linux-stable.git/drivers/power/reset/Kconfig, branch linux-5.2.y Linux kernel stable tree treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21T08:50:46+00:00 Thomas Gleixner tglx@linutronix.de 2019-05-19T12:07:45+00:00 ec8f24b7faaf3d4799a7c3f4c1b87f6b02778ad1 Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
power: reset: qcom-pon: Add Qcom PON driver 2018-07-06T13:53:58+00:00 Vinod Koul vkoul@kernel.org 2018-06-28T15:08:46+00:00 e6a578e2890dcedf1b5722d5bead9cad2e0d9195 Add support Qualcomm PM8xxx PON which is responsible for reboot mode support. Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> 
Add support Qualcomm PM8xxx PON which is responsible for reboot
mode support.

Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
power: reset: Add Spreadtrum SC27xx PMIC power off support 2018-03-09T16:11:31+00:00 Baolin Wang baolin.wang@linaro.org 2018-02-26T02:23:14+00:00 3f5faf3a0667ea39faf7152c5bdd4befb9e483a8 On Spreadtrum platform, we need power off system through external SC27xx series PMICs including the SC2720, SC2721, SC2723, SC2730 and SC2731 chips. Thus this patch adds SC27xx series PMICs power-off support. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> 
On Spreadtrum platform, we need power off system through external SC27xx
series PMICs including the SC2720, SC2721, SC2723, SC2730 and SC2731 chips.
Thus this patch adds SC27xx series PMICs power-off support.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
power: reset: Add a driver for the Microsemi Ocelot reset 2018-02-12T10:23:46+00:00 Alexandre Belloni alexandre.belloni@free-electrons.com 2018-01-16T10:12:35+00:00 6ab739bc1d00bfd10ed87a2f1fdc00ebdc0d7ff1 The Microsemi Ocelot SoC has a register allowing to reset the MIPS core. Unfortunately, the syscon-reboot driver can't be used directly (but almost) as the reset control may be disabled using another register. Cc: linux-pm@vger.kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> 
The Microsemi Ocelot SoC has a register allowing to reset the MIPS core.
Unfortunately, the syscon-reboot driver can't be used directly (but almost)
as the reset control may be disabled using another register.

Cc: linux-pm@vger.kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
power: reset: remove unused imx-snvs-poweroff driver 2018-01-08T17:09:25+00:00 Dong Aisheng aisheng.dong@nxp.com 2017-12-22T10:28:59+00:00 baf61639b808307bd6e5be27e5cbef9cc3acd80e There's no user of it in kernel now and it basically functions the same as the generic syscon-poweroff.c to which we have already switched. So let's remove it. Cc: Robin Gong <yibin.gong@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> 
There's no user of it in kernel now and it basically functions the same
as the generic syscon-poweroff.c to which we have already switched.
So let's remove it.

Cc: Robin Gong <yibin.gong@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
power: reset: Default POWER_RESET_BRCMSTB to BMIPS_GENERIC 2017-06-08T11:05:30+00:00 Florian Fainelli f.fainelli@gmail.com 2017-05-31T20:39:46+00:00 1d2495e8c2d976208e8bb52d52b4e529e3b1ff75 On Broadcom MIPS STB platforms, BMIPS_GENERIC is the Kconfig symbol that is used, make this reboot driver default to that value to make sure we can reboot a system properly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> 
On Broadcom MIPS STB platforms, BMIPS_GENERIC is the Kconfig symbol that
is used, make this reboot driver default to that value to make sure we
can reboot a system properly.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
power: reset: Allow selecting POWER_RESET_BRCMSTB on ARM64 2017-06-08T11:05:29+00:00 Florian Fainelli f.fainelli@gmail.com 2017-05-31T20:39:45+00:00 12031fcae9e74f582579c71c3b2a78cc82ad6c3c Since commit 37eb56dc79a8 ("arm64: Add Broadcom Set Top Box Kconfig entry point") we have ARCH_BRCMSTB also visible on ARM64 platform, yet this reboot driver was not selectable, so fix that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> 
Since commit 37eb56dc79a8 ("arm64: Add Broadcom Set Top Box Kconfig
entry point") we have ARCH_BRCMSTB also visible on ARM64 platform, yet
this reboot driver was not selectable, so fix that.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
power: reset: Add a driver for the Gemini poweroff 2017-04-13T23:41:33+00:00 Linus Walleij linus.walleij@linaro.org 2017-03-12T22:36:21+00:00 f7a388d6cd1ccebfe7d2850ae4d33f84e954e96b The Gemini (SL3516) SoC has a special power controller block that only deal with shutting down the system. If you do not register a driver and activate the block, the power button on the systems utilizing this SoC will do an uncontrolled power cut, which is why it is important to have a special poweroff driver. The most basic functionality is to just shut down the system by writing a special bit in the control register after the system has reached pm_poweroff. It also handles the poweroff from a button or other sources: When the poweroff button is pressed, or a signal is sent to poweroff from an infrared remote control, or when the RTC fires a special alarm (!) the system emits an interrupt. At this point, Linux must acknowledge the interrupt and proceed to do an orderly shutdown of the system. After adding this driver, pressing the poweroff button gives this dmesg: root@gemini:/ root@gemini:/ gemini-poweroff 4b000000.power-controller: poweroff button pressed calling shutdown scripts.. setting /dev/rtc0 from system time unmounting file systems... umount: tmpfs busy - remounted read-only umount: can't unmount /: Invalid argument The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes Requesting system poweroff uhci_hcd 0000:00:09.1: HCRESET not completed yet! uhci_hcd 0000:00:09.0: HCRESET not completed yet! reboot: Power down gemini-poweroff 4b000000.power-controller: Gemini power off Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-pm@vger.kernel.org Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sre@kernel.org> 
The Gemini (SL3516) SoC has a special power controller block
that only deal with shutting down the system.

If you do not register a driver and activate the block, the
power button on the systems utilizing this SoC will do an
uncontrolled power cut, which is why it is important to have
a special poweroff driver.

The most basic functionality is to just shut down the system
by writing a special bit in the control register after the
system has reached pm_poweroff.

It also handles the poweroff from a button or other sources:

When the poweroff button is pressed, or a signal is sent to
poweroff from an infrared remote control, or when the RTC
fires a special alarm (!) the system emits an interrupt.
At this point, Linux must acknowledge the interrupt and
proceed to do an orderly shutdown of the system.

After adding this driver, pressing the poweroff button gives
this dmesg:

root@gemini:/
root@gemini:/ gemini-poweroff 4b000000.power-controller:
poweroff button pressed

calling shutdown scripts..
setting /dev/rtc0 from system time
unmounting file systems...
umount: tmpfs busy - remounted read-only
umount: can't unmount /: Invalid argument
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system poweroff
uhci_hcd 0000:00:09.1: HCRESET not completed yet!
uhci_hcd 0000:00:09.0: HCRESET not completed yet!
reboot: Power down
gemini-poweroff 4b000000.power-controller: Gemini power off

Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-pm@vger.kernel.org
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
power: reset: at91-poweroff: timely shutdown LPDDR memories 2017-01-16T22:21:33+00:00 Alexandre Belloni alexandre.belloni@free-electrons.com 2016-10-25T09:37:59+00:00 0b0408745e7ff24757cbfd571d69026c0ddb803c LPDDR memories can only handle up to 400 uncontrolled power off. Ensure the proper power off sequence is used before shutting down the platform. Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> 
LPDDR memories can only handle up to 400 uncontrolled power off. Ensure the
proper power off sequence is used before shutting down the platform.

Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
power: reset: Add Intel PIIX4 poweroff driver 2016-10-18T03:13:37+00:00 Paul Burton paul.burton@imgtec.com 2016-09-28T15:30:56+00:00 29676833df1d9207cb665fe9869f6778a96045b9 Add a driver which allows powering off the system via an Intel PIIX4 southbridge, by entering the PIIX4 SOff state. This is useful on the MIPS Malta development board, where it will power down the FPGA based board until its ON/NMI button is pressed, or the QEMU implementation of the MIPS Malta board where it will cause QEMU to exit. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-pm@vger.kernel.org Signed-off-by: Sebastian Reichel <sre@kernel.org> 
Add a driver which allows powering off the system via an Intel PIIX4
southbridge, by entering the PIIX4 SOff state. This is useful on the
MIPS Malta development board, where it will power down the FPGA based
board until its ON/NMI button is pressed, or the QEMU implementation of
the MIPS Malta board where it will cause QEMU to exit.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Sebastian Reichel <sre@kernel.org>