linux-stable.git/drivers/pnp, branch linux-3.10.y

ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage

2017-06-07T22:47:06+00:00

commit 0294112ee3135fbd15eaa70015af8283642dd970 upstream.

This effectively reverts the following three commits:

 7bc10388ccdd ACPI / resources: free memory on error in add_region_before()
 0f1b414d1907 ACPI / PNP: Avoid conflicting resource reservations
 b9a5e5e18fbf ACPI / init: Fix the ordering of acpi_reserve_resources()

(commit b9a5e5e18fbf introduced regressions some of which, but not
all, were addressed by commit 0f1b414d1907 and commit 7bc10388ccdd
was a fixup on top of the latter) and causes ACPI fixed hardware
resources to be reserved at the fs_initcall_sync stage of system
initialization.

The story is as follows.  First, a boot regression was reported due
to an apparent resource reservation ordering change after a commit
that shouldn't lead to such changes.  Investigation led to the
conclusion that the problem happened because acpi_reserve_resources()
was executed at the device_initcall() stage of system initialization
which wasn't strictly ordered with respect to driver initialization
(and with respect to the initialization of the pcieport driver in
particular), so a random change causing the device initcalls to be
run in a different order might break things.

The response to that was to attempt to run acpi_reserve_resources()
as soon as we knew that ACPI would be in use (commit b9a5e5e18fbf).
However, that turned out to be too early, because it caused resource
reservations made by the PNP system driver to fail on at least one
system and that failure was addressed by commit 0f1b414d1907.

That fix still turned out to be insufficient, though, because
calling acpi_reserve_resources() before the fs_initcall stage of
system initialization caused a boot regression to happen on the
eCAFE EC-800-H20G/S netbook.  That meant that we only could call
acpi_reserve_resources() at the fs_initcall initialization stage
or later, but then we might just as well call it after the PNP
initalization in which case commit 0f1b414d1907 wouldn't be
necessary any more.

For this reason, the changes made by commit 0f1b414d1907 are reverted
(along with a memory leak fixup on top of that commit), the changes
made by commit b9a5e5e18fbf that went too far are reverted too and
acpi_reserve_resources() is changed into fs_initcall_sync, which
will cause it to be executed after the PNP subsystem initialization
(which is an fs_initcall) and before device initcalls (including
the pcieport driver initialization) which should avoid the initial
issue.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=100581
Link: http://marc.info/?t=143092384600002&r=1&w=2
Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831
Link: http://marc.info/?t=143389402600001&r=1&w=2
Fixes: b9a5e5e18fbf "ACPI / init: Fix the ordering of acpi_reserve_resources()"
Reported-by: Roland Dreier 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Willy Tarreau

ACPI / PNP: Avoid conflicting resource reservations

2017-06-07T22:47:06+00:00

commit 0f1b414d190724617eb1cdd615592fa8cd9d0b50 upstream.

Commit b9a5e5e18fbf "ACPI / init: Fix the ordering of
acpi_reserve_resources()" overlooked the fact that the memory
and/or I/O regions reserved by acpi_reserve_resources() may
conflict with those reserved by the PNP "system" driver.

If that conflict actually takes place, it causes the reservations
made by the "system" driver to fail while before commit b9a5e5e18fbf
all reservations made by it and by acpi_reserve_resources() would be
successful.  In turn, that allows the resources that haven't been
reserved by the "system" driver to be used by others (e.g. PCI) which
sometimes leads to functional problems (up to and including boot
failures).

To fix that issue, introduce a common resource reservation routine,
acpi_reserve_region(), to be used by both acpi_reserve_resources()
and the "system" driver, that will track all resources reserved by
it and avoid making conflicting requests.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831
Link: http://marc.info/?t=143389402600001&r=1&w=2
Fixes: b9a5e5e18fbf "ACPI / init: Fix the ordering of acpi_reserve_resources()"
Reported-by: Roland Dreier 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Willy Tarreau

asmlinkage, pnp: Make variables used from assembler code visible

2016-06-07T08:42:53+00:00

commit a99aa42d0253f033cbb85096d3f2bd82201321e6 upstream.

Mark variables referenced from assembler files visible.

This fixes compile problems with LTO.

Cc: Jaroslav Kysela 
Signed-off-by: Andi Kleen 
Link: http://lkml.kernel.org/r/1391845930-28580-4-git-send-email-ak@linux.intel.com
Signed-off-by: H. Peter Anvin 
Signed-off-by: Willy Tarreau

PNP / ACPI: proper handling of ACPI IO/Memory resource parsing failures

2014-03-24T04:38:22+00:00

commit 89935315f192abf7068d0044cefc84f162c3c81f upstream.

Before commit b355cee88e3b (ACPI / resources: ignore invalid ACPI
device resources), if acpi_dev_resource_memory()/acpi_dev_resource_io()
returns false, it means the the resource is not a memeory/IO resource.

But after commit b355cee88e3b, those functions return false if the
given memory/IO resource entry is invalid (the length of the resource
is zero).

This breaks pnpacpi_allocated_resource(), because it now recognizes
the invalid memory/io resources as resources of unknown type.  Thus
users see confusing warning messages on machines with zero length
ACPI memory/IO resources.

Fix the problem by rearranging pnpacpi_allocated_resource() so that
it calls acpi_dev_resource_memory() for memory type and IO type
resources only, respectively.

Fixes: b355cee88e3b (ACPI / resources: ignore invalid ACPI device resources)
Signed-off-by: Zhang Rui 
Reported-and-tested-by: Markus Trippelsdorf 
Reported-and-tested-by: Julian Wollrath 
Reported-and-tested-by: Paul Bolle 
[rjw: Changelog]
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

2013-05-02T17:16:16+00:00

Pull powerpc update from Benjamin Herrenschmidt:
 "The main highlights this time around are:

   - A pile of addition POWER8 bits and nits, such as updated
     performance counter support (Michael Ellerman), new branch history
     buffer support (Anshuman Khandual), base support for the new PCI
     host bridge when not using the hypervisor (Gavin Shan) and other
     random related bits and fixes from various contributors.

   - Some rework of our page table format by Aneesh Kumar which fixes a
     thing or two and paves the way for THP support.  THP itself will
     not make it this time around however.

   - More Freescale updates, including Altivec support on the new e6500
     cores, new PCI controller support, and a pile of new boards support
     and updates.

   - The usual batch of trivial cleanups & fixes"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (156 commits)
  powerpc: Fix build error for book3e
  powerpc: Context switch the new EBB SPRs
  powerpc: Turn on the EBB H/FSCR bits
  powerpc: Replace CPU_FTR_BCTAR with CPU_FTR_ARCH_207S
  powerpc: Setup BHRB instructions facility in HFSCR for POWER8
  powerpc: Fix interrupt range check on debug exception
  powerpc: Update tlbie/tlbiel as per ISA doc
  powerpc: Print page size info during boot
  powerpc: print both base and actual page size on hash failure
  powerpc: Fix hpte_decode to use the correct decoding for page sizes
  powerpc: Decode the pte-lp-encoding bits correctly.
  powerpc: Use encode avpn where we need only avpn values
  powerpc: Reduce PTE table memory wastage
  powerpc: Move the pte free routines from common header
  powerpc: Reduce the PTE_INDEX_SIZE
  powerpc: Switch 16GB and 16MB explicit hugepages to a different page table format
  powerpc: New hugepage directory format
  powerpc: Don't truncate pgd_index wrongly
  powerpc: Don't hard code the size of pte page
  powerpc: Save DAR and DSISR in pt_regs on MCE
  ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2013-05-02T00:51:54+00:00

Pull VFS updates from Al Viro,

Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).

7kloc removed.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
  don't bother with deferred freeing of fdtables
  proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
  proc: Make the PROC_I() and PDE() macros internal to procfs
  proc: Supply a function to remove a proc entry by PDE
  take cgroup_open() and cpuset_open() to fs/proc/base.c
  ppc: Clean up scanlog
  ppc: Clean up rtas_flash driver somewhat
  hostap: proc: Use remove_proc_subtree()
  drm: proc: Use remove_proc_subtree()
  drm: proc: Use minor->index to label things, not PDE->name
  drm: Constify drm_proc_list[]
  zoran: Don't print proc_dir_entry data in debug
  reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
  proc: Supply an accessor for getting the data from a PDE's parent
  airo: Use remove_proc_subtree()
  rtl8192u: Don't need to save device proc dir PDE
  rtl8187se: Use a dir under /proc/net/r8180/
  proc: Add proc_mkdir_data()
  proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
  proc: Move PDE_NET() to fs/proc/proc_net.c
  ...

proc: Supply PDE attribute setting accessor functions

2013-05-01T21:29:18+00:00

Supply accessor functions to set attributes in proc_dir_entry structs.

The following are supplied: proc_set_size() and proc_set_user().

Signed-off-by: David Howells 
Acked-by: Mauro Carvalho Chehab 
cc: linuxppc-dev@lists.ozlabs.org
cc: linux-media@vger.kernel.org
cc: netdev@vger.kernel.org
cc: linux-wireless@vger.kernel.org
cc: linux-pci@vger.kernel.org
cc: netfilter-devel@vger.kernel.org
cc: alsa-devel@alsa-project.org
Signed-off-by: Al Viro

Merge branch 'pnp'

2013-04-27T23:54:41+00:00

* pnp:
  pnp: use %*phC to dump small buffers
  isapnp: remove debug leftovers

pnp: use %*phC to dump small buffers

2013-04-23T14:25:03+00:00

Instead of pronting buffer byte-by-byte let's use native specificator
to do the job.

Signed-off-by: Andy Shevchenko 
Signed-off-by: Rafael J. Wysocki

isapnp: remove debug leftovers

2013-04-23T14:25:02+00:00

There are couple of #if 0's to avoid debug printing.  Remove them.

Signed-off-by: Andy Shevchenko 
Signed-off-by: Rafael J. Wysocki