linux-stable.git/drivers/platform, branch v6.1.85

platform/x86: p2sb: On Goldmont only cache P2SB and SPI devfn BAR

2024-04-03T13:19:39+00:00

commit aec7d25b497ce4a8d044e9496de0aa433f7f8f06 upstream.

On Goldmont p2sb_bar() only ever gets called for 2 devices, the actual P2SB
devfn 13,0 and the SPI controller which is part of the P2SB, devfn 13,2.

But the current p2sb code tries to cache BAR0 info for all of
devfn 13,0 to 13,7 . This involves calling pci_scan_single_device()
for device 13 functions 0-7 and the hw does not seem to like
pci_scan_single_device() getting called for some of the other hidden
devices. E.g. on an ASUS VivoBook D540NV-GQ065T this leads to continuous
ACPI errors leading to high CPU usage.

Fix this by only caching BAR0 info and thus only calling
pci_scan_single_device() for the P2SB and the SPI controller.

Fixes: 5913320eb0b3 ("platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe")
Reported-by: Danil Rybakov 
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218531
Tested-by: Danil Rybakov 
Signed-off-by: Hans de Goede 
Link: https://lore.kernel.org/r/20240304134356.305375-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman

platform/x86: thinkpad_acpi: Only update profile if successfully converted

2024-03-01T12:26:37+00:00

[ Upstream commit 427c70dec738318b7f71e1b9d829ff0e9771d493 ]

Randomly a Lenovo Z13 will trigger a kernel warning traceback from this
condition:

```
if (WARN_ON((profile < 0) || (profile >= ARRAY_SIZE(profile_names))))
```

This happens because thinkpad-acpi always assumes that
convert_dytc_to_profile() successfully updated the profile. On the
contrary a condition can occur that when dytc_profile_refresh() is called
the profile doesn't get updated as there is a -EOPNOTSUPP branch.

Catch this situation and avoid updating the profile. Also log this into
dynamic debugging in case any other modes should be added in the future.

Fixes: c3bfcd4c6762 ("platform/x86: thinkpad_acpi: Add platform profile support")
Signed-off-by: Mario Limonciello 
Link: https://lore.kernel.org/r/20240217022311.113879-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede 
Signed-off-by: Sasha Levin

platform/x86: touchscreen_dmi: Allow partial (prefix) matches for ACPI names

2024-03-01T12:26:32+00:00

commit dbcbfd662a725641d118fb3ae5ffb7be4e3d0fb0 upstream.

On some devices the ACPI name of the touchscreen is e.g. either
MSSL1680:00 or MSSL1680:01 depending on the BIOS version.

This happens for example on the "Chuwi Hi8 Air" tablet where the initial
commit's ts_data uses "MSSL1680:00" but the tablets from the github issue
and linux-hardware.org probe linked below both use "MSSL1680:01".

Replace the strcmp() match on ts_data->acpi_name with a strstarts()
check to allow using a partial match on just the ACPI HID of "MSSL1680"
and change the ts_data->acpi_name for the "Chuwi Hi8 Air" accordingly
to fix the touchscreen not working on models where it is "MSSL1680:01".

Note this drops the length check for I2C_NAME_SIZE. This never was
necessary since the ACPI names used are never more then 11 chars and
I2C_NAME_SIZE is 20 so the replaced strncmp() would always stop long
before reaching I2C_NAME_SIZE.

Link: https://linux-hardware.org/?computer=AC4301C0542A
Fixes: bbb97d728f77 ("platform/x86: touchscreen_dmi: Add info for the Chuwi Hi8 Air tablet")
Closes: https://github.com/onitake/gsl-firmware/issues/91
Cc: stable@vger.kernel.org
Reviewed-by: Kuppuswamy Sathyanarayanan 
Signed-off-by: Hans de Goede 
Link: https://lore.kernel.org/r/20240212120608.30469-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman

platform/x86: intel-vbtn: Stop calling "VBDL" from notify_handler

2024-03-01T12:26:32+00:00

commit 84c16d01ff219bc0a5dca5219db6b8b86a6854fb upstream.

Commit 14c200b7ca46 ("platform/x86: intel-vbtn: Fix missing
tablet-mode-switch events") causes 2 issues on the ThinkPad X1 Tablet Gen2:

1. The ThinkPad will wake up immediately from suspend
2. When put in tablet mode SW_TABLET_MODE reverts to 0 after about 1 second

Both these issues are caused by the "VBDL" ACPI method call added
at the end of the notify_handler.

And it never became entirely clear if this call is even necessary to fix
the issue of missing tablet-mode-switch events on the Dell Inspiron 7352.

Drop the "VBDL" ACPI method call again to fix the 2 issues this is
causing on the ThinkPad X1 Tablet Gen2.

Fixes: 14c200b7ca46 ("platform/x86: intel-vbtn: Fix missing tablet-mode-switch events")
Reported-by: Alexander Kobel 
Closes: https://lore.kernel.org/platform-driver-x86/295984ce-bd4b-49bd-adc5-ffe7c898d7f0@a-kobel.de/
Cc: regressions@lists.linux.dev
Cc: Arnold Gozum 
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede 
Tested-by: Alexander Kobel 
Link: https://lore.kernel.org/r/20240216203300.245826-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman

platform/x86: touchscreen_dmi: Add info for the TECLAST X16 Plus tablet

2024-03-01T12:26:26+00:00

[ Upstream commit 1abdf288b0ef5606f76b6e191fa6df05330e3d7e ]

Add touch screen info for TECLAST X16 Plus tablet.

Signed-off-by: Phoenix Chen 
Link: https://lore.kernel.org/r/20240126095308.5042-1-asbeltogf@gmail.com
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede 
Signed-off-by: Sasha Levin

platform/x86: intel-uncore-freq: Fix types in sysfs callbacks

2024-02-01T00:17:08+00:00

commit 416de0246f35f43d871a57939671fe814f4455ee upstream.

When booting a kernel with CONFIG_CFI_CLANG, there is a CFI failure when
accessing any of the values under
/sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00:

  $ cat /sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00/max_freq_khz
  fish: Job 1, 'cat /sys/devices/system/cpu/int…' terminated by signal SIGSEGV (Address boundary error)

  $ sudo dmesg &| grep 'CFI failure'
  [  170.953925] CFI failure at kobj_attr_show+0x19/0x30 (target: show_max_freq_khz+0x0/0xc0 [intel_uncore_frequency_common]; expected type: 0xd34078c5

The sysfs callback functions such as show_domain_id() are written as if
they are going to be called by dev_attr_show() but as the above message
shows, they are instead called by kobj_attr_show(). kCFI checks that the
destination of an indirect jump has the exact same type as the prototype
of the function pointer it is called through and fails when they do not.

These callbacks are called through kobj_attr_show() because
uncore_root_kobj was initialized with kobject_create_and_add(), which
means uncore_root_kobj has a ->sysfs_ops of kobj_sysfs_ops from
kobject_create(), which uses kobj_attr_show() as its ->show() value.

The only reason there has not been a more noticeable problem until this
point is that 'struct kobj_attribute' and 'struct device_attribute' have
the same layout, so getting the callback from container_of() works the
same with either value.

Change all the callbacks and their uses to be compatible with
kobj_attr_show() and kobj_attr_store(), which resolves the kCFI failure
and allows the sysfs files to work properly.

Closes: https://github.com/ClangBuiltLinux/linux/issues/1974
Fixes: ae7b2ce57851 ("platform/x86/intel/uncore-freq: Use sysfs API to create attributes")
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Chancellor 
Reviewed-by: Sami Tolvanen 
Acked-by: Srinivas Pandruvada 
Link: https://lore.kernel.org/r/20240104-intel-uncore-freq-kcfi-fix-v1-1-bf1e8939af40@kernel.org
Signed-off-by: Hans de Goede 
[nathan: Fix conflicts due to lack of 9b8dea80e3cb in 6.1]
Signed-off-by: Nathan Chancellor 
Signed-off-by: Greg Kroah-Hartman

platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe

2024-02-01T00:17:07+00:00

commit 5913320eb0b3ec88158cfcb0fa5e996bf4ef681b upstream.

p2sb_bar() unhides P2SB device to get resources from the device. It
guards the operation by locking pci_rescan_remove_lock so that parallel
rescans do not find the P2SB device. However, this lock causes deadlock
when PCI bus rescan is triggered by /sys/bus/pci/rescan. The rescan
locks pci_rescan_remove_lock and probes PCI devices. When PCI devices
call p2sb_bar() during probe, it locks pci_rescan_remove_lock again.
Hence the deadlock.

To avoid the deadlock, do not lock pci_rescan_remove_lock in p2sb_bar().
Instead, do the lock at fs_initcall. Introduce p2sb_cache_resources()
for fs_initcall which gets and caches the P2SB resources. At p2sb_bar(),
refer the cache and return to the caller.

Before operating the device at P2SB DEVFN for resource cache, check
that its device class is PCI_CLASS_MEMORY_OTHER 0x0580 that PCH
specifications define. This avoids unexpected operation to other devices
at the same DEVFN.

Link: https://lore.kernel.org/linux-pci/6xb24fjmptxxn5js2fjrrddjae6twex5bjaftwqsuawuqqqydx@7cl3uik5ef6j/
Fixes: 9745fb07474f ("platform/x86/intel: Add Primary to Sideband (P2SB) bridge support")
Cc: stable@vger.kernel.org
Suggested-by: Andy Shevchenko 
Signed-off-by: Shin'ichiro Kawasaki 
Link: https://lore.kernel.org/r/20240108062059.3583028-2-shinichiro.kawasaki@wdc.com
Reviewed-by: Andy Shevchenko 
Reviewed-by: Ilpo Järvinen 
Tested-by Klara Modin 
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede 
Signed-off-by: Greg Kroah-Hartman

platform/x86/intel/vsec: Fix xa_alloc memory leak

2024-01-25T23:27:20+00:00

[ Upstream commit 8cbcc1dbf8a62c730fadd60de761e0658547a589 ]

Commit 936874b77dd0 ("platform/x86/intel/vsec: Add PCI error recovery
support to Intel PMT") added an xarray to track the list of vsec devices to
be recovered after a PCI error. But it did not provide cleanup for the list
leading to a memory leak that was caught by kmemleak.  Do xa_alloc() before
devm_add_action_or_reset() so that the list may be cleaned up with
xa_erase() in the release function.

Fixes: 936874b77dd0 ("platform/x86/intel/vsec: Add PCI error recovery support to Intel PMT")
Signed-off-by: David E. Box 
Reviewed-by: Ilpo Järvinen 
Link: https://lore.kernel.org/r/20231129222132.2331261-2-david.e.box@linux.intel.com
[hdegoede@redhat.com: Add missing xa_erase() on error-exit
Signed-off-by: Hans de Goede 
Signed-off-by: Sasha Levin

platform/x86/intel/vsec: Use mutex for ida_alloc() and ida_free()

2024-01-25T23:27:20+00:00

[ Upstream commit 9a90ea7d378486aa358330dafc7e8c3b27de4d84 ]

ID alloc and free functions don't have in built protection for parallel
invocation of ida_alloc() and ida_free(). With the current flow in the
vsec driver, there is no such scenario. But add mutex protection for
potential future changes.

Suggested-by: Hans de Goede 
Signed-off-by: Srinivas Pandruvada 
Link: https://lore.kernel.org/r/20230207125821.3837799-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede 
Stable-dep-of: 8cbcc1dbf8a6 ("platform/x86/intel/vsec: Fix xa_alloc memory leak")
Signed-off-by: Sasha Levin

platform/x86/intel/vsec: Support private data

2024-01-25T23:27:20+00:00

[ Upstream commit 4ec5d0231d2e4aebe41152d57c6b4f1e7ea14f08 ]

Add fields to struct intel_vsec_device, so that core module (which
creates aux bus devices) can pass private data to the client drivers.

For example there is one vsec device instance per CPU package. On a
multi package system, this private data can be used to pass the package
ID. This package id can be used by client drivers to change power
settings for a specific CPU package by targeting MMIO space of the
correct PCI device.

Signed-off-by: Srinivas Pandruvada 
Acked-by: David E. Box 
Link: https://lore.kernel.org/r/20230202010738.2186174-4-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede 
Stable-dep-of: 8cbcc1dbf8a6 ("platform/x86/intel/vsec: Fix xa_alloc memory leak")
Signed-off-by: Sasha Levin