanner 
Link: https://lore.kernel.org/r/c5fa1d88a072d79db4f1a6b99ad69632a83e8f8d.1740671156.git.Ryan.Wanner@microchip.com
Signed-off-by: Sebastian Reichel

power: reset: ltc2952-poweroff: Switch to use hrtimer_setup()

2025-02-18T10:19:04+00:00

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao 
Signed-off-by: Thomas Gleixner 
Acked-by: Zack Rusin 
Acked-by: Sebastian Reichel 
Link: https://lore.kernel.org/all/75ef5206f52f194b9c51653628cd2d0b083a482f.1738746904.git.namcao@linutronix.de

power: reset: keystone: Use syscon_regmap_lookup_by_phandle_args

2025-01-15T20:51:39+00:00

Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
syscon_regmap_lookup_by_phandle() combined with getting the syscon
argument.  Except simpler code this annotates within one line that given
phandle has arguments, so grepping for code would be easier.

There is also no real benefit in printing errors on missing syscon
argument, because this is done just too late: runtime check on
static/build-time data.  Dtschema and Devicetree bindings offer the
static/build-time check for this already.

Signed-off-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20250111185358.183725-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sebastian Reichel

power: reset: as3722-poweroff: Remove unnecessary return in as3722_poweroff_probe

2024-12-18T23:38:11+00:00

The return is executed on the devm_register_sys_off_handler() line in
as3722_poweroff_probe, so the last return line is unnecessary. Remove it.

Fixes: 348fde771ce7 ("power: reset: as3722-poweroff: Use devm_register_sys_off_handler(POWER_OFF)")
Signed-off-by: Nobuhiro Iwamatsu 
Acked-by: Andrew Davis 
Link: https://lore.kernel.org/r/20241117053443.1148902-1-iwamatsu@nigauri.org
Signed-off-by: Sebastian Reichel