linux-stable.git/drivers/power/Kconfig, branch v4.2

power_supply: Add support for Richtek RT9455 battery charger

2015-05-30T01:34:55+00:00

Based on the datasheet found here:
http://www.richtek.com/download_ds.jsp?p=RT9455

Signed-off-by: Anda-Maria Nicolae 
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: Sebastian Reichel

power: axp288_charger: axp288 charger driver

2015-05-24T08:32:24+00:00

This patch adds new power supply charger driver support
for X-Power AXP288 PMIC integrated charger.

This driver interfaces with the axp20x mfd driver as a cell
and listens to extcon cable events for setting up charging.

Signed-off-by: Ramakrishna Pallala 
Acked-by: Lee Jones 
Signed-off-by: Sebastian Reichel

power_supply: Add support for TI BQ25890 charger chip

2015-05-23T19:31:26+00:00

More details about the chip can be found here:
http://www.ti.com/product/bq25890

Signed-off-by: Laurentiu Palcu 
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: Sebastian Reichel

power_supply: Add TI BQ24257 charger driver

2015-05-23T16:54:34+00:00

Based on the datasheet found here:
http://www.ti.com/lit/ds/symlink/bq24257.pdf

Signed-off-by: Laurentiu Palcu 
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: Sebastian Reichel

X-Power AXP288 PMIC Fuel Gauge Driver

2015-03-07T19:08:58+00:00

New power_supply driver at driver/power which interfaces with the
axp20x mfd driver as a cell. Provides battery info, monitors for
changes, and generates alerts on temperature and capacity issues

Signed-off-by: Todd Brandt 
Acked-by:  Jacob Pan 
Signed-off-by: Sebastian Reichel

power: Add support for DA9150 Charger

2015-02-25T20:18:14+00:00

This patch adds support for DA9150 Charger & Fuel-Gauge IC Charger.

Signed-off-by: Adam Thomson 
Signed-off-by: Sebastian Reichel

Add LTC2941/LTC2943 Battery Gauge Driver

2015-01-22T02:23:07+00:00

Both the LTC2941 and LTC2943 measure battery capacity.
The LTC2943 is compatible with the LTC2941, it adds voltage and
temperature monitoring, and uses a slightly different conversion
formula for the charge counter.

To avoid confusion with e.g. the LTC2945, the driver is called
LTC2941 instead of LTC294X.

v2: Fix units of measurement: uV, uA and centidegrees.
v3: Correctly set configuration register. Allow negative values
    for the sense resistor.
v4: Run checkpatch.pl and fix all errors and warnings.
v5: Prefix "lltc," to devicetree properties.

Signed-off-by: Mike Looijmans 
[ removed .owner field ]
Signed-off-by: Sebastian Reichel

power: charger-manager: Use alarmtimer for battery monitoring in suspend.

2015-01-21T19:52:07+00:00

To guerantee proper charing and managing batteries even in suspend,
charger-manager has used rtc device with rtc framework interface.
However, it is better to use alarmtimer for cleaner and more appropriate
operation.
This patch makes driver to use alarmtimer for polling work in suspend and
removes all deprecated codes related with using rtc interface.

Signed-off-by: Jonghwa Lee 
Signed-off-by: Sebastian Reichel

power: max14577: Remove SYSFS dependency from Kconfig

2015-01-21T18:36:57+00:00

This is only a small clean-up. The driver can be built without SYSFS
as there exist stubs for used functions.

Signed-off-by: Karol Wrona 
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: Sebastian Reichel

power: max77693: Add charger driver for Maxim 77693

2015-01-20T13:04:12+00:00

Add new driver for Maxim 77693 switch-mode charger (part of max77693
MFD driver) providing power supply class information to userspace.

The charger has +20V tolerant input. Current input can be set from 0 to
2.58 A. The charger can deliver up to 2.1 A to the battery or 3.5 A to
the system (when supplying additional current from battery to system).

The driver is configured through DTS (battery and system related
settings) and sysfs entries (timers and top-off charging threshold).

Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Sebastian Reichel