linux-stable.git/drivers/power/Makefile, branch linux-3.19.y Linux kernel stable tree power: add driver for battery reading on iPaq h3xxx 2014-07-24T14:20:17+00:00 Dmitry Artamonow mad_soft@inbox.ru 2014-07-24T14:00:32+00:00 00a588f9d27fc64f0c64dcd4abc8e35ed331afb8 This adds a driver for reading the battery status of the battery connected to the Atmel microcontroller on the iPAQ h3xxx series. Based on a driver from handhelds.org 2.6.21 kernel, written by Alessandro GARDICH. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sre@kernel.org> 
This adds a driver for reading the battery status of the
battery connected to the Atmel microcontroller on the
iPAQ h3xxx series.

Based on a driver from handhelds.org 2.6.21 kernel, written
by Alessandro GARDICH.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
power_supply: Add charger support for Maxim 14577 2013-12-24T02:52:19+00:00 Krzysztof Kozlowski k.kozlowski@samsung.com 2013-12-06T11:32:12+00:00 55e6470120b2cb94700e2cb97077dfe9a5744244 MAX14577 chip is a multi-function device which includes MUIC, charger and voltage regulator. The driver is located in drivers/mfd. This patch supports battery charging control of MAX14577 chip and provides power supply class information to userspace. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org> 
MAX14577 chip is a multi-function device which includes MUIC, charger and
voltage regulator. The driver is located in drivers/mfd.

This patch supports battery charging control of MAX14577 chip and provides
power supply class information to userspace.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
power_supply: Add support for bq24735 charger 2013-10-25T22:56:51+00:00 Darbha Sriharsha dsriharsha@nvidia.com 2013-10-11T21:15:43+00:00 ce77399226313a72578b5b0d67e289d3f165b8ba Adds support for the bq24735 charger chipset. The bq24735 is a high-efficiency, synchronous battery charger. It allows control of the charging current, input current, and the charger voltage DAC's through SMBus. Signed-off-by: Darbha Sriharsha <dsriharsha@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Thanks-to: Stephen Warren <swarren@wwwdotorg.org> Thanks-to: Thierry Reding <thierry.reding@gmail.com> Thanks-to: Manish Badarkhe <badarkhe.manish@gmail.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org> 
Adds support for the bq24735 charger chipset. The bq24735 is a
high-efficiency, synchronous battery charger.

It allows control of the charging current, input current, and the charger
voltage DAC's through SMBus.

Signed-off-by: Darbha Sriharsha <dsriharsha@nvidia.com>
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Thanks-to: Stephen Warren <swarren@wwwdotorg.org>
Thanks-to: Thierry Reding <thierry.reding@gmail.com>
Thanks-to: Manish Badarkhe <badarkhe.manish@gmail.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
power: Add twl4030_madc battery driver. 2013-08-31T00:34:52+00:00 Marek Belisko marek@goldelico.com 2013-08-29T09:41:52+00:00 da0a00ebc239e852a504abfce2ad98957434ae58 This driver is used and tested on gta04 phone. It's using twl4030_madc (similar to rx51 existing driver). Driver also implement charging and discharging calibration data so user can define ranges and level. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Lukas Märdian <lukas@goldelico.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org> 
This driver is used and tested on gta04 phone. It's using twl4030_madc
(similar to rx51 existing driver). Driver also implement charging and
discharging calibration data so user can define ranges and level.

Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Lukas Märdian <lukas@goldelico.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
bq24190_charger: Add support for TI BQ24190 Battery Charger 2013-08-28T01:17:54+00:00 Mark A. Greer mgreer@animalcreek.com 2013-08-24T02:21:03+00:00 d7bf353fd0aa3e12060ce64c8a7b4aaf4336145c Add driver support for the Texas Instruments BQ24190 battery charger. Some of the information provided by the device is about the charger and other information is about the battery so create two power_supply objects (one for each) and provide the appropriate information for each one. The device has many fields that go beyond what is reasonable to report or modify using the existing 'POWER_SUPPLY_PROP_*' properties so the driver exports the register fields via sysfs. They are prefixed by 'f_' (for 'field') to make it easier to distinguish between a register field and a "normal" sysfs file exported by the power_supply infrastructure. Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org> 
Add driver support for the Texas Instruments BQ24190 battery charger.
Some of the information provided by the device is about the charger and
other information is about the battery so create two power_supply objects
(one for each) and provide the appropriate information for each one.

The device has many fields that go beyond what is reasonable to report or
modify using the existing 'POWER_SUPPLY_PROP_*' properties so the driver
exports the register fields via sysfs.  They are prefixed by 'f_' (for
'field') to make it easier to distinguish between a register field and a
"normal" sysfs file exported by the power_supply infrastructure.

Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
power_supply: Add support for tps65090-charger 2013-03-19T02:20:05+00:00 Rhyland Klein rklein@nvidia.com 2013-03-12T22:08:09+00:00 6f8da5df8c451103e0043f73a00c90676da6be9e This patch adds support for the tps65090 charger driver. This driver is responsible for controlling the charger aspect of the tps65090 mfd. Currently, this mainly consists of turning on and off the charger, but some features of the charger can be supported through this driver including: - Enable Auto Recharge based on Battery voltage - Fast Charge Safety Timer - Maximum battery discharge current - Maximum battery adapter current - Enable External Charge - Disable charging termination based on low charger current (supported) Once the driver is accepted, later patches can add support for the features above which are not yet supported. Based on work by: Syed Rafiuddin <srafiuddin@nvidia.com> Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org> 
This patch adds support for the tps65090 charger driver. This driver is
responsible for controlling the charger aspect of the tps65090 mfd.
Currently, this mainly consists of turning on and off the charger, but
some features of the charger can be supported through this driver
including:

- Enable Auto Recharge based on Battery voltage
- Fast Charge Safety Timer
- Maximum battery discharge current
- Maximum battery adapter current
- Enable External Charge
- Disable charging termination based on low charger current (supported)

Once the driver is accepted, later patches can add support for the
features above which are not yet supported.

Based on work by:

  Syed Rafiuddin <srafiuddin@nvidia.com>
  Laxman Dewangan <ldewangan@nvidia.com>

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
pm2301-charger: Always compile the PM2301 Charger driver with AB8500 Battery Mgnt 2013-03-07T04:35:46+00:00 Marcus Cooper marcus.xm.cooper@stericsson.com 2012-08-10T10:59:06+00:00 405fea1c6691eb8259f2ca879c9348a4cf5d898d The PM2301 Charger should always be available when using the AB8500 Battery Management system, we're ensuring this will be the case. Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Hakan BERG <hakan.berg@stericsson.com> Reviewed-by: Mian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com> 
The PM2301 Charger should always be available when using the AB8500
Battery Management system, we're ensuring this will be the case.

Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Hakan BERG <hakan.berg@stericsson.com>
Reviewed-by: Mian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com>
Merge branch 'tb-power-2' of git://git.linaro.org/people/ljones/linux-3.0-ux500 2013-02-03T03:29:13+00:00 Anton Vorontsov anton@enomsg.org 2013-02-03T03:25:57+00:00 58a1c154d449aae97a8ecad67ddbfd4024ac8446 Pull a huge ab8500/pm2301 pile of changes from Lee Jones. Lee did an awesome job cleaning this stuff up and thus brought ab8500 Stericsson's development tree much closer to the mainline. Even more changes to come, though. Conflicts: drivers/power/Kconfig 
Pull a huge ab8500/pm2301 pile of changes from Lee Jones. Lee did an
awesome job cleaning this stuff up and thus brought ab8500 Stericsson's
development tree much closer to the mainline. Even more changes to come,
though.

Conflicts:
	drivers/power/Kconfig
power: Add battery driver for goldfish emulator 2013-02-03T03:06:34+00:00 Mike Lockwood lockwood@android.com 2013-01-25T15:30:00+00:00 84d7b768748943db2bb658b43931fdab04c224cc Add the emulated power driver for the Goldfish platform. This folds together the code from the Google tree, Jun Nakajima's cleanups and x86 porting work, and then a tidy up to pass checkpatch. Signed-off-by: Mike A. Chan <mikechan@google.com> [cleanup and x86 support] Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Xiaohui Xin <xiaohui.xin@intel.com> Signed-off-by: Jun Nakajima <jun.nakajima@intel.com> Signed-off-by: Bruce Beare <bruce.j.beare@intel.com> [ported to 3.4] Signed-off-by: Tom Keel <thomas.keel@intel.com> [ported to 3.7 and final tidy] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org> 
Add the emulated power driver for the Goldfish platform.

This folds together the code from the Google tree, Jun Nakajima's cleanups
and x86 porting work, and then a tidy up to pass checkpatch.

Signed-off-by: Mike A. Chan <mikechan@google.com>
[cleanup and x86 support]
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: Xiaohui Xin <xiaohui.xin@intel.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Bruce Beare <bruce.j.beare@intel.com>
[ported to 3.4]
Signed-off-by: Tom Keel <thomas.keel@intel.com>
[ported to 3.7 and final tidy]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
pm2301: Provide u9540 support for the pm2301 charger 2013-01-23T11:33:02+00:00 Michel JAOUEN michel.jaouen@stericsson.com 2012-04-26T08:00:04+00:00 01ec8c5423901c4fe8d97f786ed9a0c31215b53a AC charger driver for the DB9540 based platforms. Signed-off-by: Rajkumar Kasirajan <rajkumar.kasirajan@stericsson.com> Signed-off-by: Loic Pallardy <loic.pallardy@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Michel JAOUEN <michel.jaouen@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> 
AC charger driver for the DB9540 based platforms.

Signed-off-by: Rajkumar Kasirajan <rajkumar.kasirajan@stericsson.com>
Signed-off-by: Loic Pallardy <loic.pallardy@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com>