linux-stable.git/drivers/pnp, branch v4.0.2

Merge branches 'pnp', 'pm-cpuidle' and 'pm-cpufreq'

2015-02-21T03:29:16+00:00

* pnp:
  PNP: Switch from __check_region() to __request_region()

* pm-cpuidle:
  cpuidle: powernv: Avoid endianness conversions while parsing DT
  cpuidle: powernv: Read target_residency value of idle states from DT if available

* pm-cpufreq:
  cpufreq: s3c: remove last use of resume_clocks callback
  cpufreq: s3c: remove incorrect __init annotations

Merge tag 'tty-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2015-02-15T19:37:02+00:00

Pull tty/serial driver patches from Greg KH:
 "Here's the big tty/serial driver update for 3.20-rc1.  Nothing huge
  here, just lots of driver updates and some core tty layer fixes as
  well.  All have been in linux-next with no reported issues"

* tag 'tty-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
  serial: 8250: Fix UART_BUG_TXEN workaround
  serial: driver for ETRAX FS UART
  tty: remove unused variable sprop
  serial: of-serial: fetch line number from DT
  serial: samsung: earlycon support depends on CONFIG_SERIAL_SAMSUNG_CONSOLE
  tty/serial: serial8250_set_divisor() can be static
  tty/serial: Add Spreadtrum sc9836-uart driver support
  Documentation: DT: Add bindings for Spreadtrum SoC Platform
  serial: samsung: remove redundant interrupt enabling
  tty: Remove external interface for tty_set_termios()
  serial: omap: Fix RTS handling
  serial: 8250_omap: Use UPSTAT_AUTORTS for RTS handling
  serial: core: Rework hw-assisted flow control support
  tty/serial: 8250_early: Add support for PXA UARTs
  tty/serial: of_serial: add support for PXA/MMP uarts
  tty/serial: of_serial: add DT alias ID handling
  serial: 8250: Prevent concurrent updates to shadow registers
  serial: 8250: Use canary to restart console after suspend
  serial: 8250: Refactor XR17V35X divisor calculation
  serial: 8250: Refactor divisor programming
  ...

Merge tag 'char-misc-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2015-02-15T18:48:44+00:00

Pull char / misc patches from Greg KH:
 "Here's the big char/misc driver update for 3.20-rc1.

  Lots of little things in here, all described in the changelog.
  Nothing major or unusual, except maybe the binder selinux stuff, which
  was all acked by the proper selinux people and they thought it best to
  come through this tree.

  All of this has been in linux-next with no reported issues for a while"

* tag 'char-misc-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits)
  coresight: fix function etm_writel_cp14() parameter order
  coresight-etm: remove check for unknown Kconfig macro
  coresight: fixing CPU hwid lookup in device tree
  coresight: remove the unnecessary function coresight_is_bit_set()
  coresight: fix the debug AMBA bus name
  coresight: remove the extra spaces
  coresight: fix the link between orphan connection and newly added device
  coresight: remove the unnecessary replicator property
  coresight: fix the replicator subtype value
  pdfdocs: Fix 'make pdfdocs' failure for 'uio-howto.tmpl'
  mcb: Fix error path of mcb_pci_probe
  virtio/console: verify device has config space
  ti-st: clean up data types (fix harmless memory corruption)
  mei: me: release hw from reset only during the reset flow
  mei: mask interrupt set bit on clean reset bit
  extcon: max77693: Constify struct regmap_config
  extcon: adc-jack: Release IIO channel on driver remove
  extcon: Remove duplicated include from extcon-class.c
  Drivers: hv: vmbus: hv_process_timer_expiration() can be static
  Drivers: hv: vmbus: serialize Offer and Rescind offer
  ...

ACPI: Return translation offset when parsing ACPI address space resources

2015-02-03T21:27:21+00:00

Change function acpi_dev_resource_address_space() and
acpi_dev_resource_ext_address_space() to return address space
translation offset.

It's based on a patch from Yinghai Lu .

Signed-off-by: Jiang Liu 
Signed-off-by: Rafael J. Wysocki

PNP: Allow console to override ACPI device sleep

2015-02-02T18:11:25+00:00

If the serial console is an ACPI PNP device, the PNP bus always powers
down the device at system suspend, even though the no_console_suspend
command line parameter is specified (eg., when debugging suspend/resume).

Add PNP_CONSOLE capability, which when set, prevents calling both the
->disable() and ->suspend() PNP protocol methods if console suspend
is disabled.

Signed-off-by: Peter Hurley 
Signed-off-by: Greg Kroah-Hartman

ACPICA: Resources: Provide common part for struct acpi_resource_address structures.

2015-01-26T15:09:56+00:00

struct acpi_resource_address and struct acpi_resource_extended_address64 share substracts
just at different offsets. To unify the parsing functions, OSPMs like Linux
need a new ACPI_ADDRESS64_ATTRIBUTE as their substructs, so they can
extract the shared data.

This patch also synchronizes the structure changes to the Linux kernel.
The usages are searched by matching the following keywords:
1. acpi_resource_address
2. acpi_resource_extended_address
3. ACPI_RESOURCE_TYPE_ADDRESS
4. ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS
And we found and fixed the usages in the following files:
 arch/ia64/kernel/acpi-ext.c
 arch/ia64/pci/pci.c
 arch/x86/pci/acpi.c
 arch/x86/pci/mmconfig-shared.c
 drivers/xen/xen-acpi-memhotplug.c
 drivers/acpi/acpi_memhotplug.c
 drivers/acpi/pci_root.c
 drivers/acpi/resource.c
 drivers/char/hpet.c
 drivers/pnp/pnpacpi/rsparser.c
 drivers/hv/vmbus_drv.c

Build tests are passed with defconfig/allnoconfig/allyesconfig and
defconfig+CONFIG_ACPI=n.

Original-by: Thomas Gleixner 
Original-by: Jiang Liu 
Signed-off-by: Lv Zheng 
Signed-off-by: Rafael J. Wysocki

pnpbios: bail out on strange errors

2015-01-25T17:17:59+00:00

A small number of systems respond to PnP dock queries with bogus values.
This causes us to keep logging an error every 2 seconds. Instead of trying
again just assume the BIOS is crapware and doesn't actually have dock
functionality.

Signed-off-by: Alan Cox 
Signed-off-by: Greg Kroah-Hartman

PNP: Switch from __check_region() to __request_region()

2015-01-22T00:14:50+00:00

PNP core is the last user of the __check_region() which has been
deprecated for almost 12 years (since v2.5.54). Replace it with a combo
of __request_region() followed by __release_region().

pnp_check_port() and pnp_check_mem() remain racy after this change.

Signed-off-by: Jakub Sitnicki 
Signed-off-by: Rafael J. Wysocki

PNP: replace strnicmp with strncasecmp

2014-10-14T00:18:25+00:00

The kernel used to contain two functions for length-delimited,
case-insensitive string comparison, strnicmp with correct semantics and
a slightly buggy strncasecmp.  The latter is the POSIX name, so strnicmp
was renamed to strncasecmp, and strnicmp made into a wrapper for the new
strncasecmp to avoid breaking existing users.

To allow the compat wrapper strnicmp to be removed at some point in the
future, and to avoid the extra indirection cost, do
s/strnicmp/strncasecmp/g.

Signed-off-by: Rasmus Villemoes 
Cc: "Rafael J. Wysocki" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ACPI / PNP: Use ACPI_COMPANION() instead of ACPI_HANDLE()

2014-07-22T23:03:06+00:00

The ACPI_HANDLE() macro evaluates ACPI_COMPANION() internally to
return the handle of the device's ACPI companion, so it is much
more straightforward and efficient to use ACPI_COMPANION()
directly to obtain the device's ACPI companion object instead of
using ACPI_HANDLE() and acpi_bus_get_device() on the returned
handle for the same thing.

Do that in several places in the ACPI PNP core code.

Also use acpi_device_set_power() and acpi_device_power_manageable()
instead of acpi_bus_set_power() and acpi_bus_power_manageable(),
respectively, because the former two are more efficient if the
ACPI device object is already available.

Signed-off-by: Rafael J. Wysocki