linux-stable.git/drivers/platform, branch v6.6.27

platform/x86: intel-vbtn: Update tablet mode switch at end of probe

2024-04-13T11:07:40+00:00

[ Upstream commit 434e5781d8cd2d0ed512d920c6cdeba4b33a2e81 ]

ACER Vivobook Flip (TP401NAS) virtual intel switch is implemented as
follow:

   Device (VGBI)
   {
       Name (_HID, EisaId ("INT33D6") ...
       Name (VBDS, Zero)
       Method (_STA, 0, Serialized)  // _STA: Status ...
       Method (VBDL, 0, Serialized)
       {
           PB1E |= 0x20
           VBDS |= 0x40
       }
       Method (VGBS, 0, Serialized)
       {
           Return (VBDS) /* \_SB_.PCI0.SBRG.EC0_.VGBI.VBDS */
       }
       ...
    }

By default VBDS is set to 0. At boot it is set to clamshell (bit 6 set)
only after method VBDL is executed.

Since VBDL is now evaluated in the probe routine later, after the device
is registered, the retrieved value of VBDS was still 0 ("tablet mode")
when setting up the virtual switch.

Make sure to evaluate VGBS after VBDL, to ensure the
convertible boots in clamshell mode, the expected default.

Fixes: 26173179fae1 ("platform/x86: intel-vbtn: Eval VBDL after registering our notifier")
Signed-off-by: Gwendal Grignou 
Reviewed-by: Kuppuswamy Sathyanarayanan 
Reviewed-by: Hans de Goede 
Link: https://lore.kernel.org/r/20240329143206.2977734-3-gwendal@chromium.org
Reviewed-by: Ilpo Järvinen 
Signed-off-by: Ilpo Järvinen 
Signed-off-by: Sasha Levin

platform/x86: touchscreen_dmi: Add an extra entry for a variant of the Chuwi Vi8 tablet

2024-04-13T11:07:37+00:00

[ Upstream commit 1266e2efb7512dbf20eac820ca2ed34de6b1c3e7 ]

Signed-off-by: Alban Boyé 
Link: https://lore.kernel.org/r/20240227223919.11587-1-alban.boye@protonmail.com
Reviewed-by: Ilpo Järvinen 
Signed-off-by: Ilpo Järvinen 
Signed-off-by: Sasha Levin

platform/x86/intel/tpmi: Change vsec offset to u64

2024-04-03T13:28:31+00:00

[ Upstream commit 57221a07ff37ff356f9265acd228bc3c8744c8fc ]

The vsec offset can be 64 bit long depending on the PFS start. So change
type to u64. Also use 64 bit formatting for seq_printf.

Fixes: 47731fd2865f ("platform/x86/intel: Intel TPMI enumeration driver")
Signed-off-by: Srinivas Pandruvada 
Cc: stable@vger.kernel.org # v6.3+
Link: https://lore.kernel.org/r/20240305194644.2077867-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen 
Signed-off-by: Ilpo Järvinen 
Signed-off-by: Sasha Levin

platform/x86: x86-android-tablets: Fix acer_b1_750_goodix_gpios name

2024-03-26T22:19:12+00:00

[ Upstream commit 8215ca518164d35f10c0b5545c8bb80f538638b8 ]

The Acer B1 750 tablet used a Novatek NVT-ts touchscreen,
not a Goodix touchscreen.

Rename acer_b1_750_goodix_gpios to acer_b1_750_nvt_ts_gpios
to correctly reflect this.

Signed-off-by: Hans de Goede 
Link: https://lore.kernel.org/r/20240216201721.239791-5-hdegoede@redhat.com
Signed-off-by: Sasha Levin

platform/x86: p2sb: On Goldmont only cache P2SB and SPI devfn BAR

2024-03-26T22:19:09+00:00

[ Upstream commit aec7d25b497ce4a8d044e9496de0aa433f7f8f06 ]

On Goldmont p2sb_bar() only ever gets called for 2 devices, the actual P2SB
devfn 13,0 and the SPI controller which is part of the P2SB, devfn 13,2.

But the current p2sb code tries to cache BAR0 info for all of
devfn 13,0 to 13,7 . This involves calling pci_scan_single_device()
for device 13 functions 0-7 and the hw does not seem to like
pci_scan_single_device() getting called for some of the other hidden
devices. E.g. on an ASUS VivoBook D540NV-GQ065T this leads to continuous
ACPI errors leading to high CPU usage.

Fix this by only caching BAR0 info and thus only calling
pci_scan_single_device() for the P2SB and the SPI controller.

Fixes: 5913320eb0b3 ("platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe")
Reported-by: Danil Rybakov 
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218531
Tested-by: Danil Rybakov 
Signed-off-by: Hans de Goede 
Link: https://lore.kernel.org/r/20240304134356.305375-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin

platform/x86: thinkpad_acpi: Only update profile if successfully converted

2024-03-01T12:35:08+00:00

[ Upstream commit 427c70dec738318b7f71e1b9d829ff0e9771d493 ]

Randomly a Lenovo Z13 will trigger a kernel warning traceback from this
condition:

```
if (WARN_ON((profile < 0) || (profile >= ARRAY_SIZE(profile_names))))
```

This happens because thinkpad-acpi always assumes that
convert_dytc_to_profile() successfully updated the profile. On the
contrary a condition can occur that when dytc_profile_refresh() is called
the profile doesn't get updated as there is a -EOPNOTSUPP branch.

Catch this situation and avoid updating the profile. Also log this into
dynamic debugging in case any other modes should be added in the future.

Fixes: c3bfcd4c6762 ("platform/x86: thinkpad_acpi: Add platform profile support")
Signed-off-by: Mario Limonciello 
Link: https://lore.kernel.org/r/20240217022311.113879-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede 
Signed-off-by: Sasha Levin

platform/x86: touchscreen_dmi: Allow partial (prefix) matches for ACPI names

2024-03-01T12:35:00+00:00

commit dbcbfd662a725641d118fb3ae5ffb7be4e3d0fb0 upstream.

On some devices the ACPI name of the touchscreen is e.g. either
MSSL1680:00 or MSSL1680:01 depending on the BIOS version.

This happens for example on the "Chuwi Hi8 Air" tablet where the initial
commit's ts_data uses "MSSL1680:00" but the tablets from the github issue
and linux-hardware.org probe linked below both use "MSSL1680:01".

Replace the strcmp() match on ts_data->acpi_name with a strstarts()
check to allow using a partial match on just the ACPI HID of "MSSL1680"
and change the ts_data->acpi_name for the "Chuwi Hi8 Air" accordingly
to fix the touchscreen not working on models where it is "MSSL1680:01".

Note this drops the length check for I2C_NAME_SIZE. This never was
necessary since the ACPI names used are never more then 11 chars and
I2C_NAME_SIZE is 20 so the replaced strncmp() would always stop long
before reaching I2C_NAME_SIZE.

Link: https://linux-hardware.org/?computer=AC4301C0542A
Fixes: bbb97d728f77 ("platform/x86: touchscreen_dmi: Add info for the Chuwi Hi8 Air tablet")
Closes: https://github.com/onitake/gsl-firmware/issues/91
Cc: stable@vger.kernel.org
Reviewed-by: Kuppuswamy Sathyanarayanan 
Signed-off-by: Hans de Goede 
Link: https://lore.kernel.org/r/20240212120608.30469-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman

platform/x86: intel-vbtn: Stop calling "VBDL" from notify_handler

2024-03-01T12:35:00+00:00

commit 84c16d01ff219bc0a5dca5219db6b8b86a6854fb upstream.

Commit 14c200b7ca46 ("platform/x86: intel-vbtn: Fix missing
tablet-mode-switch events") causes 2 issues on the ThinkPad X1 Tablet Gen2:

1. The ThinkPad will wake up immediately from suspend
2. When put in tablet mode SW_TABLET_MODE reverts to 0 after about 1 second

Both these issues are caused by the "VBDL" ACPI method call added
at the end of the notify_handler.

And it never became entirely clear if this call is even necessary to fix
the issue of missing tablet-mode-switch events on the Dell Inspiron 7352.

Drop the "VBDL" ACPI method call again to fix the 2 issues this is
causing on the ThinkPad X1 Tablet Gen2.

Fixes: 14c200b7ca46 ("platform/x86: intel-vbtn: Fix missing tablet-mode-switch events")
Reported-by: Alexander Kobel 
Closes: https://lore.kernel.org/platform-driver-x86/295984ce-bd4b-49bd-adc5-ffe7c898d7f0@a-kobel.de/
Cc: regressions@lists.linux.dev
Cc: Arnold Gozum 
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede 
Tested-by: Alexander Kobel 
Link: https://lore.kernel.org/r/20240216203300.245826-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman

platform/x86: touchscreen_dmi: Add info for the TECLAST X16 Plus tablet

2024-03-01T12:34:50+00:00

[ Upstream commit 1abdf288b0ef5606f76b6e191fa6df05330e3d7e ]

Add touch screen info for TECLAST X16 Plus tablet.

Signed-off-by: Phoenix Chen 
Link: https://lore.kernel.org/r/20240126095308.5042-1-asbeltogf@gmail.com
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede 
Signed-off-by: Sasha Levin

platform/mellanox: mlxbf-tmfifo: Drop Tx network packet when Tx TmFIFO is full

2024-03-01T12:34:49+00:00

[ Upstream commit 8cbc756b802605dee3dd40019bd75960772bacf5 ]

Starting from Linux 5.16 kernel, Tx timeout mechanism was added
in the virtio_net driver which prints the "Tx timeout" warning
message when a packet stays in Tx queue for too long. Below is an
example of the reported message:

"[494105.316739] virtio_net virtio1 tmfifo_net0: TX timeout on
queue: 0, sq: output.0, vq: 0×1, name: output.0, usecs since
last trans: 3079892256".

This issue could happen when external host driver which drains the
FIFO is restared, stopped or upgraded. To avoid such confusing
"Tx timeout" messages, this commit adds logic to drop the outstanding
Tx packet if it's not able to transmit in two seconds due to Tx FIFO
full, which can be considered as congestion or out-of-resource drop.

This commit also handles the special case that the packet is half-
transmitted into the Tx FIFO. In such case, the packet is discarded
with remaining length stored in vring->rem_padding. So paddings with
zeros can be sent out when Tx space is available to maintain the
integrity of the packet format. The padded packet will be dropped on
the receiving side.

Signed-off-by: Liming Sun 
Reviewed-by: Ilpo Järvinen 
Link: https://lore.kernel.org/r/20240111173106.96958-1-limings@nvidia.com
Signed-off-by: Hans de Goede 
Signed-off-by: Sasha Levin